why dont try yassinov optiflasher? make all from his server
Posts by jhon32
-
-
Language use like calling a less skilled person as "weak in spirit" is not something we like, but maybe it's a language issue??
Anyway I have suggested it before when a users don't have the skills needed and you do. Why not reach out an helping hand over TeamViewer??
It's so easy when you now what to do but it's also easy to forgot that we all started somewhere and with the help of others we sharpen our skills ;)
this is not solution with teamview !you need in frame time same comand of your maschine and pc ! for jtag is too hard when you dont have hardware suport
-
Display More
#
Hello jhon32
I followed your instructions.
The result is the same: FATAL ERROR.
I notice that the PEN is not read.
I think there is nothing to do.
I appreciate all your help. You were all impeccable.
Great solidarity. Thank you all.
Hugs.
#
not all usb flash drive is works !ytry diferent and smaller ,and not quiq format
-
Display More
#
Hello jhon32.
As suggested, if you are in the mood and time, I ask you to log in with TeamViewer on my PC.
If you accept, tell me what I should prepare:
- Folder with files (which ones?); or do you transfer?
- Box connections (mini-usb connected to the pc + hdmi connected to the tv + net network + sat cable to the tuner)?
I await your decision and the best time (I'm in Portugal).
When you are ready, I can send you by PM the TeamViewer data.
Thank you very much in advance.
#
you dont need conect with you with teamview , when you conect your dreambox leave only ethernet cable+ mini usb ,first time format your usb to exfat(
small <1gb,copy rescue loader to usb and put on your dreambox !after start puty
Start receiver and push ctrl+C to enter in cfe mode. Use usb stick for rescue file downloaded from internet.
ifconfig eth0 -auto
show devices
dir usbdisk0
boot usbdisk0:zImage-rescue-zImage-rescue-3.14-r0-dm900-20200227
this is bootloader, this mode is moore easy,good luck
-
this is alot help ,is enuf help
-
Display More
#
Hello, jhon32
I didn't understand: temp / windows? Is the same with jtag
Are you saying to simulate "jtag" by placing the files in that folder?
But the connection to the Box will not be made ...
Thank you very much for your help.
Hugs.
#
i make jtag for old dm500 and all files is on pc , i work with programs ,if you whant make a ideia i atached
must be like this
:~# flash-rescue /tmp/*.bin
Warning: Could not read CA!
Warning: Please consider updating your rescue loader!
Manufacturer ID: c2
Memory type : 20
Memory density : 19
read id ok
comparing 2847 sector
on you try all cable must be disconected like hdmi
Only if your receiver dont go in recovery mode
For rescue DM900 use usb cable and putty (serial port).
Start receiver and push ctrl+C to enter in cfe mode. Use usb stick for rescue file downloaded from internet.
ifconfig eth0 -auto
show devices
dir usbdisk0
boot usbdisk0:zImage-rescue-xxxxx
and usb must format in exfat normal,not quiq !eject from bar icons
-
temp /windows?is the same with jtag
-
Display More
#
Hello, dear jhon32
The cable is correct.
The connection is made correctly.
Confirmed with PUTTY.
After the connection is confirmed, the following error is obtained: FATAL ERROR - Boot 2nd image failed.
Thank you all.
Hugs.
#
try this ,install new rescue loader only via puty
1. Copy this .bin to /tmp
2. Open telnet and login (via the IP address)
(if you have no IP, then you must use the other way via Putty Serial)
3. flash-rescue /tmp/*.bin
4. Wait 3-5 minutes. Wait for DONE info!
5. Power OFF to 10 sec and power ON.
6. Done. You have new rescue loader.Display More#
Hello, dear jhon32
The cable is correct.
The connection is made correctly.
Confirmed with PUTTY.
After the connection is confirmed, the following error is obtained: FATAL ERROR - Boot 2nd image failed.
Thank you all.
Hugs.
#
-
you have before succes install image with micro usb cable? maybe you dont use corect cable
my friend ,dm900 not conect to pc with micro cable , i check now
-
Display More
#
Hello, dear jhon32, emosim and hecha71.
When I connect the cable to the service port, there is no sound.
#
In fact:
I had a problem viewing the Cable Channels with the C/T2 Tuner. Some channels appeared with multi-squares and others did not.
So I decided to send it to the representative of this Box in Portugal (DREAMPORTUGAL).
He charged himself for technical assistance, stating that everything was fine. And returned the Box.
When I received the Box and installed it, only after several attempts did it starting. I scanned the Cable + Sat channels.
When restarting, the Box no longer started, keeping the Red Led fixed.
I don't know what tests the Technicians did, not even what they installed to test the Box.
What I do know is that the Box was working well, only with the anomaly on some channels. And now, nothing works.
The technicians, refuse to admit responsibility.
They don't even want to receive the Box for verification, saying that the problem is in my installation. Which is false.
Thank you all.
Hugs.
#
-
when you conect cable to pc make one sound?you choice a port com? is show your cable conected to com port?
-
Display More
#
All these recovery procedures, I have already performed several times. Unsuccessfully.
I have the Pen formatted in FAT16, with the files "zImage-rescue-3.14-r0-dm900-20200227.bin" + "zImage-rescue-3.14-r0-dm900-20200227.bin".
I configured PUTTY as indicated. Withe the cable Mini-USB connected to the USB-PC. I got COM6 Bridge port.
Nothing action. Nothing but FATAL ERROR - BOOT 2nd image failed.
Unfortunately, I am unable to access the Box, nor obtain an IP.
Strong hug to all of you.
Thank you very much.
#
change pc ,and try again with micro usb ,with JapharFlasher,dream up,you dont need ip with cable on service port
-
Display More
#
Hello jhon32.
I thank you very much, for all your effort and interest in helping me.
I used the serial cable: Mini-usb DM900 to USB PC.
I got the COM Port.
I ran Putty - Serial.
I put the files "zImage-rescue-3.14-r0-dm900-20200227.bin" in PEN (FAT).
Nothing worked.
I just got:
FATAL ERROR
BOOT 2nd image failed.
It means that the Box has a corrupted file.
Thank you for your help and support.
Hug.
#
image from hire? always usb must be smal ,1gb!i find tutorial with 8 bit,fo this i see xp ,on xp qent change 32bit to 16 bit
https://www.dreamboxupdate.com…le/images/dm900/index.php
try and this tutorial from hir
-
Display More
#
Hello, hecha71.
Accordingly.
With this pandemic, it is very difficult to find someone with Windows XP.
Thanks and hugs.
#i
is better for jtag/upload ,but is ok windows 10, i see on one forum this:
Only if your receiver dont go in recovery mode
For rescue DM900 use usb cable and putty (serial port).
Start receiver and push ctrl+C to enter in cfe mode. Use usb stick for rescue file downloaded from internet.
ifconfig eth0 -auto
show devices
dir usbdisk0
boot usbdisk0:zImage-rescue-xxxxx
Then your receiver get in rescue mode and you can flash firmware.is from hire
-
Display More
#
Hello, hecha71.
The "jtag" is processor emulation.
I don't how to have it.
I would like to have your advice.
Thanks.
#
better change computer ,if you find one with xp is beter choice , lets jtag for later ,
-
Display More
#
Hello, hecha71.
I know my previous IP: 192.168.1.100.
But, I have nowhere to enter this command to force to obtain the IP.
Thanks.
#
and never you dont otain ip ,why not make jtag?you need bootloader for start !
more easy is with dreamup and microc able ,not work on one computer change it,only try
-
Display More
#
Hello hecha71.
I followed the instructions strictly.
But the result was not a happy one.
See in the images.
Please review the results, and tell me if there is a chance that I will "resurrect" the DM900.
Thank you very much.
Hugs.
#
try this metod
-
wht ? you have micro cable for conect ?
-
ok ,delete this disablecrccws = 1
and on server put this
reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0E00,1010,1801,2600,2602,2610
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000
-
put your oscam config hire
