Hello everyone, let me say THANK YOU first for all the posts everyone has put on here that has educated me enough to get this far.
I am running chenbro astra, with a TBS card. I am successfully receiving a good signal and a scan shows me the PVIDs etc of a transponder I believe I have a good PowerVu key for. I setup Chenbro Astra with a standard NewCAMd that it supports and point it at my dedicated Ubuntu box running a freshly compiled oscam-1.20 with emu. The moment I think i have the configuration correct oscam crashes. It just disappears and I can no longer reach the OScam web interface and the service is no longer running. I restart everything and I can then get back in and everything is good until i start a stream then BOOM crash and the service stops and nothing. I have enabled the highest logging possible and my logs just stop the moment it sees the receiver.
Starting with the Chenbro Astra config. Here is the Softcam config:
Here is my oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11581-798
# Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.conf.txt
[global]
logfile = /tmp/oscam.log
initial_debuglevel = 2
netprio = 1
nice = -1
maxlogsize = 4024
preferlocalcards = 1
readerrestartseconds = 3
block_same_ip = 0
block_same_name = 0
cwlogdir = /tmp/oscam_cw.log
emmlogdir = /tmp/oscam_emm.log
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,050F00,051A00;1811:003311,003315;1819:00006D;1884:000000
[cs378x]
port = 13001
suppresscmd08 = 1
[newcamd]
port = 12121@0000:000000
key = 0102030405060708091011121314
mgclient = 1
[cccam]
port = 12000
nodeid = 24D5EF28108C14E0
version = 2.3.0
reshare = 0
[streamrelay]
stream_relay_enabled = 0
stream_relay_ctab = 0E00
[webif]
httpport = 8888
httprefresh = 10
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
Here is the oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20_svn SVN r11594-798
# Read more: https://svn.streamboard.tv/osc…/doc/txt/oscam.server.txt
[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0402,0500,0604,0E00,1010,1801,2600,2602,2610
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000
auprovid = 000E00
Here is the oscam.services
[POWERVU_FAKE]
caid = 0x0E00
provid = 000000
[TANDBERG_FAKE]
caid = 1010
provid = 000000
[BISS_FAKE]
caid = 2600,FFFF
provid = 000000
[AFN_FAKE]
caid = 5604
provid = 000000
srvid = 0066,0067,0068,0069,006A,006B,006C,006D,0192,0191
Here is the oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.20_svn SVN r11594-798
# Read more: https://svn.streamboard.tv/osc…on/doc/txt/oscam.user.txt
[account]
user = Reciever
pwd = 1234
monlevel = 4
keepalive = 1
au = 1
group = 1,2,3,4,5,6,7,8,9,10
services = powervu_fake,tandberg_fake,biss_fake,afn_fake
max_connections = 10
And finally here is the appropriate section of the softcam.key file (the viacom one is the one i am after)
P 00530507 00 909DD8F17BCFA7 ;2590:03980:30000:H;SCRIPPS ;
P 00530507 01 B18FC4A6AC0859 ;2590:03980:30000:H;SCRIPPS ;
P 00530507 00 5BB685E40EAABD ;2590:04020:28000:H;DIRECTV ;
P 00530507 01 96D71BE6B2F98F ;2590:04020:28000:H;DIRECTV ;
P 39200192 00 236C98E9A3E196 ;2590:03920:30000:V;VIACOM ;
Here is what the OSCAM log file looks like during startup and then when i start the stream.
-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sat Sep 12 20:05:26 2020
-------------------------------------------------------------------------------
2020/09/12 20:05:26 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11581-798 (x86_64-linux-gnu)
2020/09/12 20:05:26 00000000 s debug_level=2
2020/09/12 20:05:26 00000000 s (main) System name = Linux
2020/09/12 20:05:26 00000000 s (main) Host name = xtv-cr-oscam-01
2020/09/12 20:05:26 00000000 s (main) Release = 4.15.0-117-generic
2020/09/12 20:05:26 00000000 s (main) Version = #118-Ubuntu SMP Fri Sep 4 20:02:41 UTC 2020
2020/09/12 20:05:26 00000000 s (main) Machine = x86_64
2020/09/12 20:05:26 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 22123
2020/09/12 20:05:26 00000000 s (config) services reloaded: 0 services freed, 4 services loaded, rejected 0
2020/09/12 20:05:26 00000000 s (emu) OSCam-Emu version 798
2020/09/12 20:05:26 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2020/09/12 20:05:26 00000000 s (main) signal handling initialized
2020/09/12 20:05:26 00000000 s (net) cs378x: initialized (fd=5, port=13001, prio=1 [ SO_PRIORITY IP_TOS ])
2020/09/12 20:05:26 00000000 s (net) newcamd: initialized (fd=6, port=12121, prio=1 [ SO_PRIORITY IP_TOS ])
2020/09/12 20:05:26 00000000 s (net) -> CAID: 0000 PROVID: 000000
2020/09/12 20:05:26 00000000 s (net) cccam: initialized (fd=7, port=12000, prio=1 [ SO_PRIORITY IP_TOS ])
2020/09/12 20:05:26 00000000 s (reader) emulator [emu] creating thread for device emulator
2020/09/12 20:05:26 00000000 s (main) waiting for local card init
2020/09/12 20:05:26 362F6329 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2020/09/12 20:05:26 782774AD h (webif) webif: decompressed 163377 bytes back into 398296 bytes
2020/09/12 20:05:26 782774AD h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2020/09/12 20:05:26 362F6329 r (reader) emulator [emu] card detected
2020/09/12 20:05:27 362F6329 r (reader) emulator [emu] found card system emu
2020/09/12 20:05:27 362F6329 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2020/09/12 20:05:27 362F6329 r (emu) Reading key file: /usr/local/etc/oscam/SoftCam.Key
2020/09/12 20:05:27 362F6329 r (emu) Total keys in memory: W:0 V:7 N:9 I:7 F:408 G:0 P:437 T:12 A:0
2020/09/12 20:05:28 00000000 s (main) init for all local cards done
2020/09/12 20:05:28 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2020/09/12 20:05:28 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2020/09/12 20:05:59 762EEE4E c (newcamd) client connected to 12121 port
2020/09/12 20:05:59 762EEE4E c (client) encrypted newcamd:12121-client 10.1.4.34 granted (Reciever, au=auto (1 reader))
2020/09/12 20:05:59 762EEE4E c (newcamd) user Reciever authenticated successfully (generic)
2020/09/12 20:05:59 762EEE4E c (newcamd) AU enabled for user Reciever on reader emulator
As you can see the "reciever" AKA my Chenbro Astra instance authenticates to OSCAM and thats it. Nothing. The service just stops.
HELP! I have been working and reading on this for two weeks now. I am more than willing to trade info, help others with whatever I can. I desperately need this working.
Thank you!
