If i install
HDMI Input Plugin DreamOS
I can active the HDMI IN entry but it works better with a dream OS Image, it is possible to have the setup,with an OpenPli image i haven't the setup option.
If i install
I can active the HDMI IN entry but it works better with a dream OS Image, it is possible to have the setup,with an OpenPli image i haven't the setup option.
For the developpers here is the crash.log:
OpenPLi Enigma2 crash log
crashdate=lun. avril 10 23:49:20 2023
compiledate=Mar 10 2023
skin=PLi-FullNightHD/skin.xml
sourcedate=2023-03-10
branch=develop
rev=4bf4d2b
component=Enigma2
stbmodel=dm920
kernelcmdline=bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
nimsockets=NIM Socket 0:
imageissue=openpli develop %h
REMOVE Peer dm920
REMOVE Peer dm920
REMOVE Peer dm920
TypeError: 'str' object cannot be interpreted as an integer
The above exception was the direct cause of the following exception:
SystemError: <function HdmiCec.keyEvent at 0xb24f2708> returned a result with an exception set
[ePyObject] (CallObject(<bound method HdmiCec.keyEvent of <Components.HdmiCec.HdmiCec object at 0xb2558850>>,(399, 1)) failed)
dmesg
<4>[12354.130658] VIDEO0: first pts 0x1da6e63d0
<4>[12354.250665] VIDEO0: apply delayed pause!
...
I tried to uninstall the movie cut editor pluging but i didn't see where. I uninstalled the movie cut apply pluging and i tried to unstall back it in the plugin manager but that wasn't possible, or not for the movie rename manager, he didn't find somethings to download...
The box crash and enigma2 restart when i'm using the movie cut editor...
Hello,
Thank you for your job. With this CCcam 2.3.9, with my misp box and with my arm box, i cant read my viacess 6 card.
With my arm box i never find a cccam who read my card, but with my mips box i have a cccam 2.3.8 who can read my card
Thank you for your answer.
But i don't think that's the problem, because on my mips box i can read my viacess 6 card with a CCcam 2.3.8, but in my arm box the CCcam 2.3.8 or 2.3.9 did'nt see my card, no problem with the oscam!
Hi, with DM920UHD it does not recognize the TVSAT card in its internal reader.
Returns the following error: "Card Reader / dev / SCI0 - No or unknown card inserted ".
Does anyone have any solutions or a CCAM fix? Thanks.
Greetings.
I have the same problem with all CCcam arm version.
Another question how can we mount a network connection, i don't find a menu to do that. For exemple to see a film on a nas network hard disk?
I find the answer one of my questions:
Menu > Setup > System > Expert settings > Network > LAN (or WLAN) > MountManager
In this image in telnet there isn't the command ps in the shell, i see we must use the jobs command, but there is no result, the list of the process don't come?
Another question how can we mount a network connection, i don't find a menu to do that. For exemple to see a film on a nas network hard disk?
Thank you.
On my DM 920 UHD, in the oscam.server, if i give an alias (my.server.com for exemple) there isn't connexion, i need to give the digital adress (186.234.1.9 for exemple) . Have you an idea of the problem?
It might have stopped dns
Thank you but i'dont know to run back dns in this image. I go back to openpli 8.3 image, no problem with the alias to connect to an oscam server.
On my DM 920 UHD, in the oscam.server, if i give an alias (my.server.com for exemple) there isn't connexion, i need to give the digital adress (186.234.1.9 for exemple) . Have you an idea of the problem?
and what is the topic of openpli 3 python? when you start separating the flies from the cutlets...go to the appropriate topic and look there
Thank you but I don't understand the answer because the two links are in this topic, one in the post #1 and the other in the post #21
Hello,
The new link doesn't work openpli-develop-dm920-20230112-Py3.tar only the old one is ok openPLi-8.3-dm920-20220926.tar.gz
Thank you to see for the new one, and thank you for your job!
I just instal the version 1.0.85 on a Vu+ zero (OpenBlackhole 5.1.012, Python 3.10.4) and works very good, thank you!
Select modules from CI and manage settings. Save the settings and insert the modules into the CI. Everything works as it should.
Ok thank you, i have no more this image because i could install multiboot, but next time i'll try how you tell!
Ok you have only one wire on your dreambox, this wire go in the wall, and after there is a central for the house.
The set up with the new tuner must be the same as the old:
Tuner A1:
connected, simple, Disecq A/B/C/D
and you choise what satellit is connected on A, on B, on C and on D. If you don't know you can choise automatic but sometime it doesn't find very good
Tuner A2:
not connected
Thank you for your help
But I have dreambox Dm900 with DREAMBOX DVB-S2X MULTISTREAM DUAL TUNER it is work fine there is only 2 tuners A1 and A2 and I just but simple with A/B/C/D and A2 not configure its work perfect but with this tuner it is not working even I have change the image same problem
And also I put the new tuner on Dm 900 not working
Then now you have two tuners like i showed the picture in your box, the old and the new one? Then 4 entries? On your picture you seem to have 4 entries now? Can you answer the abu baniaz's questions?
Ok you have 2 tuners like this:
Then you have 4 entries A1/A2/A3/A4.
If your installation is a disecq for 4 satelites vou have a good configuration, your dreambox doesn't work? If you never use Tuner A2 you cant setting as "not configured" but like this it's ok.
I don't know how are linked your 4 satellites, two antennes with double heads and disecq for two satellites, or 4 antennes? You can link too Tuner A1 direct to one satellite, tuner A2 direct to another satellite, and tuner A3 and tuner A4 direct to you last 2 satellites wihout disecq, its good to record a lot of things in the same time, but you need 4 cables.
I don't know why the post was written as resolve, it isn't, then i'm writting it as unresolve!
Like this must be good:
if you have a disecq with 4 satellites
Tuner A:
DVB-C: nothing (not connected, or red)
DVB-T: nothing (not connected, or red)
DVB-S: connected, simple, Disecq A/B/C/D
and you choise what satellit is connected on A, on B, on C and on D. If you don't know you can choise automatic but sometime it don't find very good
Tuner B:
DVB-C: nothing (not connected, or red)
DVB-T: nothing (not connected, or red)
DVB-S: nothing (not connected, or red)
or
Tuner A:
DVB-C: nothing (not connected, or red)
DVB-T: nothing (not connected, or red)
DVB-S: connected, simple, Disecq A/B
and you choise what satellite is connected on A, on B
Tuner B:
DVB-C: nothing (not connected, or red)
DVB-T: nothing (not connected, or red)
DVB-S: connected, simple, Disecq A/B/C/D
nothing connected on A and B and you choise what satellite is connected on C and D, not the same as Tuner B
With this solution you have more possibilly to record
If you have two disecq with two satellites:
Tuner A:
DVB-C: nothing (not connected, or red)
DVB-T: nothing (not connected, or red)
DVB-S: connected, simple, Disecq A/B, you choise the two satellites you have on A an B
Tuner B:
DVB-C: nothing (not connected, or red)
DVB-T: nothing (not connected, or red)
DVB-S: connected, simple, Disecq A/B
and you choise what satellite is connected on A and B, not the same as Tuner A
DM920 has an HDMI out and a HDMI in plug. Somebody knows how to use this last one? With the image Openpli_7.2 i find in the setting hotkey to set a button for hdmi in actived, but i have black screen.
With an official image i find nothing to use this hdmi in entrance? Somebody can work this fonction on what image?