Posts by SWEENEY

Just got a f5s brand new think it is original and I have loaded my n line on it in the Cccam part works clears the channels but keeps going offline.
it's not the n line works great in another box no problems have read the is a problem about this with the f5s boxes. Does anyone know of a way to sort this issue good little box cheap as chips too.

Quote from superkazza

But with the stats on amount of SD only subs still for *** I think this year may be pushing it

Well as they say "slowly slowly catch they monkey", it goes back to last year when I changed my mothers old white sly box because it rolled over and died. The women from sly said the will be no charge because they are changing all boxes to HD. And as I said they are changing all to HD to combat cs. Let's see what happens but as my source said " cs will be a thing of the past" hahaha heard that one before.

If you can't work out now what sly are doing let me tell you. All SD Channels will go soon aswell they are going HD only, that's why they are knocking one by one channels off " testing the water for cs to see what happens" also they only do HD boxes was told by a very good source sly will be HD only channels by the end of the year they where hoping for the end of last year.

Quote from SWEENEY

No m8 dish is out the back no traffic good idea cheers.

Really think the box is on its way out its donkey's old think I bought it back in 2005.

No m8 dish is out the back no traffic good idea cheers.

like what you are thinking will give it a go cheers.

Can't use usals on the 800 you have to add them manually turn usals to off.

Every night on bbc1,3 itv1234. Gold watch etc the +1 channels work ok it loses signal get a lot of ber. Using Gemini image on a 500 original box changed image and still the same. Have no trouble on the other dm box using same dish and lnb. Does anyone know way this happens or could it be a tuner problem. Cheers.

They are not the most important plugins most come standard with most images.

I had problems with talk talk for months with line going down all the time then changed to bt and when fitting the line said I had a problem and fixed it there and then yet talk talk never even looked.
I think everybody at sometime has had a bad experience with a ISP at some time or other.

Will try them cheers it's just that DCC takes for ever to transfer films over to the dm.

Can anyone point me in the right direction of a good FTP program to transfer films to my DM800 DCC and smartftp take for ever is the a faster program. Cheers.

No really don't think EPL use that channel now. Think it's Bein mena and INA.

newnigma2 OE2.0 works fine TS Media works great too.

800 with PLi-3.0 is this for clone box i have original box have you a link for this image please.

500s commando image,multi sat config fixed to a motorized 1.2 channel master. i have 3 boxes fixed to this dish and it happens to this box only.

this strange thing happens every night on bbc1 itv1,2,3,4 bbc3 bbc4 watch and a couple of others not the plus 1 channels.
every night about 9:30 to 12 some times longer the picture breaks up and lose signal any one else know the reason please.

Date: 2014-02-23 16:01
Enigma2: 3.999git20140219-r9.0.0
Distro: opendreambox 2.0.0
Machine: Dreambox dm800
/2.0/experimental
MD5: e77727664cf35b22bbbdfef6e3870053
SHA256: cccc97fc767144f1316cd7d415097a377617b2821e8256a993 d26180bb7bd3ea

Newnigma2 stable DM800 v4.0.9

DM 800 HD PVR: Newnigma2 v4.0.9

################################################## ###################
Newnigma2 team proudly presents:
Newnigma2 v4.0.9
################################################## ###################

Basics:

Enigma2 4.0: 19.02.2014
Enigma2 Plugins: 24.02.2014
Newnigma2 Plugins: 24.02.2014

DM 800 HD PVR

driver: 28.12.2013
secondstage: 84
kernel: 2.6.18

changelog E2 19.02.2014:

finally fixed baltic teletext subtitles
added usage config entry to switch back to old teletext subtitle charset selection
some small changes to improve list displaying with hd skins (thanks to zombi)

changelog E2 14.02.2014:

small mediaplayer position query fix
fixed memory leak on ts streaming from network sources
dont lookup other transponder SDT during service scan by default, add a (expert) config option to reenable it
(imho its needed for dish network scan only... but breaks service descriptions on some other satellites)
fixed possible crash on enigma2 shutdown/restart
teletext subtitles changes by Arvo Järve (thanks for that!)
add fallback handling to detect subtitle language for providers which not correctly implement the national option subset in the page header
(fixes subtiles on some baltic countries)
added cyrillic charsets
(e.g. fixes teletext subtitles on russian services)
new skin option: progress_pointer

changelog E2 18.11.2013:

fixed greenscreen on cancel press during service/marker/bouquet rename
fixed a possible crash caused by plugins which doesn't check the return code of startTimeQuery..
fixed possible crash on screen close
fixed broken "ImageDefaultInstaller" (broken since 20131112 update)
fixed possible ConfigLocations crash (typo)

Notice: Update from v4.0.x to 4.0.9 possible.

Changes:

Added: Skin Evolution-HD by Kerni (thx)
Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
Added: Kerni.Gnome-HD by Kerni (thx)
Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
Added: mediaportal
Added: swapmanager
Added: wget
Added: stat
Added: weathercomponent (needed for some skins)
Added: eventposition (needed for some skins)
Added: reftopiconname (needed for some skins)
Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
Added: Black-Box.HD.ME (32bit skin)
Added: cryptsetup more information
Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
Added: free space check's before installing or upgrade packages
Added: min free flash space is 3mb for installing/upgrading some packages
Added: improve network connectivity check in newnigma2 installer
Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
Bugfix: neutrino keymap
Bugfix: newnigma2.Kerni.PanTV-HD icons
Bugfix: Caid Renderer didn't close ecm.info and share.info properly
Bugfix: for loading wrong or no newnigma2 service menu png's
Bugfix: loosing picon value in servicelist after using configsaver
Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
Update: Some improvements on our onlineinstaller
Update: znc to version 1.2
Update: openvpn to version 2.3.2
Update: german translation
Update: mediaportal to version 5.1.X
Update: added weatherfunction only for newnigma2-HD inforbar
(blue button -> newnigma2 services -> osd function -> weather infobar -> on)
Update: picon renderer. create piconSList dir for servicelist picons.
Removed: we have removed non working plugins. most of them are integrated in mediaportal.
Removed: keymanger plugin from image. It's still available from our feed.
release changes from 4.0.0 to 4.0.7
here u can find USB to UART driver
here u can find DreamUP V1.3.3.11

Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

Important changes:

1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings

3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!

4. issue due upgrade to v4.0.9:
if you have troubles by upgrading to v4.0.9 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".

Wichtige Änderungen:

1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"

2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.

3. Installation oder Update des System:
Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
Sollte das nicht der Fall sein, bricht die Installation ab.
!!Achtung das enigma2 Paket benötigt min 9MB!!

4. Bei Problemen mit dem Update auf v4.0.9:
Sollte das Update auf v4.0.9 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
"blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.

could anyone tell me the best video format to transfer video too my dm800hd tried mpeg2 but the pixels blur every now and then i was wondering if the is any other format i could use cheers.