Posts by Kami3n147

Quote from Hannibal_Lecter

Connect with the Rescue Loaders

The Rescue Loader can be activated with different procedures

A DHCP server is required in the network

If you see the Enigma2 web interface, instead of the Rescue Loader, delete the browser cache ( e.g. with Ctrl+F5 )

Switch on Dreambox One using the power switch on the back.

When the LED lights up red, place your finger on the power button and hold it down.

The LED starts to pulsate in different colors, if it lights up solid red the box is in Resuce mode.

Trying several times if it doesn't work straight away is a bit tricky.

The display of the Dreambox or the TV now shows the address through which the Rescue Loader can be reached.

Enter the address in your web browser (e.g. Firefox), e.g.: http://dreamone

Display More

i have problem with bootloader on my dreambox one. When i turn on my dreambox the red light is blinking and my dreambox is not booting and i can't go to the rescue mode, i get no output from putty. Cable and drivers to serial port are ok, because i was testing it on my dreambox 900 and there it is working ok. So i found on this forum original bootloader for dreambox one i burned it on the sdcard and my dreambox started booting (also i get the bootlog from putty), i'm able to go into rescue mode and i can flash new image. I thought after flashing new image everything goes back to the normal but, when i flash new image my dreambox is only booting and working when i have sdcard inside, When i remove sdcard from dreambox and then restart it the blinking red light comes back and can't boot to the firmware. How can i flash bootloader to the dreambox so it can work without bootloader on sdcard?

i have problem with bootloader on my dreambox one. When i turn on my dreambox the red light is blinking and my dreambox is not booting and i can't go to the rescue mode, i get no output from putty. Cable and drivers to serial port are ok, because i was testing it on my dreambox 900 and there it is working ok.

Where can I find a similar rescue procedure for Dreambox One? Only the red LED is blinking, no recovery mode.

Quote from test1337x

Hello, so i guess i have problem with bootloader on my dreambox one. When i turn on my dreambox the red light is blinking and my dreambox is not booting and i can't go to the rescue mode, i get no output from putty. Cable and drivers to serial port are ok, because i was testing it on my dreambox 900 and there it is working ok. So i found on this forum original bootloader for dreambox one i burned it on the sdcard and my dreambox started booting (also i get the bootlog from putty), i'm able to go into rescue mode and i can flash new image. I thought after flashing new image everything goes back to the normal but, when i flash new image my dreambox is only booting and working when i have sdcard inside, When i remove sdcard from dreambox and then restart it the blinking red light comes back and can't boot to the firmware. How can i flash bootloader to the dreambox so it can work without bootloader on sdcard?

Have you solved the problem? I'm in the same situation :(

Please Build: r11732-799 Compiler: emu-arm-dreambox-ssl303-libusb-pcsc

Quote from samur

Kami3n147

Check the attached one, if still same error then i will take a look in it later .

Does this version support Sky UK ICAM?

Quote from samur

Kami3n147

Check the attached one, if still same error then i will take a look in it later .

It works, but every time I turn on the decoder I have to restart oscam. Otherwise there is a card error.

Quote from samur

Quote from Kami3n147

Unfortunately, the same error.

Your card is it working with internal card reader ?

;

Yes

Quote from samur

Kami3n147

;

Unfortunately, the same error.

2024/01/07 10:25:47 77795F8B r (reader) Freesat_via_USB [pcsc] classD0 insBC: failed

2024/01/07 10:25:47 77795F8B r (reader) Freesat_via_USB [pcsc] card system not supported

Quote from samur

Quote from Kami3n147

Hi, I am looking for the latest OSCAM with PCSCreader , SKY UK Icam and libsll303 for ARM

;

2024/01/07 00:06:31 2F60E6B2 r (reader) Freesat_via_USB [pcsc] PCSC was opened with handle: 42609644

2024/01/07 00:06:31 2F60E6B2 r (reader) Freesat_via_USB [pcsc] card detected

2024/01/07 00:06:31 2F60E6B2 r (reader) Freesat_via_USB [pcsc] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

2024/01/07 00:06:32 7DC89C71 r (-) -- Skipped 1 duplicated log lines --

2024/01/07 00:06:32 7DC89C71 r (reader) emulator [emu] found card system emu

2024/01/07 00:06:32 7DC89C71 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

2024/01/07 00:06:32 7DC89C71 r (emu) Key file not found in: /etc/tuxbox/config

2024/01/07 00:06:32 7DC89C71 r (emu) Key file not found in: /var/keys

2024/01/07 00:06:32 7DC89C71 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:0 T:0 A:0

2024/01/07 00:06:32 2F60E6B2 r (reader) Freesat_via_USB [pcsc] Card type: SYAV

2024/01/07 00:06:32 2F60E6B2 r (reader) Freesat_via_USB [pcsc] Rom version: 40LF

2024/01/07 00:06:32 2F60E6B2 r (reader) Freesat_via_USB [pcsc] Credit available on card: 35 euro

2024/01/07 00:06:33 2F60E6B2 r (reader) Freesat_via_USB [pcsc] FuseByte: 25

2024/01/07 00:06:33 2F60E6B2 r (reader) Freesat_via_USB [pcsc] Region Code: TW13

2024/01/07 00:06:33 2F60E6B2 r (reader) Freesat_via_USB [pcsc] Country Code: GBR

2024/01/07 00:06:34 7133B191 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2024/01/07 00:06:35 2F60E6B2 r (reader) Freesat_via_USB [pcsc] classD0 insBC: failed

2024/01/07 00:06:35 2F60E6B2 r (reader) Freesat_via_USB [pcsc] card system not supported

2024/01/07 00:06:35 2F60E6B2 r (reader) Freesat_via_USB [pcsc] Normal mode failed, reverting to Deprecated Mode

2024/01/07 00:06:35 2F60E6B2 r (reader) Freesat_via_USB [pcsc] Error activating card.

Dreambox DM900 + Egami 10.4 +PCSC on USB = card system not supported. in the external reader it works.

Any tips?

Hi, I am looking for the latest OSCAM with PCSCreader , SKY UK Icam and libsll303 for ARM

Hello, i have the white card as bellow. I cannot configure OSCAM. The above tips don't work. Please help.