Posts by jose luis y

Quote from master G

Quote from JOSE LUIS Y

Does anyone know what happens with this plugin?

Quote from d4niel

Support for the plugin has been discontinued. The developer doesn't have time at the moment.

Hopefully the developer has time in the future.

I have NordVPN and use this plugin a lot

Hopefully it can be updated for OpenATV 7.0

Best regards

Hello

Does anyone know what happens with this plugin?

Can't download (except ipk files)

Thanks

Hello

Please can you make OpenATV 7.0 for Vu+ Duo 4K SE, light and dark

Open PLI 8.3 Mutant HD 66 SE

Thanks

Hello

What advantage does the OSCam 11712 have over the 11711 (for me as I am totally inexperienced)?

Thanks

Hello

Thank you very much for your image, which i am using for Vu+ Duo 4k SE

Where is EPG import located?

Thanks

Article

PurE2 General Setup

PurE2 will be supported by yours truly, the only (or at least the first) person on Earth who previously wrote a comprehensive tutorial for Enigma2, CamD's, CS, streaming, playback and all the worts..

gorski

Jan 6th 2019

Quote from a.senna

Quote from JOSE LUIS Y

Quote from a.senna

After testing a lot the problem still remain.

Let's see if looking at my configuration we can clarify something.

The MIS satellite I see is Eutelsat 5ºW

Down 2 cables of 4 twin LNBs, with Diseqc

like tuner A, it is not for MIS reception, it necessarily goes to tuner I (I have the preferred tuner on automatic)

Simple setup, Diseqc A/B/C/D.

5ºW is in position C, but only in Tuner I, in Tuner A position C, it is as not configured

Hope this can help you

However, I seem to remember that I ended up returning the Tuner I and J. Because it continuously pixelated. They sent me a new one, with which there were no pixelations.

Although I sold the receiver later (with the new optional tuner)

Display More

I have 2 antennas and one diseqc switch

Antenna A fixed position

Antenna B motor

one cable comes from diseqc switch to my receiver, in this case tuner I, but tuner I is pixelating some channels. Not MIS channels. Mis are ok .

If I disconect tuner I and connect the antenna cable to tuner A pixelization disappears, all ok except with tuner A, I will not receive MIS channels obviously.

Why tuner "I" cannot display some "normal channels" correctly?

Do you have 14W satellite? IF yes you will notice some T2-MI channels dont show up with tuner I, but with Gigablue trio 4k they work fine.

Thanks a lot for your help

Display More

Look at these Spanish websites.

Especially OpenSpa in great. Section antennas and motors.

Configuracion Tuner DVB-S2X junto a tuner FBC Gigablue Quad 4K con lnb Unicable

Os traemos en esta ocasion como realizar la configuracion del Tuner Opcional DVB-S2X junto al doble tuner FBC oficial de fabrica en Gigablue Quad 4K. Para ello…

boxtvmania.blog

you can also put a signal distributor, with DC pass, if you can only download 1 cable from the antennas

Quote from a.senna

Quote from JOSE LUIS Y

Quote from a.senna

After testing a lot the problem still remain.

Let's see if looking at my configuration we can clarify something.

The MIS satellite I see is Eutelsat 5ºW

Down 2 cables of 4 twin LNBs, with Diseqc

like tuner A, it is not for MIS reception, it necessarily goes to tuner I (I have the preferred tuner on automatic)

Simple setup, Diseqc A/B/C/D.

5ºW is in position C, but only in Tuner I, in Tuner A position C, it is as not configured

Hope this can help you

However, I seem to remember that I ended up returning the Tuner I and J. Because it continuously pixelated. They sent me a new one, with which there were no pixelations.

Although I sold the receiver later (with the new optional tuner)

Display More

I have 2 antennas and one diseqc switch

Antenna A fixed position

Antenna B motor

one cable comes from diseqc switch to my receiver, in this case tuner I, but tuner I is pixelating some channels. Not MIS channels. Mis are ok .

If I disconect tuner I and connect the antenna cable to tuner A pixelization disappears, all ok except with tuner A, I will not receive MIS channels obviously.

Why tuner "I" cannot display some "normal channels" correctly?

Do you have 14W satellite? IF yes you will notice some T2-MI channels dont show up with tuner I, but with Gigablue trio 4k they work fine.

Thanks a lot for your help

Display More

I am not an expert, but it seems to me that you need another drop cable (without diseqc or with diseqc with twin LNB)

I don't get 14W.

I have only tested T2MI channels at 5W (when there was one).

Only Octagon SF8008 had compatible software

Not Vu+ Duo 4K SE, Dreambox Two, Gigablue Quad 4K, etc.

I did not know that Giga Trio 4K had that software

Best regards

Quote from a.senna

After testing a lot the problem still remain.

Let's see if looking at my configuration we can clarify something.

The MIS satellite I see is Eutelsat 5ºW

Down 2 cables of 4 twin LNBs, with Diseqc

like tuner A, it is not for MIS reception, it necessarily goes to tuner I (I have the preferred tuner on automatic)

Simple setup, Diseqc A/B/C/D.

5ºW is in position C, but only in Tuner I, in Tuner A position C, it is as not configured

Hope this can help you

However, I seem to remember that I ended up returning the Tuner I and J. Because it continuously pixelated. They sent me a new one, with which there were no pixelations.

Although I sold the receiver later (with the new optional tuner)

Hello

Could you please inform OpenATV's position, if it has one, regarding the issue

Captain  giopet  Apachi70

Thanks

Quote from Melgas

Hello jose luis y.

I also turned off HDMI-CEC.

I will wait for an update.

This plugin is practical.

Hug.

I have put a post on the NN2 forum, but they are a bit "strange"

We will wait for an update

Hug for you

Quote from Melgas

Hello,
Hello,

DM920UHD-4K

OpenATV 7.1

I'm having problems with HDMI-CEC.

I had to reinstall the Image today, because I made changes to the HDMI-CEC configuration and the Box didn't start anymore.

1) I need to turn off the Box and at the same time turn off the SAMSUNG TV.

2) I need to restart the Box, but it shuts down. But does not restart.

I need help, to configure.

Thanks.

Display More

Similar happens to me.

I have a Dreambox Two with NN2, and I had to turn CEC off

In on it takes a long time to start up, to close the decoder and also does not disconnect the tv

Quote from a.senna

Quote from Offtensive

What is your signal quality?

With this tuner I have :

Focus HD on 13e SNR 82% and AGC 80%

Love nature on 39e I have SNR 90% and AGC 64%

Strange thing is with the FCB tuner I have no problems watching all channels except Multistream ones, and signal is higher than with this DVB-S2X TS2L08 single tuner on both UE 4k.

Display More

Describe your installation a bit:

How many antennas do you have?

Do you use Diseqc?

How many cables come down from the antenna?

Engine?

Forgive my ignorance, but on which satellite are the MIS you are interested in?

Quote from a.senna

Quote from JOSE LUIS Y

Quote from a.senna

Im having some problems also with my tuner, i´m using tunner I only, and some channels have problems.

For example if I zap channels on 39E and go to Love nature channel picture start to pixelate.

On 13E same thing happens on Focus channel 11432V.

It happens on openatv 6.4 and 7.1, and with teamblue 6.4 also.

I bought 2 tuners last week same thing on both UE and on both tuners, its impossible they are faulty!

Its not only that channels, they all start to pixelate.

Display More

If you only use the optional Tuner I and J, put in "settings" in the preferred tuner the "I", instead of in automatic.

Try and tell me

Display More

I only have tuner I active, tuner A its not in automatic, its "Not configured" actually. I think its the same as disabled...

Where is that option to set preferred tuner?

Display More

It's not in satellite configuration.

I enter with the PC in OpenWebif.

You go to configuration on the left, and click on configure in the menu that comes out

There comes the "preferred tuner", you remove automatic and put "I"

Quote from a.senna

Im having some problems also with my tuner, i´m using tunner I only, and some channels have problems.

For example if I zap channels on 39E and go to Love nature channel picture start to pixelate.

On 13E same thing happens on Focus channel 11432V.

It happens on openatv 6.4 and 7.1, and with teamblue 6.4 also.

I bought 2 tuners last week same thing on both UE and on both tuners, its impossible they are faulty!

Its not only that channels, they all start to pixelate.

Display More

If you only use the optional Tuner I and J, put in "settings" in the preferred tuner the "I", instead of in automatic.

Try and tell me

Quote from a.senna

¿El quad 4k tiene el mismo problema?

Muchas gracias

No es un problema.

Es que Tuner A es DVB-S2X, pero no es MIS

En el Quad pasa lo mismo

Display More

New transponder 11138 V on Sat 5W

Telenorba

1_0_1_4A_8800_217C_DDE0000_0_0_0

Teledue

1_0_1_4B_8800_217C_DDE0000_0_0_0

Antenna Sud

1_0_1_4C_8800_217C_DDE0000_0_0_0

TG Norba 24

1_0_1_4D_8800_217C_DDE0000_0_0_0

Thanks for your picons

Hello

Quote from a.senna

Quote from JOSE LUIS Y

I have bought the Gigablue UHD UE 4K, with the dual DVB-S2X Tuner (tuner I and J) as an option.

I have 4 twin LNBs that go down 2 wires to the receivers (by diseqc).

When I connect a cable to Tuner A, simple configuration, and Tuner B looped to A, with I and J not configured, everything goes well. Logically I do not receive the MIS channels in 5ºW.

When I connect a cable to Tuner I or J, with Tuner A not configured, they pixelate all the channels after a few minutes.

The same happens if instead of 1 cable I connect the 2 that go down, to Tuner A and I. After a few minutes all channels are pixelated.

Could it be that this optional Tuner has a fault?

Any suggestion?

Thanks

Display More

Did you solve the pixelating issue?

Display More

The truth is that I sold it shortly after and bought a Gigablue Quad 4K

The important thing is that Tuner A is DVB-S2X, but it is not MIS.

By having the 2 cables that come down from the dish with Diseqc, if you want to see the MIS, you must set this satellite as "not configured" in Tuner A

So the tuner J and I are the ones that work in 5ºW

Best regards

Quote from dr-sat

Quote from JOSE LUIS Y

Quote from dr-sat

Quote from JOSE LUIS Y

Hello

I have a Dreambox Two with NN2

I can't install the .deb file

If I do it from the decoder, the green screen appears

Thanks

Display More

Hi, I wish you could take a picture of the green screen! But two questions; How do you install the skin and did you install the weather plugins?

Display More

I installed the skin both by ftp and from the main menu.

Could not install in both cases...as in #5

Display More

What image are you installing on? This skin has been tested on cvs.

Display More

the image is Newnigma2

Thanks

Quote from dr-sat

Quote from JOSE LUIS Y

Hello

I have a Dreambox Two with NN2

I can't install the .deb file

If I do it from the decoder, the green screen appears

Thanks

Display More

Hi, I wish you could take a picture of the green screen! But two questions; How do you install the skin and did you install the weather plugins?

Display More

I installed the skin both by ftp and from the main menu.

Could not install in both cases...as in #5

Hello

I have a Dreambox Two with NN2

I can't install the .deb file

If I do it from the decoder, the green screen appears

Thanks