Posts by trismi2001

Quote from piterfree

reverse the 2 Caids

ident = 183D:000000,005411;183E:000000,005411

ident = 183E:000000,005411;183D:000000,005411

then you use the 183D you still have the card....if you have the Gold I'll put him to do that Caid...????

Display More

Tried reversing as you proposed but nothing I tried both with the blue card (the first card issued) and then with the gold card. I don't understand why it doesn't work. In the oscam.conf, oscam.user, oscam.dvbapi is there nothing to review? These files are the ones you gave me.

Thanks.

trismi2001

Quote from piterfree

Screenshot_20240401-190735~2.png

I solved the connection. The problem was the bin I put back the original one ( OSCam_11718-r798) removing the one from Samur and everything worked like your screenshot. Now I will try to see for TVSat.

reader]

label = SRG/SSR

enable = 1

protocol = internal

device = /dev/sci0

caid = 0500

provid = 060200,060210,060220,070200,070210,FFF430

srvid = 36E3,36B3,03B7,36B9,4333,36B2,4334,36B8,4331,0385,4332,038B,038F,4335

detect = CD

viaces_read = 0

mhz = 375

cardmhz = 2700

ident = 060200,060210,060220,070200,070210

au = SRG/SSR

group = 1

emmcache = 1,3,2

services = my_services

[reader]

Label = tivurat

detect = CD

Protocol = internal

Device = /dev/sci1

ident = 183D:000000,005411;183E:000000,005411

cardmhz = 368

mhz = 357

#Fallback = 0

Group = 1

caid = 183E,183D

auprovid = 005411

nagra_read. = 2

emmcache = 1,3,2,0

tiger_rsakey = A9........B5

TvSat does not work with this setup. Suggestions?

trismi2001

Quote from piterfree

Quote from piterfree

ok...oscam.conf...maine

+++++++++++++++++++++++++

[global]

logfile = /tmp/oscam.smargo.log

clienttimeout = 12000

fallbacktimeout = 3000

bindwait = 35

initial_debuglevel = 64

netprio = 1

nice = -1

maxlogsize = 1024

waitforcards = 0

waitforcards_extra_delay = 200

preferlocalcards = 2

readerrestartseconds = 1

dropdups = 1

reload_readers = 1

reload_provid = 1

reload_services_ids = 1

reload_tier_ids = 1

reload_log = 1

block_same_ip = 0

block_same_name = 0

lb_nbest_readers = 4

lb_nfb_readers = 4

ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j

needsemmfirst = 1

disablecrccws = 1

[cache]

[radegast]

port = 9090

allowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,255.255.255.255

user = dvbapiau

[streamrelay]

stream_relay_enabled = 1

stream_ecm_delay = 5

stream_relay_ctab = 098D

[dvbapi]

enabled = 1

au = 1

pmt_mode = 0

request_mode = 1

delayer = 60

user = dvbapiau

read_sdt = 1

write_sdt_prov = 1

[webif]

httpport = 8888

httpuser = root

httptpl = /etc/tuxbox/config/

httppiconpath = /media/ba/picon

httprefresh = 23

httpshowpicons = 1

httpshowmeminfo = 1

httpshowuserinfo = 1

httpshowcacheexinfo = 1

httpshowecminfo = 1

httpshowloadinfo = 1

httpallowed = 172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1

http_status_log = 1

Display More

[webif]

httpport = 8888

httpuser = root

Display More

I have tried several times with http://192.168.178.X:8888. (Computer Ip:8888) Connection failed. Not even with 8080 I can only connect with Webif.

Quote from piterfree

oscam.services

+++++++++++++++++++++++++

[SRGSSRSRF0500-Hotbird13.0E-VIACCESS]

caid=0500

provid=050800,050810,060200,060210,070200,

disablecrccws_only_for_exception=1

srvid=36E3,36E4,36E5,36E6,4331,4332,4333,4334,4335,4336,4337,4338,1F43,1260

Screenshot_20240401-141008~2.png

I have v.7 and v.6 works too

Display More

Great. RSI is finally working. TVsat doesn't go with Oscam but it works with CCCam 2.3.9. I will try to see if I can get it to work. I cannot connect with Oscam as per your screenshot. If you still give me these two directions to complete the work I would be very grateful. Of course if you want because even then I am already happy. Again thanks for the support you have given me.

Quote from piterfree

if I understand correctly that decoder has 2 readers...???...if so you will have to try changing only...

device = /dev/sci0...instead of 0...put 1..or turn the card.

the Vu+ Ultimo 4K has two readers and I also have two TVSat and RSI cards. Yesterday I tried again for the umpteenth time.

1. I uninstalled the Oscam I had on board.

2. I installed an Oscam ipk that I had then I replaced the bin with the one from Samur that you told me (h9 Arm)the ipk is not found also the bin I found only one and I gave permissions 755

3. Loaded your Oscam.server with RSI and TVsat (mine).

4. placed on La1 it worked for a few seconds then I switched to La2 and the darkness reappeared and I could no longer see anything on La1 either. Nothing. Darkness as before.

5. verse of card and slot checked several times.

I don't understand why.

I thank you for your patience.

trismi2001

Quote from piterfree

[reader]

label = SRG/SSR

enable = 1

protocol = internal

device = /dev/sci0

caid = 0500

provid = 060200,060210,060220,070200,070210,FFF430

srvid = 36E3,36B3,03B7,36B9,4333,36B2,4334,36B8,4331,0385,4332,038B,038F,4335

detect = CD

viaces_read = 0

mhz = 375

cardmhz = 2700

ident = 060200,060210,060220,070200,070210

au = SRG/SSR

group = 1

emmcache = 1,3,2

services = my_services

I have the v.6-v.7 cards and with these configurations... it works.

Display More

No go no progress. Darkness. Suggestions?

trismi2001

Quote from piterfree

[reader]

label = SRG/SSR

enable = 1

protocol = internal

device = /dev/sci0

caid = 0500

provid = 060200,060210,060220,070200,070210,FFF430

srvid = 36E3,36B3,03B7,36B9,4333,36B2,4334,36B8,4331,0385,4332,038B,038F,4335

detect = CD

viaces_read = 0

mhz = 375

cardmhz = 2700

ident = 060200,060210,060220,070200,070210

au = SRG/SSR

group = 1

emmcache = 1,3,2

services = my_services

I have the v.6-v.7 cards and with these configurations... it works.

Display More

I uploaded your posted conf evidently it will be the other conf that are wrong . user,.conf, .dvdapi, etc.

The bin I loaded isp OSCam-11748-800 (arm sf4008_h8.2h_h9.2h libusb).zip

trismi2001

Quote from piterfree

(mipsel libusb).....no

non va devi prendere quella per H9 e Arm riprova,

quella che ai messo non partira' di certo.

(mipsel libusb).....no

it doesn't work, you have to take the one for H9 and Arm, try again,

the one you put in will certainly not leave.

Display More

I tried the bin you suggested. Nothing. One question in the Oscam.server you have to put the RSA Key of the Swiss ? I did not put it. Is that where the problem is?

trismi2001

Quote from piterfree

ciao,

sto usando la Oscam di Samur per TvSat e funziona lo stesso perfettamente avendo 2 Card estraggo una riavvio la Oscam e metto l'altra e non ho nessun problema

[reader]

label = SRG/SSR

enable = 1

protocol = internal

device = /dev/sci0

caid = 0500

provid = 060200,060210,060220,070200,070210,FFF430

srvid = 36E3,36B3,03B7,36B9,4333,36B2,4334,36B8,4331,0385,4332,038B,038F,4335

detect = CD

viaces_read = 0

mhz = 375

cardmhz = 2700

ident = 060200,060210,060220,070200,070210

au = SRG/SSR

group = 1

emmcache = 1,3,2

services = my_services

Display More

Ciao,

ho scaricato l'Oscam di Samur OSCam-11750-800 (mipsel libusb) Ma non sono sicuro che vada bene per il mio Vu+Ultimo 4K e poi ho caricato la tua oscam.server ma non ho visto la luce. Sbaglio sicuramente qualcosa ma non so dove.

trismi2001

HI,

I downloaded Samur's Oscam OSCam-11750-800 (mipsel libusb) But I'm not sure if it's good for my Vu+Ultimo 4K and then I loaded your oscam.server but I didn't see the light. I'm definitely doing something wrong but I don't know where.

trismi2001

Quote from piterfree

ciao,

sto usando la Oscam di Samur per TvSat e funziona lo stesso perfettamente avendo 2 Card estraggo una riavvio la Oscam e metto l'altra e non ho nessun problema

[reader]

label = SRG/SSR

enable = 1

protocol = internal

device = /dev/sci0

caid = 0500

provid = 060200,060210,060220,070200,070210,FFF430

srvid = 36E3,36B3,03B7,36B9,4333,36B2,4334,36B8,4331,0385,4332,038B,038F,4335

detect = CD

viaces_read = 0

mhz = 375

cardmhz = 2700

ident = 060200,060210,060220,070200,070210

au = SRG/SSR

group = 1

emmcache = 1,3,2

services = my_services

Display More

Grazie per la cortesia. Proverò e poi farò sapere.

trismi2001

Thanks for your courtesy. I'll try it and then let you know.

trismi2001

Quote from piterfree

esatto,

ma ce' una cosa importante per la Oscam deve esser un bin nuovo se ai la V.7

io ho le 2 versioni 6 e 7 fatto i test perfetti

una delle ultime Oscam e con pochissimi parametri ed i dvbapi che ho postato sopra e va che una meraviglia...e speriamo che non cambino.

Scusa se ti chiedo ancora aiuto ma mi potresti postare, in privato se non si può sul forum, la tua configurazione aggiornante. Indicami, per cortesia, anche la versione di Oacam così la posso scaricare. La mia card è l'ultima versine v.7. Grazie per la tua disponibilita.

Sorry if I ask you for help again but could you post to me, privately if it's not possible on the forum, your updating configuration. Please also tell me the Oacam version so I can download it. My card is the latest version v.7. Thanks for your time.

Quote from piterfree

hello, put on the MgCam so that you no longer have any problems, see how the TSI is doing very well.

IMG_20240116_235535~3.jpgIMG_20240116_235630~2.jpgIMG_20240116_235659~2.jpg

Ciao, ha un problema con la lettura della card RSI ufficiale. Ho un Vu + Ultimo 4K con Blackhole. Tu dici di usare la MGcamd ma quale? Mi potresti dare qualche dritta? Ti ringrazio anticipatamente. trismi2001