Posts by dreamuser

if i was u i would dwnload all the configs again and dnt change anything, you have # out some info that might b wrong but we cant see it, like this httpallowed = 192.168.###.### - 255.255.255.255, u have a 192.168 ip and in ur n line u have a 127.0.0 ip, if u have oscam and cccam in same box u dnt need a 192 ip make them the same..
[newcamd]
port = 15500@0963:000000

httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
N: 127.0.0.1 15500 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 25
make sure the ports are the same and the ip

ok found this we trick out and seems to work for me to get my ECMS down,so thought i would share it, it always works on sly sports1 and sometimes on the others, in ur all services on dm500/800 their is 5 s sports1, select a different region and it will drop ur ecmtimes back to normal, in the srvid.cfg its this channel that works best for me and all my clients 0963:1203|
dreamuser

i tryed the above, it wont install either, i tryed to install winxp and the same thing happens, it says somefing like, inspecting your computer, then goes blank and the computer starts to make a wierd noise, so the only thing that seems to work is clearos and i having a clue how to use it lol, i have never seen this fault before
dreamuser

i read on the debian website that as little as 32mb of ram does if its the basic install, i dnt want to buy more ram and theirs something wrong with the pc, has any1 installed debian 6 in a pc using 256 ram.
dreamuser

first HAPPY NEWYEAR TO YOU ALL..

my friend give me a computer it says on it intel celeron and i thing it has 256 of ram, i have debian 6.0.5 that i installed with no problems in my other pc, but every time i try to install it into this it just freeze. it loads up the install screen and i click install it looks like its going to do it, the screen goes blank then it goes back to the install screen but this time its jumping or flickering, i tryed to install clearos and it worked np, but no sure how to use that, so want to install the same os that i use on my other pc, is it the wrong version, im not sure if the 1 i have is 32 or 64 bit, what is the best one to use in thei machine, just incase u need to no, i want to install oscam/cccam on it..
dreamuser

ok thanks it is right then, il give it atry again, its just wired why the c line wont share, it must be because oscam reads the card and theirs a Nline in the cccam.cfg, il see how oscams.
thanks for the replys

Ok i have tryed it every way but it wont let me reshare, ok in my pc server i have oscam and cccam, in the cccam.cfg i have this N line and it works and all my clients work.
N: 127.0.0.1 15500 card1 card1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
but i want to add a cline so i can share that line with my clients to, so i would have this below in my cfg

N: 127.0.0.1 15500 card1 card1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
c:192.168.1.9 17544 test1 test1
then all my F lines below, but the cline isnt sharing, if i goto the pc server 192.168*.*:16001 page and click on share it has
the 2 lines in their and they both have uphops and if i i click on server, both lines are in their and both have card 1 in their lines, so the server is seeing the line ok, it just wont share it can u share a NLINE and CLINE in same cfg, i no when i used cccam only as reader it worked because i give a friend a share line and he reshared with is m8s, like i said i made a Nline from the dm800 and put that into my pc server and it worked but the setup mush have been wrong because it ketp cutin off.
ok if i had oscam only in my dm800 and i wanted to give my pc server a N line how would it look, my dm800 ip is 192.168.1.9 and the pc server is 192.168.1.5, they are on same router, would it be like so.
N: 192.168.1.9 15500 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

thanks for the replys, i want to share my cline with the cccam cfg not the oscam reader, ok i tryed to start again, im using a dm800 as a server, it has oscam/ccam and 1 card in it, i have a dm500 so put cccam 2.13 in it and give it a cline from the dm800 c:192.168.1.9 17544 test1 test1, the dm800 f line like so F: test1 test1 3 0 1 { 0:0:3 } i even try removing the 3.0.0 still nojoy, so in the dm500 i put a Fline to share with another box 500 but wont share, the first 500 that the dm800 is sharing with works ok,i dnt no wat im doing wrong, is their a different protocol or something or is it cause im using oscam as reader and habe a Nline in cccam, do i need to do anything to the N line..

ok i just tryed this and it worked, but keep cutting off ever 20min of so n had to restart box, i put a N line in the 500 box, so made a second user in oscam and put that user n password into a Nline, the only thing i changed was the port and added httpdyndns = 192.168.1.9 but dnt even no if i have to, here is my oscam cfg i edit

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpdyndns = 192.168.1.9
# protocols

[newcamd]
key = 0102030405060708091011121314
port = 19566@0963:000000;10001@0963:000000.... put my port at start

[account]
user = test1
description = for local mgcamd or DVBAPI
pwd = test1
disabled = 0
uniq = 1
group = 1
au = lower card
caid = 0963:000000

[account]
user = test2
description = for local mgcamd or DVBAPI
pwd = test2
disabled = 0
uniq = 1
group = 1
au = lower card
caid = 0963:000000

i seen this in peoples oscam config dnt no if i need it.

[cccam]
port = 12000
nodeid = 71A3E54910C4154A
version = 2.0.11
so if i just forget about cccam and use oscam and make a N line, the boxs i want to share with are in my home and on same router

it is, i can share it to different boxes, i just cant share to my server..

hi i have oscam and cccam installed, i want so share a cline with my clients in cccam.cfg but it not working, do i need to add somefing to the cfg, here is my cccma cfg
SERVER LISTEN PORT : 19566

ALLOW WEBINFO: yes
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox

NEWCAMD CONF : yes
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
#MINIMUM DOWNHOPS: 1
#protocol : internal
#device : /dev/sci0
#BOXKEY: /dev/sci0
N: 127.0.0.1 15500 card1 card1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
C: 192.168.1.9 17544 test1 test1
i allowed shares from 192.168.1.9 server box to the cline but doesnt clear the channels from that server card, can u share cline using oscam/cccam
thanks

ok it happened again, about 6 clients droped out and i couldnt log to the 16001 page using my fone, wen i tryed to ping it using command prompt didnt give me my ip, it give me this one reply from 192.168.1.0 bytes=32, i did try to change my router, to a d-link but had even more problems and couldnt get my own boxes to work, i check for a firewall but cudnt see any, do it look like the router is the problem, and when i went to show status in netgear router it said service provider unreachable.
dreamuser

u said about dns software, that must be in the router, yes, i mean i have a different netgear i will try that on next time

ok and thats in the router, next time it stops il put a different router in, and wont reboot anything, so if it comes on again, them it deff the router, but why does only some clients go off

yes i try it in command prompt and it give my ip address, it says sent4 packet and received 4, every thimng is workin at the min but next time it stops i will try this, so if it doesnt give my ip, wat would be wrong
dreamuser

never tryed, how shud i ping it, and that bk is of a old card.

i dnt think its the configs, maybe somefing wrong wiv the oscam or ccam or the pc its self.
[reader]
label = slyuk
protocol = pcsc
device = 0
caid = 0963
detect = cd
mhz = 368
cardmhz = 368
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
lb_weight = 101

[global]
#logfile = /var/local/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 0
saveinithistory = 1
debug = 255

[newcamd]
port = 15500@0963:000000
key = 0102030405060708091011121314
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
keepalive = 1

[webif]
httpport = 15000
httpuser = user
httppwd = password
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[account]
user = card1
pwd = card1
uniq = 2
monlevel = 1
caid = 0963
ident = 0963:000000
group = 1
#au = 0
blockemm-unknown = 1

SERVER LISTEN PORT : *****

ALLOW WEBINFO: yes
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox
ZAP OSD TIME : 3
OSD USERNAME : root
OSD PASSWORD : dreambox
OSD PORT : 80
#SHOW TIMING : yes
#MINI OSD : yes
DEBUG : yes
NEWCAMD CONF : yes
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
#MINIMUM DOWNHOPS: 1
DISABLE EMM : yes
EXTRA EMM LEVEL : no
#protocol : internal
#device : /dev/sci0
#BOXKEY: /dev/sci0
N: 127.0.0.1 15500 card1 card1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
one thing i have tryed to do but would let me, is to add a second user, when i make a second user it doesnt show up in the [webif] in oscam

[account]
user = test
pwd = test
uniq = 2
monlevel = 1
caid = 0963
ident = 0963:000000
group = 2
#au = 0
blockemm-unknown = 1

their is no dns settings in the hub, their in my netgear, i dnt mess with them just check the staus when clients not connecting, but lots of times it says their no problem but clients still cant connect, i dnt get how some connect and some dnt, i even set my dm800 box local 192.168.1.6 and it still sometimes doent connect, ats what mkes me think its oscam problem, some times even if i dnt reboot internet and i just reboot server it fixes problem, its doing my head in, its happening twice a week now or some times more

not sure if this is to do with oscam or my new super hub virgin give me, for some reason some of my clients cant connect to my server, one min everfing is working fine, then it will show maybe 5 7 clients have droped out including my own box, and some times if i login to my netgear router and goto dns staus it says.. Update failed at 04:59 PM, 12/22/2012. The service provider is not reachable. if i keep rebooting server and restarting internet it comes back on, but that can take up to ahour of rebooting, when it happens i cant conect using my fone eather, dyndns.org:16001 will it be to do with virgins new super hub and the new 30mb connect they put me on, it seems to happen more at weekends anyone have this problem
thanks

u can download oscam from the plugin menu, u might need to try a few before u get one to show in ur softcam manager, but dnt think it needs to anyway

i use this one, i have had problems with other versions, this works best for me, maybe it work for you, just make sure u uninstall the one you have on it now, then reboot and install this one.