Hello my friend Jenseneverest, have you tested the image in question, because I see that you have to register on a forum to download it....
Posts by kashmir
-
-
Hello my friend Jenseneverest, have you tested the image in question, because I see that you have to register on a forum to download it....
-
Look at the photos that I am posting to you, you have to open your disecq by pulling on it, if necessary with a pin and you put the 2 positions as in the photos, 1 on and 2 on off.....
-
Hello
Something strange is happening to me...!
I have a 7 lnb system, (13°,16°,19°) but so far I have only ever used 3!
Today being at home I tried to arrange the other satellites, adding 26°, 28°, 9°.
If I set the advanced configuration I have no signal in any satellite.! If instead I set it simple, I have the signal in all 3 satellites.
But even if I add a simple setting with 4 satellites I still have no signal...!Hello everyone, show us which disecq you use and how it is configured, if for example it is a centaury, when you open the case, there are adjustment buttons......
See in the drawing on the right, top side of the switch....
-
Hi everyone, to find the various sats, you must already have your mast right on 2 planes....and then you put yourself on a powerful frequency on the screen and be sure to be received in your place of residence .....and you search by slowly moving your Lnb....and if nothing is in front and if your mast is very well adjusted, it must work....Don't hesitate to put good Lnb type Inverto Black Ultra for more difficult sats.....
-
Hi everyone, I don't really understand why we went with a T90 title, so toroidal dishes with double reflectors, while in the photos we see a multi+head Bigsat type dish???????
-
already tried, all these things don't work, plus if you want Octagon to change it for you you have to send it without opening it or tinkering with it, otherwise it's dead..
-
Hi friend, contact octagon directly, they will change your remote control, they know very well that their remote controls are crap, but they do nothing, it's a problem that has been reported to them for a long time...
-
Regarding the connection with a disecq century 8 inputs for example, that's what I use and I even added a little extra that I'm going to show you....
So I have 7 positions with my T55 dish, I of course do not receive all the frequencies of 28.5 for example or Thor, but I have 5 degrees west, 0.8 west partially, 9° east, 13° east, 19° east, 23 and 28.5 east....and on the last entry, I have a small motorized dish which works perfectly well, I know that for the pros, it will make them laugh, but as I I like tinkering, I tried and I put 2 images of the classic sats connections from 2 to 8 for the inputs, corresponding of course to the disecq inputs and input 1 for the motorized one....
Disecq mode 1 for the 7 fixed ones and their predestined numbers in disecq command and disecq mode 1.2 for the motorized and command 1 for the entry and it rolls.....
-
In fact the center satellite is important only in the sense of your choice of global reception satellites....
If we estimate that with your dish you can receive more or less 40 degrees of reception....if you want Hispasat at 30 degrees west, it will not be the same as if you want Turksat at 42 degrees east.....
Assuming that you start from Thor at 0.8 degrees west, you can go east to 19 degrees and the same amount to the west.....based on the total 40 degrees.....
-
Ah yes I`m in Ireland 40km from Dublin - Maynooth
kashmir Merci beaucoup ! I will study the discussion you provided - pictures there very professional - I have that diseqc centauri .
tfrc you right Turksat is like 28e in Ireland plenty of tv! In Ireland only west beam is possible so few transponders - but still why not...
Thank You for advice !
On the other hand, the 39 is very easy to receive....
See you....
-
For my part I am towards Marseille in France....
Before in Haute-Savoie, Mont Blanc, but the dish is still so low on the horizon, it comes from the principle of double reflectors....
Here, very nice discussion....
-
Personally, I don't have a T90, but a T55, it's the same system but smaller.....Did you go for a connection with disceq 8 or 16 outputs?????Initially, for your basic satellite, put a single lnb and a single cable live, and parable very little raised on the horizon, almost straight.....
look how little the parable is with Hot bird in the center for me too.....
-
Is it clear in front of your parable,
you should know that the toroidals are set much lower than the classic parabolas....Then for the start, you take the sat that you want to put in the middle of your reception, with a T90, you can count on 40 degrees of reception in total, so if you put hot bird in the middle, you will go 5 west to 39 or 42 degrees east.....
-
Hello my friend,
congratulations on your purchase of this magnificent antenna, which can become your worst enemy......
it is adjusted like a motorized antenna, with a straight mast,
and firmly fixed to the ground because it is still heavy....
then you install your lnb in the center as planned you look for your reference satellite, so hot bird with maximum power, then for the rest everything should be simple if your mast is straight, I will give you a tutorial in French, it will help you just translate it to help you with the installation, knowing that with the double reflector, east and west are reversed....good luck for the rest...
-
Hi friend, I had already talked about this problem, I think you are in multiboot, and images like openvix or openblackhole do not start beyond position 4 of the boot...a priori, they are don't care since nothing is done...You do like me, you do without it....
-
Hi friend Ahmed,
do you know if the KODI plugin works, because often
images from openpli do not have this plugin???
Thanks to you....
-
Hi everyone, yes I am like you, I am waiting for python 3 until the first version can work because I have a good functional list with it and the other is good, but not always very stable....thanks if someone could do it...
-
Hello friend Oktus,
can you make me a bootlogo for the pure2 7.4 octagonsf8008 image with an animals background like you did with the elephant or the squirrel, as you want and also if it is possible, for Openatv 7.4 and Openatv 7.3... ..Thank you very much for your work my friend and good luck to you....
-
Hi everyone, is there a version of this superb skin, without the weather, because it doesn't correspond to my home....thanks to you....