can somebody give me instructions how to open sky de.i try everything and still not work for me.only one channel work - romance tv
i got zgemma h7s -pure2 image
If a channel work, its time to get a fast server, if a channel work the problem is not on your side. Ask your provider or pay a better one.
I have a simple question.
Why some channels worked yesterday and today they not open?
ask your line provider
I did that.
Now clears all channels from sly, no freezing. Super smooth.
Tested on my Gigablue UE 4K with Openatv 6.2 Openatv 6.4 and Openatv 7.1, and I also tested on Gigablue Trio 4K with OpenAtv 6.4
Thanks a lot.
what is not work, generally oscam ?
sky.de only
Ask you server ….. It is icam patched ?
Yes its patched, I can watch some of the sky channels on the list, but with your bin 11714 file I cannot watch any, so I reverted to my old bin 11711 file to watch sky channels.
what is not work, generally oscam ?
sky.de only
Display Morereplace you oscam .bin with new one
stop cam
ftp
usr/bin
name oscam
replace with same name
check rights 755
start cam
It doesnt work with your bin, all black screen.
I revert back to my old oscamicam bin and I can watch some channels
Thanks for your time
tell which image / receiver you use ?
which oscam version patched ??
your .conf .server
Im using it on openatv 6.4 and 7.1 on Gigablue UE 4K
Oscam-icam-arm 11711
.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11711-798
[global]
logfile = /tmp/log/oscam.log
nice = -20
maxlogsize = 1000
preferlocalcards = 1
lb_save = 100
lb_nbest_readers = 10
lb_max_readers = 10
ecmfmt = P: c:s:0 #CW=w:h HOP:j
disablecrccws_only_for = 0500:030B00;1819:00006D;098D:000000;098C:000000;09C4:000000;092B:000000;1884:000000;1841:000000;1813:000068;0B01:000000
[radegast]
port = 9090
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = icam
[streamrelay]
stream_ecm_delay = 0
stream_relay_ctab = 098D
[dvbapi]
enabled = 1
pmt_mode = 0
delayer = 60
user = DVBApi
read_sdt = 2
write_sdt_prov = 1
boxtype = dreambox
[webif]
httpport = 8080
httpcss = /usr/keys/OscamStyleTpl/kitte888_24.css
httptpl = /usr/keys/OscamStyleTpl
httppiconpath = /usr/keys/OscamStyle/picons
httphelplang = de
http_prepend_embedded_css = 1
httprefresh = 2
httppollrefresh = 7
httpshowpicons = 1
httppiconsize = 40
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpallowed = 0.0.0.0-255.255.255.255,192.168.178.0-192.168.178.255
aulow = 120
hideclient_to = 10
http_status_log = 1
.Server
# oscam.server generated automatically by Streamboard OSCAM 1.20_svn SVN r11711-798 --- emu muss laufen ----
# Read more: https://svn.streamboard.tv/osc…/doc/txt/oscam.server.txt
[reader]
label = Icam
protocol = cccam
device =
user =
password =
inactivitytimeout = 30
group = 1
disablecrccws = 1
cccversion = 2.3.2
ccckeepalive = 1
audisabled = 1
[reader]
label = Icam
protocol = cccam
device =
user =
password =
inactivitytimeout = 30
group = 1
disablecrccws = 1
cccversion = 2.3.2
ccckeepalive = 1
audisabled = 1
[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0E00,1010,1801,2600,2602,2610
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000
My line provider is the same. Never had problems on sky till June when they change to ICAM, at that time all channels cleared very well but not now.
Some open ok, and some dont even open, for example sky cinema action HD, sky F1 hd, are ok and no freeze, but sky atantic and sky one does not even open, that does not make any sense to me.
I can watch entire movies with no freezing, but some does not open, i´m confused...
Tell me what is the difference to decode sky one and to decode sky F1 because all of them belong to the same company, Sky.
My ecm on sky are ok lower than 250ms its more than enough to watch without any freeze also
Thanks
I have a simple question.
Why some channels worked yesterday and today they not open?
only a few channels work...
Display MoreDisplay MoreDisplay MoreAfter testing a lot the problem still remain.
Let's see if looking at my configuration we can clarify something.
The MIS satellite I see is Eutelsat 5ºW
Down 2 cables of 4 twin LNBs, with Diseqc
like tuner A, it is not for MIS reception, it necessarily goes to tuner I (I have the preferred tuner on automatic)
Simple setup, Diseqc A/B/C/D.
5ºW is in position C, but only in Tuner I, in Tuner A position C, it is as not configured
Hope this can help you
However, I seem to remember that I ended up returning the Tuner I and J. Because it continuously pixelated. They sent me a new one, with which there were no pixelations.
Although I sold the receiver later (with the new optional tuner)
I have 2 antennas and one diseqc switch
Antenna A fixed position
Antenna B motor
one cable comes from diseqc switch to my receiver, in this case tuner I, but tuner I is pixelating some channels. Not MIS channels. Mis are ok .
If I disconect tuner I and connect the antenna cable to tuner A pixelization disappears, all ok except with tuner A, I will not receive MIS channels obviously.
Why tuner "I" cannot display some "normal channels" correctly?
Do you have 14W satellite? IF yes you will notice some T2-MI channels dont show up with tuner I, but with Gigablue trio 4k they work fine.
Thanks a lot for your help
I am not an expert, but it seems to me that you need another drop cable (without diseqc or with diseqc with twin LNB)
I don't get 14W.
I have only tested T2MI channels at 5W (when there was one).
Only Octagon SF8008 had compatible software
Not Vu+ Duo 4K SE, Dreambox Two, Gigablue Quad 4K, etc.
I did not know that Giga Trio 4K had that software
Best regards
Yes, Gigablue trio 4K share same hardware as the SF, it´s a great receiver and runs cooler than uClan/SF8008. And I have an HDD inside it.
Regarding the UE, maybe i need another cable for each tuner, but the question is, why the optional tuner do that, because its not supposed to do it.
Thanks for your tips
Display MoreAfter testing a lot the problem still remain.
Let's see if looking at my configuration we can clarify something.
The MIS satellite I see is Eutelsat 5ºW
Down 2 cables of 4 twin LNBs, with Diseqc
like tuner A, it is not for MIS reception, it necessarily goes to tuner I (I have the preferred tuner on automatic)
Simple setup, Diseqc A/B/C/D.
5ºW is in position C, but only in Tuner I, in Tuner A position C, it is as not configured
Hope this can help you
However, I seem to remember that I ended up returning the Tuner I and J. Because it continuously pixelated. They sent me a new one, with which there were no pixelations.
Although I sold the receiver later (with the new optional tuner)
I have 2 antennas and one diseqc switch
Antenna A fixed position
Antenna B motor
one cable comes from diseqc switch to my receiver, in this case tuner I, but tuner I is pixelating some channels. Not MIS channels. Mis are ok .
If I disconect tuner I and connect the antenna cable to tuner A pixelization disappears, all ok except with tuner A, I will not receive MIS channels obviously.
Why tuner "I" cannot display some "normal channels" correctly?
Do you have 14W satellite? IF yes you will notice some T2-MI channels dont show up with tuner I, but with Gigablue trio 4k they work fine.
Thanks a lot for your help
7.1 also didnt solve that "problem"
After testing a lot the problem still remain.
No solution for the picons?
Display MoreDisplay MoreWhat is your signal quality?
With this tuner I have :
Focus HD on 13e SNR 82% and AGC 80%
Love nature on 39e I have SNR 90% and AGC 64%
Strange thing is with the FCB tuner I have no problems watching all channels except Multistream ones, and signal is higher than with this DVB-S2X TS2L08 single tuner on both UE 4k.
Describe your installation a bit:
How many antennas do you have?
Do you use Diseqc?
How many cables come down from the antenna?
Engine?
Forgive my ignorance, but on which satellite are the MIS you are interested in?
I did changed now my preferred tuner to "I" tuner, I think it solved my problems!!! Thank you Im going to test it a lot more. But seems ok
My setup nº1 is:
90cm gregorian antenna and one universal lnb
Giagablue UE 4k
No diseqc switches
Diseqc motor 53e to 30w
only one coaxial cable
setup 2:
120cm channel master and another 135cm offset
smr1224 motor and 18"actuator
moteck positioner
diseqc switch for 2 antennas, one antenna for Hispasat fixed position but motorized if needed to move for some reason (39e to 30w), and another motorized one made by channel master (53e to 27,5w) only one cable connected to the receiver.
Confirmed, it solved it completely. No more pixelization. The problem was the auto tuner.
Thank you very much
Muito obrigado.
Muchas Gracias
Display MoreDisplay MoreIm having some problems also with my tuner, i´m using tunner I only, and some channels have problems.
For example if I zap channels on 39E and go to Love nature channel picture start to pixelate.
On 13E same thing happens on Focus channel 11432V.
It happens on openatv 6.4 and 7.1, and with teamblue 6.4 also.
I bought 2 tuners last week same thing on both UE and on both tuners, its impossible they are faulty!
Its not only that channels, they all start to pixelate.
If you only use the optional Tuner I and J, put in "settings" in the preferred tuner the "I", instead of in automatic.
Try and tell me
I only have tuner I active, tuner A its not in automatic, its "Not configured" actually. I think its the same as disabled...
Where is that option to set preferred tuner?
What is your signal quality?
With this tuner I have :
Focus HD on 13e SNR 82% and AGC 80%
Love nature on 39e I have SNR 90% and AGC 64%
Strange thing is with the FCB tuner I have no problems watching all channels except Multistream ones, and signal is higher than with this DVB-S2X TS2L08 single tuner on both UE 4k.
Im having some problems also with my tuner, i´m using tunner I only, and some channels have problems.
For example if I zap channels on 39E and go to Love nature channel picture start to pixelate.
On 13E same thing happens on Focus channel 11432V.
It happens on openatv 6.4 and 7.1, and with teamblue 6.4 also.
I bought 2 tuners last week same thing on both UE and on both tuners, its impossible they are faulty!
Its not only that channels, they all start to pixelate.
Does the quad 4k has the same problem?
Thanks a lot
Display MoreI have bought the Gigablue UHD UE 4K, with the dual DVB-S2X Tuner (tuner I and J) as an option.
I have 4 twin LNBs that go down 2 wires to the receivers (by diseqc).
When I connect a cable to Tuner A, simple configuration, and Tuner B looped to A, with I and J not configured, everything goes well. Logically I do not receive the MIS channels in 5ºW.
When I connect a cable to Tuner I or J, with Tuner A not configured, they pixelate all the channels after a few minutes.
The same happens if instead of 1 cable I connect the 2 that go down, to Tuner A and I. After a few minutes all channels are pixelated.
Could it be that this optional Tuner has a fault?
Any suggestion?
Thanks
Did you solve the pixelating issue?
