as the title says i'm searching for the web api of oscam to send emm to a specific reader
logging with network menu i've found this: http://ip:port/emm_running.html?label=READER-LABEL&emmcaid=CAID&ep=EMM6&emmfile=&action=Launch
i've tried to launch a GET request via python with requests module but it's not working, getting 200 as response tho
i've installed this image with openmultiboot on hdd, but when i boot it stops,
i've tryed to launch enigma2 with debug and i've got this (via telnet)
[eServerSocket] ERROR on bind() (Bad file descriptor)
Segmentation fault
serial says
Why would you need python 3 on this stb, is so slow with python2.7.
I don't think that anyone has builded a python3 image for this box.
For the wifi tho, you could use piterfree backup (don't know if he has posted it on this forum)
To fix ftp:
enter in your decoder via telnet
run vi /etc/vsftpd.conf
press i on you keyboard
change listen to YES
change listen_ipv6 to NO
press esc, then :wq and press enter
open network menu on your box, go to utilities, select ftp and start the service
so it is normal?
is there a way to fix it? because it works fine
Ok, now it works but it shutters
Ragazzi, il metodo per riprodurre gli MSS è privato, non riuscirete mai a far andare il leak di sky it su enigma2, ripparlo o guardarlo su un altro player che non sia quello di bitmovin.
Felice di essere smentito.
others say that work on the dash image in download section .
For me , won t work on openpli vu+ zero
Without any screenshot, i doubt it.
With the dash image you could have watched sky uk, that has now changed keys.
Oh this is very good
i will try rn
But, how can i connect to the box via ethernet?
thank you
They won't work alone, they NEED a separate board such as pc 3000 that costs around 5k euros
You see, this is pretty expensive...
BUT I've found out an article on the Johnny b. forum that talks about an asian paytv box with the same CPU of mine (Italian paytv)
I don't have any piece of hardware to connect via jtag, but they don't seem expensive
If you know a board that can allow jtag connection for around 30 euros pls let me know, i will try to connect via jtag
do you have 8 pins right for both nand? the welding seems smd so you have to do it manually, be careful
nope, them are all bga, making it impossible to solder to it
I found out this datasheet that includes the fbga connections
Thank you so much!
Now, how should i connect this nand to a ch341a?
I could de-solder it, but it is bga, so pretty hard to solder wires to it
Thank you again!
BTW I've already got a modified ch341a that i've used to mod a pc bios
i think that this box uses 2 nands (?)
because one nand has written NAND on it and it is from st
the other one is from spansion and it had a label attached to it with writed NDS (the card that this box uses) and a number (1.38 if im not wrong)
idk, here attached a close-up photo of the 2 chips
Yeah, sorry i didn't notice that it was covered by thermal paste
It is a Broadcom bcm7325skfsba1g
Thank you so much!
the "only" problem is that the sky decoder that i have (Pace ds831ns HD) does not have any eeprom, but the decoder uses a NAND, making it pretty hard/expensive to dump, here is a photo of the box motherboard in case some of you will find it useful
PS: i've already tried to connect via UART to the box by guessing the tx and rx contacts with no success (now i've got a box that doesn't output anything on the tv :( )
As the title says i'm looking for a s@y italia boxes (like myskyhd or sky hd) firmware dump
Thank you
Hi everybody!
Here is the latest oscam svn (r11711) for windows
Compiled with cygwin, added support for pcsc readers.
Released with Oscam Launcher, great if you plan to use your pc as a Oscam Server
Tested with a pcsc reader and a tvsat (183d) smartcard
Enjoy!
Well, i can't find a wireless driver for spark for the RTL8191SU. I've tried the drivers for: 8192ce, 8192cu and 8712u but none of these are working.
Any help will be appreciated
Thanks
Well, kinda, officialy OpenPLi doesn't support this box, but there are some backups of OpenPLi on the forum
so, yes, i believe that OpenPLi exists for my box.
