UPLOAD FIXED FIRST POST
Posts by parageria
-
-
Parageria, for the first time, it happens that I really do not do anything to me after installing an image on an externalUSB with a plug-in of openmultiboot or mmboot-dreambox_1.42_ and booting to get the image up and running. It stops in half booting and goes into a permanent restart. Do you have a problem with this problem on the dm800s, while this was not the case with your previous OBH image.
sorry but i forgot to put on /usr/share/enigma2/po en_GB lang, this is needed for first boot
for now do this (i will upload again image )
when reboot enigma2
telnet to dreambox and give init 4 command
move en_GB folder to /usr/share/enigma2/po dir
and give init 3
-
this image, vuplus, modify to work on dm800se sim2 84d
WORKS on flash
NOTE: image is big and need flashexpader
on zip there is nfi file and 3 folders
a)install nfi on flash b) install flashexpader from addons c) move with ftp , gstreamer and samba folder to usr/lib dir
webif folder to /usr/lib/enigma2/python/Plugins/Extension dir
WIFI drivers on 3.2-dm800se.zip
extract and move 3.2-dm800se folder to /lib/modules dir - replace if needed
/3.2-dm800se/kernel/net/ must move on your box anyway
/3.2-dm800se/kernel/drivers move any driver you need
for multiboot , install nfi (as backup it is patched), and move folders to directoriesFEEDS - ADDONS work
ONLINE UPDATE workDOWNLOAD:) FIXED
-
but where is the wifi driver before this version wifi rt2800 works fine without installing anythink
don't include drivers for more space
-
this image, vuplus, modify to work on dm800se sim2 84d
WORKS on flash
NOTE: image is big and need flashexpader
on zip there is nfi file and 3 folders
a)install nfi on flash b) install flashexpader from addons c) move with ftp , gstreamer and samba folder to usr/lib dir
openwebif folder to /usr/lib/enigma2/python/Plugins/Extension dir
for multiboot , install nfi (as backup it is patched), and move folders to directories
FEEDS - ADDONS work
ONLINE UPDATE workDOWNLOAD :)
-
this image, vuplus, modify to work on dm800se sim2 84d
WORKS on flash
NOTE: image is big and need flashexpader
on zip there is nfi file and 3 folders
a)install nfi on flash b) install flashexpader from addons c) move with ftp , gstreamer and samba folder to usr/lib dir
webif folder to /usr/lib/enigma2/python/Plugins/Extension dir
for multiboot , install nfi (as backup it is patched), and move folders to directoriesmenu/setup/system/customize/setup mode : expert (for to see full menu)
for everything else OPENPLI-6.0-DM800SE-SIM2-CR-19072017-ParageriaGS
:) AeonMOD_Adrenalinnrw-FHD-mod_ParageriaGS-Pli_6.0/6.1-v5
have modify (Adrenalinnrw mod for atv , sharp987 mod for pli, skins) to work on openpli for receivers with poor cpu like dm800se.
extract zip file, see some screenshots, and move usr dir to root (/) of your box, select skin from menu ,restart enigma
NOTE
A) skin works stable and fast , maybe some windows or fonts is small, but when have time, will fix it.
B) don't support skins , i make it for me, and upload it here.
v5
09/04/2018
fix fonts and screens, infobar current weather , second infobar day2 , day3, EPG
[edit: in the title i use for m letter, the one from my lang (Gr) μ]
FEEDS - ADDONS work
ONLINE UPDATE workDOWNLOAD
http://www.mediafire.com/file/…-15012018-ParageriaGS.zip
-
-
Very sorry my fault , i forgot to put feeds ;(
upload it extract and put folder opkg on /etc
Copy any lang folder on /usr/share/enigma2/po directory -
if you want,
add this logo after extract to /usr/share dir
-
OPENPLI - 6.1- 7? ;)
this image it s homebuild for dm800se
NOTE : PYTHON 2.7.13
i have change opkg config files to 6.1 vuzero, this maybe be problem(real openpli 6.1 rc,have python 2.7.12) if you want to install some plugins, installer try to upgrade (real downgrade) some libs.
But for the most usual plugins not problem.
(if you want any special plugin write to this thread and upload ipk file)
feeds addons work
and of curse DON'T DOING ANY SOFTWARE UPDATE
aeonmod-adrenalinnrw-fhd-mod-parageriags-pli-6-0-6-1-v4
DOWNLOAD
-
LED dispaly working,please include feed (for install ffmeg and serviceapp) ,and json module ( for IPTV player),tempfancontrol (sistemplugin).I put it in manual feed for you image OpenPli for sim 2,json and installed ffmeg,exteplayer...All working fine..Thanks #parageria..
ok upload it in thread for original images , after make the changes
-
openpli 6.1 - 7?
test4 99.99% work - test
python 2.7.13
gstreamer 1.12.3
openpli-dm800se-ORIGINAL-homebuild-test4.nfi
after test i make some change...
-
maybe stop when load enigma2
will try next week
thanks for test
-
not LED display,other work fine ..fantastic...For your image OpenPli 6.1 rc for sim2 problem with LED display does not exist..Thanks
led have only light or yellow line with light?
-
-
it looks like the boot process did not finish
right, me too on my 800se clone (sun ray sr4)
i upload in the next hours new test2
-
Hello friend
I installed the image in my original 800se.
The image is extremely fast, I am thrilled.
However, there is a problem with the display. I upload a picture that shows how the problem looks. The display looks like the picture, it looks like the boot process did not finish, however the box is working properly and it's extremely fast.
Please solve the problem with the display and the image will be perfect.
Thank you for your good will and hard work.
P.S. I expect that you will soon upload a test2 image for testing.
I am ready and would say, impatient .....
note it is test image without some plugins and libs folders
for lcd i don't think is possible to fix it, will see
-
Is it possible to change the size of the flash and make image install on internal hardrive rather than the box itself so this way no need for flashexpanders etc .... and you can have as many plugins, skins and so as much as you like ?
You can use this script https://pastebin.com/Zm31ZB9W (Thanks to Jasper, it was taken from one of him image) to move all of your flash to USB drive. It's not universal, it NEEDS some modifications (in opkg section, if versions/packages newer or absent or changed his name) and it NEEDS that boot partitions mounted (in latest OpenPLI images it's not monted, don't know why, ease to mount with - 'mount -t jffs2 /dev/mtdblock2 /boot'). You can run it from ssh/telnet session.
P.S. I think maintainers must include in image only basic things to reduce it size and use Jasper script for moving to USBstick/HDD and ask what install for the rest like this do in Ubuntu installs on first boot. This is just my dream ;)for your and my dream need initramfs that is embedded into the kernel and loaded before the root partition is mounted, so must compile kernel with initramfs that boot from flash, mount USB/HDD and boot rootfs, but who make initramfs:?:;)
-
i upload it in the next hour
NOTE
i don't have dm800se orig to test it
you must be a tester
No problem, man, my pleasure.
only for test
-
i upload it in the next hour
NOTE
i don't have dm800se orig to test it
you must be a tester