Posts by parageria

Quote from frank087234

Quote

5.add an old very nice skin HD DarkSky with weather

this nice skin DarkSky is missing second info bar, if you can add it plz... thanks mate

parageria

FIXED

DarkSky skin (added-modded special second infobar)

#first post

Quote from amon35

Quote from teak-won-do

Not BH4.4 & spa image visible when it restarts

, multiboot not boot. Openpli 10.2 image.

if you know , use dreamelite 4.1 + mmboot 1.42 on internal flash or openbh 0.6, 0r opendroid 6.8 or opennfr ......

NOT openpli

Quote from giorbak

These drivers are not compatible with Neutrino.

I tried following commands with Telnet:

opkg update

opkg install kernel-module-r8712u

opkg install firmware-rtl8712u

reboot

Modules 3.9.6 have been installed that contain Wlan driver, but in the menu I have no choice for WLAN.

Maybe I'm doing something wrong. I'll try it again.

Display More

attention

we need modules for dm800se

in any modded image, if you have modules in different place than /lib/modules/3.2-dm800se, it s better to telnet and give:

insmod /directory to so file

for example

insmod /lib/modules/3.2-dm800se/kernel/drivers/net/tun.ko

and i repeat in this image i have added enigma2 for to boot not for to work

in normal season for vuduo it s boot and work without enigma2

Quote from samirson75

please sirs we need a shrt video or powerpoint explaining how to use this BOOT from A to Z

what do not you understand ?

UPGRADE 22102020

NEW INSTALLATION

Quote from samirson75

but sir i need the image which i could use it in internal this version it too big fo external use it

i don t have it

must to understand ,there is no images any more, for 64mb flash

Quote from samirson75

Good morning sir OPENFR and her Multiboot if you would to make for us a little explain how to use multiboot with OPENFR image i know that u r a kind man

is exactly the same as OMB , exept the names of folders

doing everything like OMB

Quote from samirson75

Sir parageria i need this image to use it in as internal image i didn't find it

what image?

Quote from frank087234

When I click information >> service, spinner appear, and image hangs.

can you have a look plz.

parageria

i dont have it, in 6.4 no problem

maybe skin

Quote from samirson75

Hi sir frank please could u put here an explain how to use this internal image with NFR BOOT and a link for this internal use

NFR boot work only with 6.3 not with 7.0

Quote from hall9000

parageria Everything went well.:wink:

I have a decoder with 3 tuners. 2 satellite and 1 terrestrial. With 800sehd I installed this ipk (trialtuner20b_dm800se_sr4_oe20.ipk)

Can I install it and run it like i did on 800e HD ?

your receiver boot with multiboot image?

you can install it on any multiboot image that support it

Quote from hall9000

Hi parageria

Decoder ddn't start...

I had already decided to do everything from scratch

5b4d7dc5da4.png

Now what I have to do?

Reboot or turn off and on again decoder?

Display More

turn off receiver- put out usb - and turn on

Quote from hall9000

From telnet (reboot) the 1st time

switch off decoder and restart the second...

take off usb and try again

Quote from hall9000

Hi parageria

We sang victory too soon .... :crying:

The decoder after reboot (I tried 4 times) does not start and does not appear text box with image choice

Thanks for you help

Display More

how reboot?

Quote from hall9000

Hello

Before even reading your answer I had already decided to do everything from scratch.

Strange that it didn't ask me to install openmultiboot because it was already there and I didn't have to activate swap.

I left the original folder and copied the files without changing anything only permissions 755 and this is the result. We hope well....

54aec12a67.png

Thanks

Display More

you are on good way

Quote from hall9000

Quote from parageria

fix permissions to 755

telnet to receiver and :

cd /media/usb/open-multiboot-upload (enter)

chmod 755 *(enter)

do it this only the first time

Display More

Hello parageria

Nothing changes .....Do I have to start from point 2 and cancel what I have done?

Thanks for you help

Display More

if all directories and files are in correct position the only thing i think is

you are on windows. if you open with a windows text editor a unix script, to change something, and save this as text lost unix

must open scripts on windows with Notepad++ and save as Unix script file

Quote from hall9000

365bce2e42ef5d4d7.pnge0b2b3b6d77.pnge9ce0bf89fd1717.png

Thanks

Now I proceed with the others steps ...

4.now ftp to your receiver and move open-multiboot-upload folder to /media/usb replace

give permissions 755 on inside files

2789a0b2b1816221decaaf4.png

2.

now ftp to your receiver and move open-multiboot-upload folder (from download - extract zip file) to /media/usb

give permissions 755 on inside files

1bdcd45b3a99d469c08746a8.png

3.move openspa7.4 nfi image to /media/usb/open-multiboot-upload

07684e1b8d52523.png

4.edit unpack-nfi.sh file (in /media/usb/open-multiboot-upload) the last line and replace OPENSPA"with OPENSPA-7.4

8fdce265.png

5.telnet and give command :

cd /media/usb/open-multiboot-upload (enter)

./unpack-nfi.sh (enter)

Seems like it can't unpack nfi file...:unhappy:

Display More

fix permissions to 755

telnet to receiver and :

cd /media/usb/open-multiboot-upload (enter)

chmod 755 *(enter)

do it this only the first time

Quote from hall9000

d81dfaf41236884.pngeeb59ef9b85edcd9e8935.png

3.From plugins menu click openmultiboot ( asked me to install module-nandsim )

change usb or format to ext3

Quote from hall9000

Quote from parageria

Quote from hall9000

have you change lang?

keep only eng

Yes I did and I also disabled the disecq since this image has to be used as a multiboot...

Was I wrong?

Will this be the reason for the looping boot?

Hall

Display More

i said dont touch enything

use hdmi > 1080i > multi or 50hz

Quote from hall9000

Thanks for help me :smiling:

openbh 0.6 dm800se

dm800se login: root

root@dm800se:~# init 4

root@dm800se:~# enigma2

[Enigma2] PYTHONPATH: /usr/lib/enigma2/python

[Enigma2] DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10

[Enigma2] ENIGMA2_DEBUG settings: Level=4

< 248.672> [eInit] + (1) Background File Eraser

< 248.674> [eInit] + (5) Tuxtxt

< 248.674> [eInit] + (8) graphics acceleration manager

< 248.682> [eInit] + (9) GFBDC

< 248.683> [fb] /dev/fb0: 16384k video mem

< 248.687> [fb] double buffering available!

< 249.004> [gFBDC] resolution: 1920x1080x32 stride=7680, 184kB available for acceleration surfaces.

< 249.004> [eInit] + (9) gLCD

< 249.004> [eFbLCD] /dev/fb1: No such file or directory

< 249.004> [eFbLCD] framebuffer /dev/fb1 not available

< 249.005> [eDboxLCD] xres=96, yres=64, bpp=16 lcd_type=3

< 249.005> [eLCD] (96x64x16) buffer 0x8dc478 12288 bytes, stride 192

< 249.005> [eLCD] (96x64x16) buffer 0x945530 12288 bytes, stride 192

< 249.005> [gLCDDC] resolution: 96x64x16 stride=192

< 249.006> [eInit] + (9) Font Render Class

< 249.006> [Font] initializing lib...

< 249.007> [Font] loading fonts...

< 249.007> [Font] Intializing font cache, using max. 4MB...

< 249.007> [eInit] + (10) gRC

< 249.009> [gRC] thread created successfully

< 249.009> [eInit] + (15) eWindowStyleManager

< 249.009> [eInit] + (20) DVB-CI UI

< 249.009> [eInit] + (20) UHF Modulator

< 249.009> [eRFmod] couldnt open /dev/rfmod0: No such file or directory

< 249.009> [eInit] + (20) RC Input layer

< 249.010> [eInit] + (20) misc options

< 249.010> [eInit] + (20) AVSwitch Driver

< 249.010> [eAVSwitch] failed to open /dev/dbox/fp0 to monitor vcr scart slow blanking changed: No such file or directory

< 249.010> [eInit] + (21) input device driver

< 249.010> [eRCInputEventDriver] devicename=dreambox front panel

< 249.010> [eRCDeviceInputDev] device "dreambox front panel" is a remotecontrol

< 249.011> [eRCInputEventDriver] devicename=dreambox remote control (native)

< 249.011> [eRCDeviceInputDev] device "dreambox advanced remote control (native)" is a remotecontrol

< 249.011> [eRCInputEventDriver] devicename=dreambox advanced remote control (native)

< 249.011> [eRCDeviceInputDev] device "dreambox advanced remote control (native)" is a remotecontrol

< 249.012> [eRCInputEventDriver] devicename=dreambox ir keyboard

< 249.012> [eRCDeviceInputDev] device "dreambox ir keyboard" is a keyboard

< 249.012> [eRCInputEventDriver] devicename=dreambox ir mouse

< 249.012> [eRCDeviceInputDev] device "dreambox ir mouse" is a mouse

< 249.012> [eInputDevice] Found 5 input devices.

< 249.012> [eInit] + (22) Hdmi CEC driver

< 249.012> [eHdmiCEC] cannot open /dev/hdmi_cec: No such file or directory

< 249.012> [eInit] + (30) eActionMap

< 249.012> [eInit] + (35) CI Slots

< 249.013> [CI] scanning for common interfaces..

< 249.014> [CI] cannot open /proc/stb/tsmux/input0

< 249.014> [CI] cannot open /proc/stb/tsmux/input1

< 249.014> [CI] done, found 0 common interface slots

< 249.014> [eInit] + (35) CA handler

< 249.014> [eInit] + (40) eServiceCenter

< 249.015> [eServiceCenter] settings instance.

< 249.015> [eInit] + (41) eServiceFactoryDVD

< 249.015> [eInit] + (41) eServiceFactoryHDMI

< 249.015> [eInit] + (41) eServiceFactoryM2TS

< 249.015> [eInit] + (41) eServiceFactoryMP3

< 249.015> [eInit] + (41) eServiceFactoryFS

< 249.016> [eInit] + (41) eServiceFactoryDVB

< 249.016> [eInit] + (41) Encoders

< 249.016> [eInit] + (41) Stream server

< 249.017> [eInit] reached rl 70

< 249.018> [eDVBDB] ---- opening lame channel db

< 249.018> [eDVBDB] reading services (version 4)

< 249.019> [eDVBDB] loaded 0 channels/transponders and 0 services

< 249.019> [eDVBResourceManager] scanning for frontends..

< 249.019> [eDVBFrontend] opening frontend 0

< 249.025> [eDVBFrontend] frontend 0 has DVB API 504

< 249.034> [eDVBFrontend] try to close frontend 0

< 249.043> [eDVBAdapterLinux] get demux 0

< 249.043> [eDVBAdapterLinux] get demux 1

< 249.043> [eDVBAdapterLinux] get demux 2

< 249.043> [eDVBAdapterLinux] get demux 3

< 249.043> [eDVBAdapterLinux] get demux 4

< 249.044> [eDVBResourceManager] found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 3

< 249.045> [eDVBLocalTimeHandler] Use valid Linux Time :) (RTC?)

< 249.045> [eEPGCache] Initialized EPGCache (wait for setCacheFile call now)

< 249.049> [MAIN] Loading spinners...

< 249.086> [ePNG] couldn't open /usr/share/enigma2/spinner/wait9.png

< 249.086> [MAIN] found 8 spinner!

[MAIN] executing main

< 249.087> [setIoPrio] best-effort level 3 ok

< 250.261> [Misc_Options] 12Vdetect cannot open /proc/stb/misc/12V_output: No such file or directory

< 250.283> [Harddisk] enumerating block devices...

< 250.348> [Harddisk] enumerating network mounts...

< 250.380> [Config] Config file loaded ok...

< 251.110> [gRC] main thread is non-idle! display spinner!

< 251.696> [NimManager] Reading satellites.xml

< 252.975> [SecConfigure] sec config cleared

< 252.976> [eDVBFrontend] setSlotInfo for dvb frontend 0 to slotid 0, descr Alps BSBE2, need rotorworkaround Yes, enabled No, DVB-S2 Yes

< 252.978> [SecConfigure] slot: 0 configmode: nothing

< 252.979> [SecConfigure] sec config completed

< 252.980> [NimManager] slotname = Tuner A, slotdescription = Alps BSBE2, multitype = False

< 253.123> [MovieSelection] Bluray Player is not installed: cannot import name BlurayPlayer

< 254.455> [eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv

< 254.456> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv

< 254.456> [eDVBDB] 0 entries in Bouquet userbouquet.favourites.tv

< 254.456> [eDVBDB] 1 entries in Bouquet bouquets.tv

< 254.457> [eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio

< 254.458> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio

< 254.458> [eDVBDB] 0 entries in Bouquet userbouquet.favourites.radio

< 254.458> [eDVBDB] 1 entries in Bouquet bouquets.radio

< 254.458> [eDVBDB] Renumbering...

< 254.506> [Time By]: Transponder

< 254.507> [eEPGCache] time updated.. but cache file not set yet.. dont start epg!!

< 256.142> [Image Flashed] 2020-10-15

< 256.185> [Ipkg] Added to OPKG destinations: /

< 256.695> [Font] adding font /usr/share/fonts/Roboto-Bold.ttf -> Regular

< 256.698> [Font] adding font /usr/share/fonts/Roboto-BoldItalic.ttf -> Italic

< 256.700> [Font] adding font /usr/share/fonts/Roboto-Black.ttf -> Bold

< 256.701> [Font] adding font /usr/share/fonts/Roboto-BlackItalic.ttf -> Boldit

< 256.703> [Font] adding font /usr/share/fonts/nmsbd.ttf -> Subtitlefont

< 256.705> [Font] adding font /usr/share/fonts/lcd.ttf -> LCD

< 256.707> [Font] adding font /usr/share/fonts/ae_AlMateen.ttf -> Replacement

< 256.708> [Font] adding font /usr/share/fonts/tuxtxt.ttf -> Console

< 256.742> [Font] adding font /usr/share/fonts/tiny.ttf -> Regular

< 256.744> [Font] adding font /usr/share/fonts/ae_AlMateen.ttf -> Replacement

< 256.746> [Font] adding font /usr/share/fonts/tiny.ttf -> Subtitlefont

< 256.748> [Font] adding font /usr/share/fonts/tuxtxt.ttf -> Console

< 256.881> [Font] adding font /usr/share/fonts/LiberationSans-Regular.ttf -> Subs

< 256.884> [Font] adding font /usr/share/fonts/LiberationSans-Italic.ttf -> Subsi

< 256.886> [Font] adding font /usr/share/fonts/LiberationSans-Bold.ttf -> Subsb

< 256.888> [Font] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf -> Subsz

< 256.895> [Font] adding font /usr/share/fonts/nmsbd.ttf -> FdLcD

< 256.981> [InputDevice] Unknown device type: dreambox front panel

< 257.138> [Keyboard] Activating keymap: Default (US)

< 257.139> [eConsoleAppContainer] Starting /bin/sh

< 257.196> [Language] Activating language Italiano

< 257.200> [Language] Selected language does not exist!

< 257.380> [UserInterfacePositioner] Setting OSD position: 0 720 0 576

< 257.381> [UserInterfacePositioner] Setting OSD alpha: 255

< 257.412> Traceback (most recent call last):

< 257.412> File "/usr/lib/enigma2/python/mytest.py", line 608, in <module>

< 257.416> Components.AVSwitch.InitAVSwitch()

< 257.417> File "/usr/lib/enigma2/python/Components/AVSwitch.py", line 360, in InitAVSwitch

< 257.417> NameError: global name 'ngettext' is not defined

< 257.423> [eDVBDB] ---- saving lame channel db

< 257.424> [eDVBDB] saved 0 channels and 0 services!

< 257.427> [eDVBResourceManager] release cached channel (timer timeout)

< 257.428> [eDVBLocalTimeHandler] set RTC to previous valid time

< 257.428> [eDVBLocalTimerHandler] set RTC Time

< 257.431> [eInit] - (41) eServiceFactoryDVD

< 257.431> [eInit] - (41) eServiceFactoryHDMI

< 257.431> [eInit] - (41) eServiceFactoryM2TS

< 257.431> [eInit] - (41) eServiceFactoryMP3

< 257.431> [eInit] - (41) eServiceFactoryFS

< 257.431> [eInit] - (41) eServiceFactoryDVB

< 257.431> [eInit] - (41) Encoders

< 257.432> [eInit] - (41) Stream server

< 257.432> [eInit] - (40) eServiceCenter

< 257.432> [eServiceCenter] clear instance

< 257.432> [eInit] - (35) CI Slots

< 257.432> [eInit] - (35) CA handler

< 257.432> [eInit] - (30) eActionMap

< 257.432> [eInit] - (22) Hdmi CEC driver

< 257.433> [eInit] - (21) input device driver

< 257.588> [eInit] - (20) DVB-CI UI

< 257.588> [eInit] - (20) UHF Modulator

< 257.588> [eInit] - (20) RC Input layer

< 257.588> [eInit] - (20) misc options

< 257.588> [eInit] - (20) AVSwitch Driver

< 257.588> [eInit] - (15) eWindowStyleManager

< 257.589> [eInit] - (10) gRC

< 257.589> [gRC] waiting for gRC thread shutdown

< 257.591> [gRC] thread has finished

< 257.592> [eInit] - (9) GFBDC

< 257.594> [eInit] - (9) gLCD

< 257.594> [eInit] - (9) Font Render Class

< 257.594> [eInit] - (8) graphics acceleration manager

< 257.595> [eInit] - (5) Tuxtxt

< 257.595> [eInit] - (1) Background File Eraser

< 257.595> [eInit] reached rl -1

root@dm800se:~#

Display More

have you change lang?

keep only eng