Works fine on Vu+ Ultimo4K - have you remembered to CHMOD 755 or 777
Posts by lincsat
-
-
I've noticed that this version AU's for AFN (9e) very quickly. I've seen typically 1-2 minutes, previous versions often took over 10 mins to AU.
-
I can confirm that the full version is crashing on the latest ViX on an Ultimo4K but the lite version is working fine
-
You might have got it slightly wrong, they may have been dumping the rsa key from the chip to allow them to use their cards in 3rd party boxes like dreambox/vu box. This allows the card to be shared. Virgin have stopped this on the sport channels as they no longer support the boxes that can be dumped.
It's possible the newer boxes could be dumped but they are cardless, so no card to use in an unofficial box. VM have only stopped most of the Sky Sports HD channels on the older boxes, others sports channels (including Sky Sports Mix HD and Sky Sports News HD) are still available on older boxes that use cards
-
I found it easiest to just use NCam rather than OScam. It's basically the same but easier to configure for PV
Ok can you please send me the ncam link?
Thanks i will let you know when everything works perfect
Me too. No AFN since last evening.
Tried ncam for arm. No webif? Nothing decoded.
Also none of my other pv channels decoded. Tried swapping key files from the prev. version of 11438.
Looked for an oscam emu arm with hash 20-21. No luck
Using vuplus-team.com-oscampowervu-arm_OpenAtv-Rv-11438_all.ipk.
Anyone that can help us?WebIF is almost exactly the same. You do need to change all the config files from oscam to ncam, so oscam.server becomes ncam.server etc. I'm currently using ncam 7.1 downloaded from Ncam 7.1 compiled and patched by marouan & READ
-
I find the biggest issue with IPTV is the bandwidth, HDMI capture and de-interlacing used. A "HD" stream using only 1-3Mbit and converted/de-interlaced to 720p or 1080p can look a little jerky and pixelated with fast movement.
It's getting better but is going to continue to struggle IMO until there is more bandwidth used for uploading streams
-
I found it easiest to just use NCam rather than OScam. It's basically the same but easier to configure for PV
-
Yes, the ARM build is working
-
the powwer vu not working black screen :(
with all pw vu !!
AFN is working with Autoroll using the same settings as 6.9
-
You can extract the MIPS binary from the archive with 7-Zip or use the new 6.9 release
-
AFN on 9e is open with this release
-
Does AFN clear using Ncam 6.8 ?
Yes
I'm using this version!
Then download the MIPs binary and overwrite the existing one on your box with the new one
-
If there isn't an Installer for your image, simply download the MIPs version and overwrite the binary using the same file name
-
Ncam 6.5 compiled and patched by marouan & READ
not supported dreambox dm800hd pvr clone fw black hole 3.2.1c ?????I think they doesnt make ncam for arm receivers anymore, only for mips based ones. This is good buseness for some new receiver types, but not for the rest-like us.
The link for the ARM version also works well on my Ultimo4K
-
9e AFN channels are still open and AU with build 5.5, they are also OK with build 5.6
Dear kindly share configuration files for AFN 9e
Configs have been posted on this forum many times, just look and you will find
-
9e AFN channels are still open and AU with build 5.5, they are also OK with build 5.6
-
No, but you can go through the configs posted on the forum and copy them all into your softcam.key file. Just read the forum, it's much more satisfying when you don't get spoonfed.
-
If you look through the configs posted on the forum you will find around a dozen EMM keys for AFN, over the last couple of days I've confirmed that at least 3 of those are actively updating. Longest I've had to wait is 30 mins, usually a lot quicker. I'm using OpenViX and have tried both an Ultimo4K and a ZGemma box.
-
I'm using OpenViX on an Ultimo4k using configs posted in the config section.
There are plenty of suggestions what to try in the config section and plenty of softcam.key files, if you go through all the softcam.key files on the forum you will find around a dozen EMM keys for AFN, I can confirm that at least 3 of those are currently active. It should be noted that since this NCam was released, AFN are rolling keys every 2-3 Hours now
-
post the working emm keys for softcam to verify au
Please do NOT post working EMM keys in open forum - don't make it too easy for AFN/Powervu to kill them
