I installed in various ways via telnet and ipk with the remote control after reboot it shows as a few posts above scren .. there was no problem with the installation..
Posts by Kosta 12
-
-
does it mean that after installing FreeServer it will show that the plugin is missing? Because it hasn't shown yet.
I installed a new image 8.3, I made updates, I uploaded FreeServer and I found nothing else and it doesn't work..
FreeServer can never be loaded on OpenPli
-
It's great, but there's a lot of it and you need to know what's missing..🤔
-
I also installed curl and then the error now installs OpenPli 8.3 and I will see because FreeServer cannot be uploaded to 9.0 but it does not work as it should .. I do not know in what order what to upload via telnet..
-
You see... I didn't think of that, everything's fine now... Thanks
FreeServer is installed but when I press the yellow button there is no such file or directory.
too many problems with OpenPli when FreeServer was installed, it doesn't work again can't download servers yellow or info always error.. -
1 opkg update; opkg install python3
2 opkg install python-requests
3 opkg install python3-requests
4 wget https://ia803104.us.archive.or…ecccamserver/installer.sh -O - | /bin/sh
opkg update
opkg install python-imaging
opkg install /tmp/enigma2-plugin-extensions-freeserver_8.3.7_all.ipk
It's all about installation and then crap...
-
sequentially pasted as you gave at the end installation telnet opk freeServer 8.3.7 and ass (No module named)
Gigablue Quad 4K and installed as 3 image, how are you doing, I don't know what I'm doing wrong...
-
And how do you install FreeServer 8.3.7 then?
-
that's how I installed it and then you can't install FreeServer 8.3.7 on OpenPli 9.0
I removed OpenPli because FreeServer from newer versions never work on this image.
I have also Openpli 9.0 RC
But i have installed Freeserver with the commandline. and with sucess,.
if you paste the follow commands in your terminal windows it has to work.
do it at the following sequence. so line for line and not select the numbers i wrote before the command.
1 opkg update; opkg install python3
2 opkg install python-requests
3 opkg install python3-requests
4 wget https://ia803104.us.archive.or…ecccamserver/installer.sh -O - | /bin/sh
4 wget https://ia803104.us.archive.or…ecccamserver/installer.sh -O - | /bin/sh
I don't know how to do it, copy the whole thing or what... because after everything I installed Freeserver 8.3.7 and it still shows the error
This point 4 I paste the whole thing, nothing happens
-
that's how I installed it and then you can't install FreeServer 8.3.7 on OpenPli 9.0
I removed OpenPli because FreeServer from newer versions never work on this image.
I have also Openpli 9.0 RC
But i have installed Freeserver with the commandline. and with sucess,.
if you paste the follow commands in your terminal windows it has to work.
do it at the following sequence. so line for line and not select the numbers i wrote before the command.
1 opkg update; opkg install python3
2 opkg install python-requests
3 opkg install python3-requests
4 wget https://ia803104.us.archive.or…ecccamserver/installer.sh -O - | /bin/sh
4 wget https://ia803104.us.archive.or…ecccamserver/installer.sh -O - | /bin/sh
I don't know how to do it, copy the whole thing or what... because after everything I installed Freeserver 8.3.7 and it still shows the error
-
I have to check if it works.. Thanks for the tips, maybe it will work..
-
I have to restart every time I don't like these vavoo because I don't turn on right away..
-
-
I already know what to do. I simply copied Home to USB from OpenAtv 6.4, then I copied the entire Home to OpenAtv7.3 and everything works fine. Of course I had to upload my list so that the channels would show up, I used s4aUpdater
I had OpenAtv 7.3 updates 131 updates after the Reboot box was completed and again I did not want to turn on Vavoo but I copied it again from USB Home and after reboot it works
-
I don't know what happened to me, but Vavoo 34 on OpenAtv 7.3 on 6.4 doesn't work anymore, hm .. is there any advice for this? I have a list saved on USB and even if I upload the OpenAtv 6.4 image again, I will upload the list, it works .. on OpenAtv 7.3 it does not work, is there any way to do it?
-
I saved the list with s4aUpdater and then uploaded it again and everything works..
-
that's how I installed it and then you can't install FreeServer 8.3.7 on OpenPli 9.0
I removed OpenPli because FreeServer from newer versions never work on this image.
-
Hello, is it possible to install FreeServer 8.3.7 on OpenPli 9.0? because after installation it is not in the plugins ...
-
why press blue? it is used only once at the beginning, if it does not fly, it is enough to restart the box and it will turn on..
-