Dinobot4k+使用openatv 7.6 beta固件可以正常安装oscam.ipk，但是安装cccam.ipk后，cccam没有出现在列表中。这个问题在6.3--7.5.1版本也会出现，请问是什么原因？之前用dm800的时候没有出现过这个问题。
Posts by zyjzy
-
-
There are some minor issues with the Android 8 firmware of dinobot4K+elite:
1. Google Play Store crashes after upgrading, YouTube cannot be opened after upgrading
2. USB cannot be set as an internal storage device and can only be used as an external sdcard.
We hope the manufacturer can update Android 8
-
You have a flash drive issue ...formate fat 32 ... Use a small size 4 gb , 8 gb 16 gb .
That's right, I always refresh 4K+and U5Mini like this, very smoothly
-
Still get stuck for about 10 minutes For the first time After passing update. zip
This is normal because To install a new software programme
However, both Dinobot4K+and U5mini load quickly, update, The machine will restart as soon as the progress bar is full. But Elite is different. I used your update - A8+E2, and the progress bar was already full. It would last for a long time and would not disappear, which made me mistakenly think that the machine had crashed, so I manually shut it down, but it failed. The last successful attempt was when I ignored it and let it process freely. But I was looking at my phone and didn't expect it to restart after a long time. I succeeded, what a pleasant surprise. So I think upgrading is very slow, which is a characteristic of Elite, and we must not be impatient.
-
I have successfully upgraded Dinobot4k+Elite to Android 8, which can be considered an unexpected success. Because multiple methods have been tried, it seems that the upgrade cannot be successful. Hitool only helped us restore some machine functions, and we still need to continue updating. But the problem is that even if the progress bar is already full, the update cycle will still get stuck for about 10 minutes, which is a phenomenon that other Dinobots have never experienced before. Elite is simply a freak. Just when I reached the seventh time, I ignored its circular appearance and went to look up information. After about ten minutes, a miracle occurred as the machine automatically restarted and the zip update was successful! So it's an unexpected success
-
This is a true beginner tutorial that will help many people. Thank you
-
A very thoughtful tutorial, I will study it seriously
-
-
如果我了解 HTool STB 的用法，我会决定亲自尝试一下
-
建议：因为我没有软件更新。zip Android 7 + ENIGMA2
最好在提供任何软件之前...
通过 HiTool 从您的设备中提取原始软件...
感谢你们提供的软件和资料。我已经下载了HiTool-STB-5.0.31版本。之前提到过，我从来没有使用过HiTool-STB，只是用USB升级成功过update.zip文件。目前状况，我已经通过USB恢复了dinobot4K+。谈到使用HiTool-STB，我完全是新手。最近一直在找这方面的教程，但感觉还不够详细。我买了一根九针串口转3.5的线，老板说这种线有两种连接方式：一种是2-2,3-3,5-5，另一种是2-3,3-2,5-5。我不知道该选哪一种。我什至不知道线应该插在机器的哪个位置，也不知道打开HiTool需要导入哪些文件，所以我决定把机器送去请专家帮我升级。谢谢你们的帮助。线.jpg
-
建议：因为我没有软件更新。zip Android 7 + ENIGMA2
最好在传递任何软件之前...
通过 HiTool 从您的设备中提取原始软件...
：啤酒1： ：啤酒1：
-
thank you ：戴着墨镜的笑脸： ：戴着墨镜的笑脸：
-
等到晚上上传更新.zip Android 8 + ENIGMA2
Thank you very much
-
Display More
不，有一个Android 8 + ENIGMA2软件。
这是从我的设备获取的，使用 HiTool
https://www.mediafire.com/file…age_Hitool_Image.zip/file
我有一个软件更新.zip Android 8 + ENIGMA2
和软件更新.zip Android 7...当我有时间的时候，我会搜索它们并上传给你。
The upgrade process for Dinobot machines is very complicated. I have learned the simple USB upgrade method, but I still cannot use the Hitool tool to upgrade. It is said that this requires some upgrade files, which are difficult to find, and the upgrade operation method is very complicated. Anyway, I still thank you. I finally found the firmware for dinobot4k+elite here! This is a remarkable event.
-
Display More
No, there is an Android 8 + ENIGMA2 software.
This is from my device, Using HiTool
https://www.mediafire.com/file…age_Hitool_Image.zip/file
And I have a software update. zip Android 8 + ENIGMA2
And software update. zip Android 7 ... When I have time, I will search for them and upload them for you.
Do I have to use the Hitool tool to flash this? Or do we just need to rename it as update.rip and upgrade it with USB?
-
Display More
不，有一个Android 8 + ENIGMA2软件。
这是从我的设备获取的，使用 HiTool
https://www.mediafire.com/file…age_Hitool_Image.zip/file
我有一个软件更新.zip Android 8 + ENIGMA2
和软件更新.zip Android 7...当我有时间的时候，我会搜索它们并上传给你。
Are you sure this is for dinobot4k+elite use? If so, thank you so much. I think this is the only version in the world!!
-
Hello everyone, you must have various models of dinosaur robots on hand, but does anyone have this dinosaur robot? By the way, its name is dinobot4K+elite, and it uses the e2 firmware called dinobot4kpro, model U54. Simply put, this machine is an upgraded version of Dinobot4k+, except for the tuner being upgraded to DVB-S2X. The other hardware structures are the same as Dinobot4k+. I think this model is the least popular machine in the Dinobot family because since its appearance, it has been an abandoned child and there is no website to find any Android firmware (update. zip) about this machine. Since I bought this machine, there has been no firmware update information because there is no firmware for this machine on the network. I just want to ask everyone here, is this machine really not updated? Is there no available update.zip file?6666.jpg
-
This skin is very luxurious, and the only regret is that it is very slow. Although I really like it, I have to give up on it
-
I have noticed an issue: I edited some information on OSD, and restarting the GUI can display the changes I made. But if I press the green button to save, it will automatically restart, the skin will return to its initial state, and all the modifications I made will disappear. You know, it took me a long time to make the changes, but in the end, I couldn't save them. I am very regretful.
-
May I ask: How does this skin open the second information bar? Pressing any keyboard will not work. My firmware is openATV7.4
