Posts by DCDi

Quote from toysoft

Quote from DCDi

original dmm image in flash.

barry allen v12.91

original dm920uhd

the image installs fine but everything freezes at boot point.

every single other img installs and boots just fine.

Merlin,Newnigma,Openatv,Blackhole,Pure2...

They all work fine.

The last openpli that works is v8.1.

version 8.x star installs and boots but crashes when going into tuner menu.

Display More

You need to use the 8.x into Flash and not external flash.

TS

Display More

Thanks but no thanks.

Will NEVER install unknown honebuild images in flash and fry the flash chip forever!

Quote from hecha71

Quote from disa51

I had to put the Merlin 4 image

friend, install the module in the image that is installed in the receiver's flash memory and on which the Barry Allen plugin is installed, where when using an Alliance-based python3 image in the Barry Allen plugin, when after installing them they hang at startup.

All images based on dreams are installed and start in the Barry Aallen plugin normally.

at the moment there was a solution - the image of Merlin 4, at the moment there was a solution why the images did not want to run after they were installed in Barry Allen.This is the absence of the core-module-nfsd in the image installed in the flash memory of the receiver in my case it is http://www.dreamboxupdate.com/…le/images/dm900/index.php . There is one problematic image that does not want to run in Barry Allen and behaves the same as before ATV 7.1, egami,openfix - OPEN HDF 7.0

Good luck!!

I installed this module on dreamboxupdate stable image in dm920 flash.

But openpli 8.3 still wont boot.

It is supposedly pli 8.3 based on old python v2 not py3!

Older openpli 8.1 boots just fine.

i installed kernel-module-nfsd in original img in flash. But this damn openpli 8.3 still won't boot...

I give up.

original dmm image in flash.

barry allen v12.91

original dm920uhd

the image installs fine but everything freezes at boot point.

every single other img installs and boots just fine.

Merlin,Newnigma,Openatv,Blackhole,Pure2...

They all work fine.

The last openpli that works is v8.1.

version 8.x star installs and boots but crashes when going into tuner menu.

Quote from hecha71

Quote from DCDi

all the older releases are working fine so obviously the uploaded file is incomplete or corrupted!

Well, I showed you a screenshot that the assembly works, you can see that on the dm900, and in the dm900 only through Barry Allen these assemblies can be installed.look for the problem at yourself and not in the assembly

This is the thread about DM920 NOT DM900!!

Thats probably why it wont work on 920.

I tried the 920 openpli img on dm900 and it would not boot. same thing.

wrong image for wrong box.

Im still searching OpenPli 8.3 that actually works on Dm920!

Quote from hecha71

Quote from DCDi

it installs but will not boot. completely useless.

yes well.. maybe you're doing something wrong..everything is installed and working

yes well, do you think this is my first image trying to install on dm920?

i have 7 other images on multiboot and¨they all work fine except this one will not boot after install.

and i WILL NEVER install unknown home builds in flash before trying it first on barry allen multiboot.

all the older releases are working fine so obviously the uploaded file is incomplete or corrupted!

it installs but will not boot. completely useless.

the one from november worked but now download link is dead.

obviously tivusat tiger is gone from oscam for good.

Can somebody send me the new rsa key for the Tivusat 4k grey card please? (183E tiger)

Or the new cwpk and nuid for merlin black card (1856) if known.

Thx.

the keys are where they should be but dark screen since a week ago.

It worked fine before that.

Quote from DCDi

i have a new problem with tivusat black card. (Merlin)

022/09/02 22:57:33 5AAFFFF3 r (reader) tivusat [nagra cak7] card got wrong ECM

2022/09/02 22:57:33 2AC25ABB c (ecm) dreamup (1856@000000/0000/007A/AF:FFBA2F030867D97ADA5CE323893D8F12): not found (67 ms) by tivusat (lg)

EMM-G is coming and updating provider 5411 but not provider 5412 which needs EMM-S.

i have to request reactivation on provider website and then it gets updated via EMM-U.

This wrong ECM message started 3 days ago...

Display More

So no fix for this still? Not working in oscam anymore? (Wrong ECM sent to card)

i have a new problem with tivusat black card. (Merlin)

022/09/02 22:57:33 5AAFFFF3 r (reader) tivusat [nagra cak7] card got wrong ECM

2022/09/02 22:57:33 2AC25ABB c (ecm) dreamup (1856@000000/0000/007A/AF:FFBA2F030867D97ADA5CE323893D8F12): not found (67 ms) by tivusat (lg)

EMM-G is coming and updating provider 5411 but not provider 5412 which needs EMM-S.

i have to request reactivation on provider website and then it gets updated via EMM-U.

This wrong ECM message started 3 days ago...

Quote from samur

Quote from DCDi

I have one more issue.

Newcamd user always gets au turned off.

i never figured out why.

it is cccam client using newcamd protocol.

maybe i should just use oscam.

2022/06/12 23:46:33 0055D504 c (newcamd) client connected to 8400 port

2022/06/12 23:46:33 0055D504 c (client) encrypted newcamd:8400-client 127.0.0.1 granted (myuser, au=on (1 reader))

2022/06/12 23:46:33 0055D504 c (newcamd) user myuser authenticated successfully (CCcam)

2022/06/12 23:46:33 0055D504 c (newcamd) AU disabled for user myuser

Display More

##

DCDi autype is now removed and oscam will automatically send the right type of emm to the server device.

please, change oscam in both sides (server and client) with the updated ones attached here

thanks

;

Display More

UNFORTUNATELY EMM S is not being forwarded to the card or the provider is not sending it. And dark screen.

EMM G are coming just fine.

Card wont update 5412 provider through EMM S.

Is there a fix for this yet??

Thanks

thank you so much fegol. i owe you a big lunch ;-))

adding autype = 1 in the client box fixed the problem.

the EMMs are coming now and the card updated after 2 mins.

2022/06/12 23:40:00 42C9822B r (reader) tivusat [nagra cak7] card has no right to decode this channel

2022/06/12 23:40:00 4F4A72D9 c (ecm) updater (1856@000000/0000/007A/A9:A4468C3CE08B1BDA7551F8AB9CCF55DD): not found (120 ms) by tivusat (lg)

2022/06/12 23:40:00 42C9822B r (reader) tivusat [nagra cak7] updater emmtype=shared, len=139 (hex: 0x8B), cnt=1: written (136 ms)

2022/06/12 23:40:14 4F4A72D9 c (ecm) updater (1856@000000/0000/007A/A9:F8143E61F18199C6411D4D3032F7688C): found (144 ms) by tivusat (lg)

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] ROM: D N A S P 4 5 0

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] REV: R e v W 6 0

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] SER: ###########

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] CAID: 1856

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] Prv.ID: 00 00 54 11 (sysid)

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] -----------------------------------------

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] |id |tier |valid from |valid to |

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] +----+--------+------------+------------+

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] |5411|0000 |1992/01/01 |2022/08/13 |

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] |5412|0000 |1992/01/01 |2022/08/09 |

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] -----------------------------------------

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] Prv.ID: 00 00 00 00

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] Prv.ID: 00 00 54 12

2022/06/12 23:46:27 42C9822B r (reader) tivusat [nagra cak7] ------------------------------------------

I have one more issue.

Newcamd user always gets au turned off.

i never figured out why.

it is cccam client using newcamd protocol.

maybe i should just use oscam.

2022/06/12 23:46:33 0055D504 c (newcamd) client connected to 8400 port

2022/06/12 23:46:33 0055D504 c (client) encrypted newcamd:8400-client 127.0.0.1 granted (myuser, au=on (1 reader))

2022/06/12 23:46:33 0055D504 c (newcamd) user myuser authenticated successfully (CCcam)

2022/06/12 23:46:33 0055D504 c (newcamd) AU disabled for user myuser

Thanks but ti wont work because you put dvbapi user. and i connect from my dreambox to linux pc oscam so that wont work.

i am looking at logs now maybe these emm filters are the problem:

| All EMM FILTERS (5) added successfully |

i dont understand why not one single emm is coming?

i will try with another card tomorrow

# oscam.conf

[global]

usrfile =

logfile = /tmp/osclog.txt

cwlogdir =

emmlogdir = /tmp/emmlog.txt

disablelog = 0

disableuserfile = 1

usrfileflag = 0

clienttimeout = 5000

fallbacktimeout = 2500

clientmaxidle = 120

failbantime = 0

bindwait = 120

netprio = 0

unlockparental = 1

nice = 99

#serialreadertimeout = 1500

maxlogsize = 9999

waitforcards = 1

preferlocalcards = 1

#saveinithistory = 1

readerrestartseconds = 5

resolvegethostbyname = 0

[cccam]

port = 1555

version = 2.3.0

reshare = 3

reshare_mode = 1

[reader]

label = tivusat

enable = 1

device = /dev/ttyUSB0

protocol = mouse

detect = cd

mhz = 368

cardmhz = 368

caid = 183D,183E,1856

rsakey = ...

mod1 = ...

key3588 = ...

data50 = ...

mod50 = ...

idird = ...

detect_seca_nagra_tunneled_card= 0

detect = cd

autospeed = 0

ident = 183D:000000,005411;183E:000000,005411;1856:000000,005411,005412

group = 1,2,3

emmcache = 1,1,2,0

evensa = 1

#forceemmg = 1

blockemm-g = 0

blockemm-s = 0

blockemm-u = 0

blockemm-unknown = 1

auprovid = 000000,005411,005412

audisabled = 0

nagra_read = 2

read_old_classes = 0

# oscam.user

[account]

user = updater

pwd = mypass

uniq = 0

group = 1

caid = 1856

ident = 1856:000000,005411,005412

au = tivusat

keepalive = 1

cccmaxhops =

cccreshare =

Many thanks for your patience :-)

183E Tiger card used to update just fine witht this config.

Thank you so much for your help.

I need the i686 version to read the card. (linux pc) using a USB phoenix cardreader.

I installed the latest version i could find v11711 just oscam not with emu but did not work.

Tried also.

evensa = 1 and also -1 but no luck.

here is the log:

2022/06/11 23:22:24 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11711 (i686-linux-gnu)

2022/06/11 23:22:24 00000000 s (main) System name = Linux

2022/06/11 23:22:24 00000000 s (main) Release = 3.2.0-4-686-pae

2022/06/11 23:22:24 00000000 s (main) Version = #1 SMP Debian 3.2.51-1

2022/06/11 23:22:24 00000000 s (main) Machine = i686

2022/06/11 23:22:24 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2507

2022/06/11 23:22:24 00000000 s (config) services reloaded: 0 services freed, 57 services loaded, rejected 0

2022/06/11 23:22:24 00000000 s (config) userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled

2022/06/11 23:22:24 00000000 s (main) signal handling initialized

2022/06/11 23:22:24 00000000 s (config) 1147 service-id's loaded in 7 ms2022/06/11 23:22:24 00000000 s (net) cccam: initialized (fd=6, port=1555)

2022/06/11 23:22:24 00000000 s (reader) tivusat [mouse] creating thread for device /dev/ttyUSB0

2022/06/11 23:22:24 00000000 s (main) waiting for local card init2022/06/11 23:22:25 16F1EFC0 r (reader) tivusat [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)

2022/06/11 23:22:25 16F1EFC0 r (reader) tivusat [mouse] card detected

2022/06/11 23:22:27 16F1EFC0 r (reader) tivusat [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 35 30 20 52 65 76 57 36 30 14

2022/06/11 23:22:27 16F1EFC0 r (reader) tivusat [mouse] Setting baudrate to 115200 bps

2022/06/11 23:22:27 16F1EFC0 r (reader) tivusat [mouse] detected card in CAK7 mode

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [mouse] Rom revision: DNASP450 RevW60

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [mouse] card needs restart after 36863 CMDs

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [mouse] Card is starting in GLOBAL mode

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [mouse] ready for requests

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [mouse] found card system nagra cak7

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] ROM: D N A S P 4 5 0

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] REV: R e v W 6 0

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] SER: ###########

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] CAID: 1856

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] Prv.ID: 00 00 54 11 (sysid)

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] -----------------------------------------

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] |id |tier |valid from |valid to |

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] +----+--------+------------+------------+

2022/06/11 23:22:28 16F1EFC0 r (reader) tivusat [nagra cak7] |5411|0000 |1992/01/01 |2022/06/19 |

2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] |5412|0000 |1992/01/01 |2022/06/10 |

2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] -----------------------------------------

2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] Prv.ID: 00 00 00 00

2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] Prv.ID: 00 00 54 12

2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] ------------------------------------------

2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] | All EMM FILTERS (5) added successfully |

2022/06/11 23:22:29 16F1EFC0 r (reader) tivusat [nagra cak7] ------------------------------------------

2022/06/11 23:22:29 00000000 s (main) init for all local cards done

Hello i need help.

My Tivusat card 1856 nagra merlin stopped working.

it wont update in oscam.

i Connected oscam client with cccam protocol to oscam 11711 who is reading the card.

But it is not receiving any emms at all.

card is inited fine just wont update.

will not install on multiboot with barry allen. old version september 2020 works fine.

LAN not working!

sadly it keeps crashing on openpli 7.3