1. Yes
2. Only Flash Backup Images
Posts by adrianosro73
-
-
This is how I did it:
1. Send the ciefpsettings channel list in receiver
2. Install astra-sm by telnet:
opkg update
opkg install astra-sm
Reboot
3. Put the file "abertis" in /etc / astra / script. Give permissions 755
4. Put the astra.conf file in /etc / astra. Give permissions 755
5. Put the sysctl.conf file in /etc. Give permissions 755
6. Put the file softcamkey correct in receiver
Reboot
-
Contact me privately and I'll send you a backup for octagon sf8008.
-
The problem with libacodec.so has been solved, it must be replaced with this one and restarted. It is also needed for other applications.
-
It only works on images with python 3.12, for example OpenATV 7.4. The best solution is to install OpenATV 7.4, in vain you ask for versions for other images, Ziko said it will provide support from 3.12 and up.
-
I installed on Openatv 7.4, I also had to install the E2iPlayer plugin. Runs great. Is it possible to add the possibility of downloading the subtitles and the Vod entry, just like in the TV show? Thank you
-
-
With ciefp's settings it didn't work for me either, the channels appeared in the list but there was no signal, no image. After manual scanning it was solved. Try the settings I sent. If it does not work, either the tuner cannot decode the t2mi signal or the image does not support t2mi.
-
This means that there is no option to scan T2MI. I scanned on the Octagon SF8008.
-
In the manual scan menu, set User defined transponder instead of Predefined transponder
-
Manually scan frequency dvb-s2 11444/H/17500/8PSK, T2MI PLP activated, T2MI PLP ID=0, T2MI PID=0.
-
The discussion is about satellite dab, not terrestrial dab.
-
Yes, everything works fine, both the dab and dab+ channels.
-
It also works on other receivers with enigma2, not only on the Octagon SF8008.
1. Install the necessary tools for decapsulating and playing the signal, in the order described in info.
2. Transfer with dreamboxedit the list of programs that also contains the dab channels from 10e, 9e and 5w
3. Depending on the image or some updates, if on some channels
(eg HeartUK at 9e, dab+) the sound is muffled, delete from usr/lib
the file libavcodec.so.60.31..., has approx. 10 megabytes.
4. Restart
Tests performed with Openatv, Pure2, Egami with Phyton3...
-
[reader]
label = TVR-Freesat-Conax
enable = 1
protocol = internal
device = /dev/sci0
pincode = 1234
lb_whitelist_services = freesatconax
caid = 0B02
ecmwhitelist = 67
detect = cd
ident = 0B02:000000
group = 2
emmcache = 2,2,2,1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
With these settings it works for me.
