Posts by mayday10

Quote from ian1095

You do realise that the plugin has an option to save existing channels lists dont you ?

If you dont select this in the settings before running the plugin you will lose all existing channel lists.

Thank you for your comprehensive comment. As I really have no clue about this option of this plugin to save an existing channel list. And nobody told me about it before in this thread.

So that's a pity that I lost my Vhannibal motor satellite settings.

How can I save an existing channel list in this plugin? Are there any possibility to save and use again with future settings Sky Germany bouquet in favorites? Thanks a lot

Quote from abu baniaz

Then it looks the script has left itself on the receiver and runs after a restart.

Stop wasting your time. Flash the image again.

I'll go for it right away with the latest image edition. Thank you dear!

Quote from cosy

abu baniaz

don't you think you are wasting your precious time?

I have followed the member's argument or description of the issue, but he doesn't know what you are telling him

I understand everything pretty well, thank you! The only issue is that I was given so many contradictory advices regarding my STB's case at the same time. And finally, I applied all of them simultaneously, unfortunately.

Quote from abu baniaz

Have you tried re-installing the channel list after the script?

As I said, if it doesn't work. Flash image again.

Yes, I tried to re-install Vhannibal motor satellite list from OBH feed. It installs pretty good, but after STB's rebooting the list goes away because of the script settings, to my mind. So it would be a better idea to reflash the image with its the latest updates. Thank you!

Quote from abu baniaz

There is no script on the receiver, (I hope). When you run the script it did its work and that's it.

The satellites.xml has been replaced with a shortened one, this is why you cannot scan other satellites. Check the scanning menu and see if there is an xml update. If teher isnt' install it from the plugin menu and run(use) it. It will download the latest satellites.xml file and restart your receiver. You should be able to scan other satellites then.

Install the channel list like you did before. Menu , Plugins, Green for download, settings, select the one you want.

How to remove all the settings that were installed by this bloody script? In order to avoid conflicts with satellite list settings? Because for example, I install a Vhannibal satellite list from OBH feed and after STB's rebooting it would disappear again, as I know from my previous experience.

Quote from Panda555

That is why I asked if you were left with a channel list in etc/enigma2 with a user bouquet of the Vhannibal list. With the installation of this script, you installed what it has in it (oscam, satellite.xml, bouquets only for Astra and Hotbird, lamedb and Whitelist_streamrelay). The Vhannibal list has a variety of userbouquetse, so the script may have been 'overwritting' them. I don't know what userbouquet you have for satellites because I don't use them Vhannibal . Channels from various satellites that are interesting to me all are in my Favorite userbouquet. You should have saved somewhere on the PC your channel list before installing this script if something goes wrong.Copy again whole Vhannibal list in your STB and delete Astra and Hotbird bouquets if you still have in etc/enigma2 from new script.

How can I remove this script from my receiver?

When I choose any Sky Germany channel from Astra 19.2E satellite list and select EPG crashlogs appear again! Congratulations!

I took a brandnew satellite.xml file from here https://www.linuxsat-support.c…-satellites-xml/#versions and put and substitute through DCC etc/tuxbox and after my STB rebooting there are just 2 bloody satellites in satellite list: Hotbird and Astra.

So everything remains the same for me, unfortunately...

What further steps should I take with it? Any ideas?

Quote from Panda555

This script only installs the Astra and Hotbird bouquets. Because of this, the other bouquets and satellites that you had in the Vhannibal list have 'disappeared'. Look in etc /enigma2 which bouquets you now have. Now you will have to reconfigure the Vhannibal list and scan for satellites that you do not have now. You should not have installed this script if you did not know what it is for.

Quote

https://i.tv-lounge.eu/install_v3.txt

Well, the script is really good one indeed, but only for 2 popular satellites. But Sedutor, who gave me a link for this script in the thread didn't explain how to use it at all. Also how to remove correctly this script from my STB?

How can I reconfigure Vhannibal list and scan for another European satellites? Are there any ready good quality satellite list settings for all European satellites with picons in it?

Afterwards I want to try to launch Sky Germany channels with a Streamrelay option, as Abu Baniaz has mentioned earlier before.

Quote from abu baniaz

If you cannot re-install your channel list from plugin menu, I think the easiest thing to do is to flash image and restore settings/plugins afterwards.

What kind of plugin to re-install my channel list are you talking about? I don't get it, sorry.

Quote from abu baniaz

I will repeat what I said before. Keep things simple, do one thing at a time.

For now, try to re-install your channel list again.

After that, do what I said before.

Open your channel list (not grid EPG or any other EPG screen), select the channel you want to use steam relay and mark it as "play with stream relay" .

play with stream relay.jpg

Display More

Dear Abu Baniaz,

Thank you for your clarification once again, as it is really appreciated indeed!

Firstly, how to remove this bloody plugin wget -qO- i.tv-lounge.eu/install_v3.txt | bash ?

Secondly, what is the best way to re-install my channel list? I want to have all European satellites on it with all accessible packages channel picons. As far as I know there should be a special plugin to be used for all channel picons.

FYI all Sky Germany channels from Astra 19.2E satellite when I press menu button - they are alrerady set to play with Streamrelay mode. Cheers!

Quote from abu baniaz

You are doing multiple things together. Pick one thing/advice you want to follow and we will help you do it.

1. When I have installed this plugin wget -qO- i.tv-lounge.eu/install_v3.txt | bash that has been provided by Sedutor Sky Germany channels appeared in favourites menu in user bouquets with stable EPG and picons for all Sky Germany channels and work quite smoothly.

2. Before I installed the latest Vhannibal motor settings from Open Black Hole feed. After wget -qO- i.tv-lounge.eu/install_v3.txt | bash installation and receiver's rebooting - all satellites disappear (excepting Hotbird and Astra). So what is wrong with it?

Many thanks in advance!

Quote from Hannibal_Lecter

Did you do a channel search after installing the settings?

If not, do that, reboot, and the programs will be back.

Do you mean a manual channel search for all satellites? Are you seriuos? I have installed Vhannibal motor settings for all satellites and when I have used this plugin all satellite list has gone away, unfortunately. In the list just 2 remained Hotbird 13E and Astra 19.2E What is wrong this this plugin?

Hello dear all, I'm back on track once again, but still quite busy with different stuff(((

I put whitelist_streamrelay file by Panda555 through DCC. Also I used a plugin wget -qO- i.tv-lounge.eu/install_v3.txt | bash that was provided by Sedutor at the same time.

Sky Germany works in more stable manner without any EPG crashlogs when I use a Sky Germany channel list from favourites - Sky Film icam Astra.

I'm awfully sorry for my offtop - but I faced another issue while using this plugin wget -qO- i.tv-lounge.eu/install_v3.txt | bash all satellite list has been removed from my STB's satellite list just 2 remained accordingly to this plugin: Hotbird 13E and Astra 19.2E. And to my mind there is a conflict of this plugin with a satellite list at my receiver.

Are there any concise advice how to use this plugin without any removal from a satellite list?

Quote from abu baniaz

How did you get on mayday10

Hello,

I'm so sorry for my late reply. I went away to a countryside and physically have no access to my receiver to finalise my Sky De bouquet adjustment.

I'll get back to you quite soon

Many thanks for your assistance and support xxx

Quote from Panda555

Old streamrelay user bouquet is outdated. All newer images now use whitelist_streamrelay. Maybe is old user bouquet

which you use reason for your issue .

How to remove old user bouquets. And how to check out whether whitelist_streamrelay is available in my STB's setting? Thanks a lot

Quote from abu baniaz

For now, go to the service list, orbital, 19.2, copy three sky de channels into a new bouquet. Favourites is fine. In the service list, press menu on those three channels and ensure that they are marked to play with stream relay.

In the channel selection screen, press blue for favourite, select the bouquet with those 3 channels.

Try and repeat the crash. (Do not select the stream relay bouquets)

Well, when I use blue button for Sky De favourites it is peculiar that EPG works without any crashes for all Sky De channels that I have zapped.

Quote from abu baniaz

He is not answering questions. This is very unhelpful.

I asked if he is using streamrelay bouquets, he did not respond.

Yes, I'm using streamrelay bouquets for SKY De Icam. I'm awfully sorry for my late reply.

Quote from ian1095

I've told you what to do, delete the EPG.dat then obtain EPG from the satellite by simply zapping through a few of the channels.

Then check to see if the crash has gone. However, because the EPG.dat is a protected file you have to first stop enigma2 by issuing init 4, then delete the EPG.dat, then issue init 3 to restart enigma2 again.

I've done everything as you told me before and deleted EPG.dat, but crashlogs still exist for Sky De

Could you please verify it once again?

Quote from ian1095

Wherever youve set it to be within your image EPG settings.

Only you know this.

Shall I delete EPG.dat file from my FTP path /etc/enigma2?

I've found this file over there in my STB

Quote from ian1095

I've told you what to do, delete the EPG.dat then obtain EPG from the satellite by simply zapping through a few of the channels.

Then check to see if the crash has gone. However, because the EPG.dat is a protected file you have to first stop enigma2 by issuing init 4, then delete the EPG.dat, then issue init 3 to restart enigma2 again.

What is the path to EPG.dat via Telnet in order to access it? Thanks dear

Quote from abu baniaz

It is another plugin for getting EPG. Installing another version of the plugin will complicate things.

Should I install this plugin to my STB?

How resolve my issue with these EPG crashing? Thank you dear xxx