Hello, so if I flash this image, and then install the .IPK file you attached (trialtuner20b_dm800sev2_sr4_oe2.ipk), this image will work OK with sunray SR4 trialtuner (tripple tuner) ? Thanks.
BTW: I have only sim 2.1 I think , I am not sure. Currently I use this image (Backup-luigi86-OpenPLi-4.0-beta-dm800se-trialtuner-sim2-20170212.nfi) .
Is there any newer image I can use with this receiver? Thank you.
Display MoreDisplay MoreHello
The tripple tuner is basically a satellite tuner with capabilities to also receive cable and terrestrial. It can work like a dvb-c, dvb-s or dvb-t tuner, but only one of those at a time.
You set it up like a satellite tuner but due to some settings in the satellites.xml you can make it switch to other modes. Yes you read it well, all settings are done in satellites.xml, no need for cables.xml or terrestrial.xml.
It switches to cable mode if the frequency starts with 01 and inversion="0", it switches to terrestrial mode if the frequency starts with 01 and inversion="1"
In dvb-c mode: fec_inner="0" is qam64 and fec_inner="5" qam256.
This all is managed by the satellites.xml. You need to make a custom satellites.xml which include all transportstream frequencies, qam values and symbolrates of your cable provider beside the already existing satellite lines. Put your custom satellites.xml in /etc/enigma2/satellites.xml, this will overrule all other satellites.xml files and it won't get overwritten by software updates.
After you created the satellites.xml you also need to configure a additional tuner.
Now for the T2 part, I think some setting like above is required to put the tuner in T2 mode. Your tripple tuner model should be SR4T ,not SR4A ~ SR4F.
I expect the trialtuner package would not work with new T2 tuner as well. I think it's also no longer maintained.
When you use OpenPli and configure your tuner like this, it should work.
Don't use the Trialtuner Sr4 driver (doesn't work with PLi).
/etc/tuxbox/satellites.xml
Well, it doesn’t work like that.
Can you take a look in my satellites.xml to see if there is something wrong?
I used the default setting and I added another one from a file that had my country settings for trialtuner. I edited the file except the frequency but doesn't work with either setting selected. When I try to search for channels it completes immediately and says 0 channels.
I made a full backup with backup suite and proceed in installing trialtuner. It worked flawlessly this time and searches all channels.
Thanks a lot, even if it didn’t work that way.I'll leave the trialtuner ipk that works, if someone wants it. Its for Sunray4 HD v2 clone reciever that is equal to DM800HDSE V2, with triple tuner.
