Posts by electron112

Quote from .atari.

1c87766949ea.jpgWhy using dflash ? for backup and flash it is in PurE2 image included very easy PManager

can not see dflash on feed use plugin frome feed and all is fine gorski say it !

i think no understand im using pure2 in flash on dreambox 7020hd and always it returned this after update / upgrade or install somethink

Collected errors:

* pkg_run_script: package "enigma2-plugin-extensions-dflash" postinst script r

turned status 1.

* opkg_configure: enigma2-plugin-extensions-dflash.postinst returned 1.

root@dm7020hd:~#

Quote from lv10

Quote from nagra

Quote from lv10

anybody have aes for bistv pc6 0500:042820?

thanks

you can try pubilc key for compare , if not work need get private key with oscam

after 24h card stop working with public aeskey 042820 - (key to use is not the curr)

card dead by public key

when does that appear? Did you notice any problems? Sometimes there are mistakes when installing a plugin etc. but it is inconsequential...

yes but i have this problem with all revision im tryed to find problem on dflash but with no success

hi all im use pure E2 6.3 on dreambox 7020 hd ( v1 )

i have this problem

* pkg_run_script: package "enigma2-plugin-extensions-dflash" postinst script r

urned status 1.

* opkg_configure: enigma2-plugin-extensions-dflash.postinst returned 1.

any issue ?

thanks

v6 working fine you need

boxkey = XXXXXXXXXXXXXXXXXXXXXX

deskey = XXXXXXXXXXXXXXXXXX

working with only use private key

public keys kill your card

in this way you can t

season interface / box / computer you can

wat s your card ??

salut tu na pas besoin de mettre une carte tnt il gere les softcams

dont use the AU with your peers

you share your serials number and it s dangerous ( do not share your ua )

if vdr with dvbapi is not run it s normally you have this error in your log

oscam search dvbapi from system and not found

the dvbpi of oscam is for linux box E2 ect .... or vdr-plugin with dvbapi

it s simple to configure smartmouse

in console in root user write

lsusb -s

linux say " Bus 003 Device 003: ID 104f:0002 WB Electronics Smartmouse "

modprobe -r ftdi_sio
modprobe ftdi_sio vendor=0x104f product=0x0002

ls -al /dev/ttyUSB*

response from terminal
crw-rw----1 root uucp 188, 0 2008-05-08 10:59 /dev/ttyUSB0
crw-rw----1 root uucp 188, 1 2008-05-08 10:59 /dev/ttyUSB1

cat /proc/devices | grep -i "ttyUSB"
response from terminal
188 ttyUSB

cat /proc/tty/driver/usbserial

0: module:ftdi_sio name:"FTDI USB Serial Device" vendor:0c52 product:2101 num_ports:1
port:1 path:usb-0000:00:1d.1-1.2
1: module:ftdi_sio name:"FTDI USB Serial Device" vendor:0c52 product:e402 num_ports:1
port:1 path:usb-0000:00:1d.1-1.4

mknod /dev/ttyUSB0 c 188 0
mknod /dev/ttyUSB1 c 188 1

ls -al /dev/ttyUSB*
chmod 777 /dev/ttyUSB*

reboot your oscam or cccam

note

n this method is valid each redemarage sessions each machine you must repeat the manipulation al hour or day write these lines I am looking to automate the task for that it is recognized demarages