Posts by satboxes.com

connect the wifi bridge to your pc/laptop by usb and ethernet
run the setup program on the supplied cd
it should find the wifi bridge so its just a case of pressing next until the screen which asks for your network key
do not make one uo, you must enter the correct key for your broadband setup, quite often this is printed on a sticker under your broadband router
if you get both the orange power light and the blue data light on then all should be well
also ensure that DHCP is set to ON in the network settings of your Openbox

would totally disagree that Ferrari sim is better, less support than Sim 2.10 and from what I have seen of boxes sent to me for repair from customers who bought the Ferrari Sim model elsewhere they are not reliable at all

the Uno is a strangely priced box from VU+ as it is only single tuner and for the extra few quid you would be better off going for the Duo in the long term as you can always add on second cable etc

patch the receiver with latest patch
then go to Tools menu
Network Local settings
you will see you now have a new option on red button
have fun :)

unzip it and place the TP_PROG.dbs file onto your usb stick
in the S9 menu choose Upgrade by USB
Press right arrow to change Image Files to Misc Files
Press down arrow to go down to the option "Select & Upgrade" , press OK button
Choose TP_PROG.dbs from the list, press OK, this place a tick mark beside the TP_PROG.dbs file
Then press Yellow button to upgrade
When complete, exit the menu and reboot the S9 for the changes to take effect

no need to do any scans, that will only add unwanted channels to the S9

hi
i can sell you an ex-demo model if you want, pm me :)

remove the lnb cable, turn on the box, press menu, then choose tv channel list, then delete the current channel by pressing the blue edit button, then blue button again for delete, then press ok which places an x beside the offending channel, then press exit twice and then yes when prompted to save... box should be ok now