i have a line of code for update.sh file
echo "--> Checking for latest version and create oscam dir..."
sudo svn co http://www.streamboard.tv/svn/oscam/trunk oscam-svn
echo " [ OK ] "
should it now be ?
echo "--> Checking for latest version and create oscam dir..."
sudo svn co https://git.streamboard.tv/common/oscam.git oscam-git
echo " [ OK ] "
can some tell me the new path to oscam trunk
the old is
http://www.streamboard.tv/svn/oscam/trunk oscam-svn
this not working any more
what is the new path?
anyone help me please?
What would you need special bouquets for? If the patched files work, the Icam channels will open... You won't be using streamrelay...
yes your correct , anyway i have the patched oscam for dvbviewer working well. thanks for your direction
found it and understand it but theres no support for special bouquets
I hear that in other german forums someone has patched both to make it work with Dvbviewer, dunno if that's true.
can you post a link to the forums so i can read
Normal Dvbapinet and ffdecsa won't open Icam channels. There is no use for channel bouquets in Dvbviewer.
so is it pointless pursuing this configuration ???
it will never work without a set top box??
help needed with oscam icam client/server version OSCam-11713-798 (Ubuntu x86_64)
i do not use a receiver .
i use oscam ubuntu server virtual machine with dvbviewer on pc with dvbapiNET in plugins
where do i put the channel bouquet files to allow dvbviewer to open the correct icam channel
Display MoreHi master G
I assumed that you and the rest of the team where very busy and well done for all your hard work getting this great forum back up and running. I will explain now how I got it working in the end. I formatted with a fresh install of ubuntu 10.10 and I did use the CCcam/Oscam auto install file. It installed with no problems whatsoever and ran very well. I decided I wanted to install the Oscam Auto Update script as I wanted to use the latest build and after following the instructions I could not get it to run as it should. However I searched high and low for reasons why it wouldn't run properly and I came up with this bit of info. When you install a fresh Ubuntu op system it doesn't for whatever reason even after updating it fully install all the applications you need to build the files, directory's etc u need to run the script. You have to install them yourself. Here is the list I had to install before it would run. (These words are not mine I found them elsewhere but they worked for me)
This is a little howto for compiling oscam on some linux computers (debian, ubuntu, ...)
you need these prerequisites before starting (they can be installed with this command sudo apt-get install <package_name> or with synaptic) :
build-essential
g++
libssl-dev
libusb-1.0-0-dev
libpcsclite-dev
cmake
sample : sudo apt-get install libssl-dev
After I had installed these I followed the instructions at the start of this thread.
sudo mkdir /var/local/bin/
I then did
sudo nano /var/local/bin/oscam_update.sh
I then went to the above file and inserted the following content bellow. (The only thing I changed was the http address it go's to for the latest oscam version)
###### #### ##### ##### ### ###
## ## ## ## ## ## ## ## ##
## ## ##### ## ####### ## ## ##
## ## ## ## ## ## ## ##
###### #### ##### ## ## ## ## R
####################################################################
# 18 Jan 2011
# By: billyk
# Description: Automaticaly check and update to latest oscam version
# Also restars it after update
####################################################################
# - You can modify it to fit your needs :)
# - Add # infront of any line that you don't want to execute
####################################################################
echo "--> 1rst go to oscam's dir"
cd /usr/local/bin
echo " [ OK ] "
echo "--> Backup previus version"
#you must create a folder named: oscam_backups under /usr/local/bin
sudo mv ./oscam ./oscam_backups/oscam_$(date +%m-%d-%Y-%H:%M)
echo " [ OK ] "
echo "--> Let's remove old folder..."
sudo rm -rf oscam-svn
echo " [ OK ] "
echo "--> Checking for latest version and create oscam-svn dir..."
sudo svn co http://streamboard.gmc.to/svn/oscam/trunk oscam-svn
echo " [ OK ] "
echo "--> Change dir to: oscam-svn"
cd oscam-svn/
echo " [ OK ] "
echo "--> Create new folder: build_dir"
sudo mkdir build_dir
echo " [ OK ] "
echo "Change dir to: build_dir"
cd build_dir
echo " [ OK ] "
echo "--> Compile new version with Smargo smartreader support"
sudo cmake -DHAVE_LIBUSB=1 /usr/local/bin/oscam-svn
# You must have the needed libs to run smartreader with oscam.
# If you do not want smartreader support...
# ...simply remove [-DHAVE_LIBUSB=1]
# so you will have this line:
# sudo cmake /usr/local/bin/oscam-svn
echo " [ OK ] "
echo "--> Now... make!"
sudo make
echo " [ OK ] "
echo "--> Finally we install the latest fersion..."
sudo make install
echo " [ OK ] "
echo "---> ...so it's time to clean..."
sudo make clean
echo "OK. Now you have the latest oscam version!"
#########################################################################
# Also you can stop and start oscam from this script
# The only thing you have to do is to remove the # from following lines...
##########################################################################
if ps x |grep -v grep |grep -c oscam >/dev/null
then
echo "Oscam is running so we will stop it & restart it"
sudo killall -9 oscam
echo "Oscam killed"
sleep 1
echo "...so going to start it"
sudo /usr/local/bin/oscam -b &
echo "Done. Oscam is running!"
echo "If oscam's settings are OK, you will have picture at 5 to 10 seconds!"
echo "Chears! :)"
else
echo "Starting oscam..."
sudo /usr/local/bin/oscam -b &
fi
##########################################################################
I then went to /usr/local/bin and created a folder called oscam_backups
I then used the command
sudo chmod 755 /var/local/bin/oscam_update.sh
Then I ran it using the command
sudo /var/local/bin/oscam_update.sh
It ran removed the old oscam, placed it in the oscam_backups folder and then placed the latest version of oscam with Smartreader support in it's place and restarted everything.
Hope this helps someone out
Regards
i have used this scrip to auto update oscam.. and is working well .....does anyone know how to include icam into this script so that it build oscam with icam emu
does anyone know how to get icam working with this set up
can someone help me with icam on version of oscam for Ubuntu 20.04.
how to do it ?
is there any way to get icam working with oscam linux pc and dvbviewer
please
can anyone help with this answer. i have been on my roof so many times, questioning my installation. my conclusion is
1. theres fucxk all wrong with my installation
2. fox news channel signal is being suppressed on the transponder by the powers that rigged that election .
prove me wrong
i looking for instructions on how to apply the patch to ubuntu server.
anyone ?
can someone please state where the icam patch is for oscam 11714 ubuntu server is please
Vanilla OSCAM works with DVBAPI
can you give more details and direction please
can someone please state where the icam patch is for oscam 11714 ubuntu server is please
do you have patch so that i can test it please, or a link to where i can find it please
AFIK it is not public
but others have posted segments of a patch further up in this thread..... (untested by me looks incomplete anyways)
as i have said before i have little interest in sly DE, i was only interesting in how it worked.
yes me too, only interested in trying to make it work
Display MoreDisplay Morehi, can someone explain. all this talk about i-cam and slyde. i have ubuntu oscam 11712.
Is slyde working with 11722 and if so, can some one explain how to get it working?
many thanks
my understanding is 11712 works as a server, if you have a real local card and a k1 key for your card.
otherwise you need 11711 and the icam patch as only a client.
i have 2 virtual machine with ubuntu server .........1st with 11711 and 2nd with 11712 . however i am not a server ,only a client ... is there any point to the icam patch for my 11711 if I'm only a client..
icam patch is only for sly Germany for now, and it only works on 11711 if you are a client. at least as far as i am aware.
do you have patch so that i can test it please, or a link to where i can find it please
hi, can someone explain. all this talk about i-cam and slyde. i have ubuntu oscam 11712.
Is slyde working with 11722 and if so, can some one explain how to get it working?
many thanks
my understanding is 11712 works as a server, if you have a real local card and a k1 key for your card.
otherwise you need 11711 and the icam patch as only a client.
i have 2 virtual machine with ubuntu server .........1st with 11711 and 2nd with 11712 . however i am not a server ,only a client ... is there any point to the icam patch for my 11711 if I'm only a client..
hi, can someone explain. all this talk about i-cam and slyde. i have ubuntu oscam 11712.
Is slyde working with 11722 and if so, can some one explain how to get it working?
many thanks
i have it working but can you please tell me why it skipped "working c complier" and can not find "libusb-1.0/libusb.h"
