Whats ment with "crap"? Its to easy to say....
Gesendet von meinem SM-G900F mit Tapatalk
Whats ment with "crap"? Its to easy to say....
Gesendet von meinem SM-G900F mit Tapatalk
Are there any sofcam available for wetek plus openatv.
And how to get e2 bouquets on wetek plus. Tried with satchannel editor which is not working
Gesendet von meinem SM-G900F mit Tapatalk
I hope too!
I have the Bouquets because its easier to handle but inside the sorting is a mess e.g. sky bundesliga starts with 3 5 7 1 so i want not even an easy way but a way to sortthe channels like it is in e2
- - - Updated - - -
Does anyone has an idea?
Moin,
settings working fine but....
How to get the correct position of Bouquiets and channels.
It will not be transfered like it is in the E2 settings.
How to rework best or is it an defect of e22tvh tool that the Bouquets and Channels will not imported correct?
Any help is appreciated
Hi all,
I have cs running with x boxes and all went fine only the wetek makes trouble.
- its not wetek its more my experiences as I do not know how to configure TVheadend when using cs378x protocol. Only found intructions for newcamd.
Does anybody can help what to set if I want to setup Wetek Play Tvheadend as client for an Oscam ubuntu server?
Thank you
May anyone can help?
jepp sure but need satchannel editor as I have sh4 an mipsel boxes so its easier to use in that case
so now going further with tvheadend and oscam ....but thats another thread ;-)
thank you
But you know which is default format of a E" list which can be correct converted into wetek format.
If you see my e2 list what is different to the ones you had for conversion.
The only file e22tvh let me choose is lamedb so the rest must be refered from that file.
Can you help finding out what prevent me to use the e2 list I sent you?
thank you
- - - Updated - - -
it works after loading the e2 settings into dreamset editor and another save as. Now it will be converted correct via e22tvh.
seams that satchanneleditor uses E2 format but not the same needed for e22tvh.
Snifferdsx thank you for the support - you made my day.
ok tried again and now the default 13.0 and 19.2 list works
can you see what is missing and maybe why
can I modify so my bouquets are used
It would be okqy if ther is a way to convert only the bouquets into wetek format so they can be copied
OpenELEC:~/.kodi/userdata/addon_data/service.multimedia.tvheadend # ls
accesscontrol config epggrab service.log xmltv
bouquet dvr input settings.xml
cache epgdb.v2 profile timeshift
no channel map
input/dvb is empty
bouquets
OpenELEC:~/.kodi/userdata/addon_data/service.multimedia.tvheadend/bouquet # ls
08afd2c45615abe75725fbaff7f432ea 639c36a2d8414d79eea40882cc6e5c01
20557b7b67fd11a316094397b13940d5 64e142541eb33f36d21a76a6dabff46a
2a89be69c6a73f0ca7a91f7d72769aa1 88f5ea27d80a8b3983e6f295baab0785
38a4a0acb61d14705e10da95ea33fd50 9d9c714d27fe6d12e03b2ca52019a7a3
47acd7f810711ebe86f0a667c07f9a99 ac21056d04251454bc644bcaca1b8603
496045ecdf0142ed300c65d7dfb4f042 dbbe6c9dba7403b3d0d48b47cf2a07ae
62181fd64f6e9ba0962f9aee5d3e0ca7 e8e7dc1d2a78f89e7fd73dd9b8432c13
so only the bouquets will betransfered no channel no dvb
btw. the same if I use a default 13.0e 19.2 list directly from e22tvh
So looks like the settings not compatible could it be verified how they should look like maybe its related due to the fact that it comes from titannit image converted by satchanneleditor to E2 and afterwards converted by e22tvh to wetek play
or any other idea?
thats the issue ther is neither astra nor hotbird network
this should come with the e2 settings right?
If yes what is wrong with the settings?
If i set manually i can use 4 port or 2 port both working. But if i use e22tvh to set external settings i do not get the sats for choose
Yes 2 lnb for 4 boxes astra is on Port B Hotbird A
I have MONO Quad LNB
- - - Updated - - -
here are my settings
Follow These steps:
Install openelec 5.0.7
Install unoffcial Addon
Install tvheadend backend
Enable Live TV choose tvHeadend frontend
reboot
open e22tvh
enter IP of Wetek Play
choose from file -> lamdb
settings will be transfered
10:45:58 : Preparing...
10:45:58 : E2>TVH Convert Phase 1 - Start
10:45:58 : E2>TVH Convert Phase 1 - Done (0,09 sec.)
10:45:58 : E2>TVH Convert Phase 2 - Start
10:45:59 : E2>TVH Convert Phase 2 - Done (0,31 sec.)
10:45:59 : Archiving Start.
10:46:00 : Archiving ...
10:46:01 : Archiving Done.
10:46:01 : TVHCh File Exist, Start Uploading to WETEK...
10:46:01 : Transfer Ch.List - Start
10:46:17 : Transfer Ch.List - Stop
10:46:17 : Connecting to: 192.168.0.185
10:46:18 : Waiting to request a password...
10:46:19 : Password: openelec
10:46:19 : Connected | LoginSucceeded.
10:46:20 : Send command success.
10:46:22 : Send command success.
10:46:22 : Send command success.
10:46:22 : Send command success.
10:46:22 : Done
Can see the Bouquets in Live TV
Than disable Live TV
erase PVR Database and EPG DB
reboot
Open TVheadend in Browser
Go to configuration -> DVB Input
Enable tuner 1
and set LNB -> 4 port Switch
Go to 4 Port Switch and try to open AA Dropdown from Basic Setting (right Dialog)
No Satellite available to choose.....
That's how I understood the How to you sent.
http://linuxsat-support.com/showthread.php?t=79493
Any wrong behavior I use?
Thank you
Can you maybe test my settings?
This issue ist sorted - was an config issue with Win 7 and e22tvh.
thats now open when following the how to you mentioned yesterday.
still not able to choose any Satellite in tvheadend the dropdown is empty.
As said choose lamedb and hit from file.
Bouquest available on wetek play but no names and no free adapter follwoing the How to does not give possibility to choose the satellites A and B which is Astra 19.2 and 13.0 Hotbird. btw. the same if I choose a list from e22tvh and from net.
any idea ? or do I have to configure the satellites via Networks Tab?
Because from the How To it looks like you should see Sattelites directly in DVB Inputs without doing any step before.
If not how to verify my E2 Settings are compatible?
I get crazy here
Ok right its working now but still not able to choose any Satellite in tvheadend the dropdown is empty.
As said choose lamedb and hit from file.
Bouquest available on wetek play but no names and no free adapter follwoing the How to does not give possibility to choose the satellites A and B whic is Astra 19.2 and 13.2 Hotbird. btw. the same if I choose a list from e22tvh and from net.
Any thoughts
Kind regards
- - - Updated - - -
any idea ? or do I have to configure the satellites via Networks Tab?
Because from the How To it looks like you should see Sattelites directly in DVB Inputs without doing any step before.
If not how to verify my E2 Settings are compatible?
Please help!
Thank you
- - - Updated - - -
tried same with default lists an hit from net either now no sattelites abloe to choose.
I get crazy here
Does someone has an idea?
You are right off topic but answer to superdroid who said all fine.