Most people take a suitcase but i suppose its possible lol, as long as you have a dish pointing where you want it there should be no issues you will however need a travel adapter for it , now thats a dedicated hobbyist :lmao:
Was thinking after i phrased that wrong
With *** cutting back on the signal strength was it still possible
I have a paid *** account but have a dreambox lying around and was going to setup the box instead of shipping the bigger box down
hi folks
Just wondering is it possible to take the dreambox to portugal for the hols
I have this done.. Do i have to restart oscam to see if it takes it ... Everything else is wroking a dream except for this..
Thanks for the reply too
I have the exact same problem
[account]
user = test1
pwd = test2
group = 1,2
monlevel = 4
au = slyuk
caid = 0963
cccmaxhops = 0
cccreshare = 0
keepalive = 0
[reader]
label = slyuk
protocol = mouse
detect = cd
device = /dev/ttyUSB0
emmcache = 1,3,2
caid = 0963
boxid = xxxxxxxxx
blockemm-u = 0
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
mhz = 357
cardmhz = 357
ident = 0963:000000
group = 1
Any help on this
hi again
This is driving me mental
here is my oscam file
2011/05/04 19:51:33 B75256C0 s newcamd: Bind request failed, waiting another 3 seconds
2011/05/04 19:51:34 B75256C0 s newcamd: Bind request failed, waiting another 2 seconds
2011/05/04 19:51:35 B6CFC280 c client connected to 10000 port
2011/05/04 19:51:35 B75256C0 s newcamd: Bind request failed, waiting another 1 seconds
2011/05/04 19:51:35 B6CFC280 c user test1 is trying to connect but doesnt exist ! (CCcam)
2011/05/04 19:51:35 B6CFC280 c plain newcamd-client 127.0.0.1 rejected (no such user)
2011/05/04 19:51:35 B6CFC280 c thread B6CFC280 ended!
2011/05/04 19:51:36 B75256C0 s newcamd: Bind request failed, giving up
2011/05/04 19:51:36 B75256C0 s radegast: disabled
2011/05/04 19:51:36 B75256C0 s http thread started
2011/05/04 19:51:36 B75256C0 s creating thread for device /dev/ttyUSB0
2011/05/04 19:51:36 B7524280 h HTTP Server couldn't bind on port 8888 (errno=98 Address already in use). Not starting HTTP!
2011/05/04 19:51:36 B75256C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/05/04 19:51:36 B75256C0 s waiting for local card init
2011/05/04 19:51:36 B73FFB70 r reader thread started (thread=B73FFB70, label=***uk, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/05/04 19:51:38 B6CFC280 c client connected to 10000 port
2011/05/04 19:51:39 B75256C0 s init for all local cards done
2011/05/04 19:51:39 B75256C0 s anti cascading disabled
2011/05/04 19:51:43 B6CFC280 c Connection closed to client
2011/05/04 19:51:43 B6CFC280 c thread B6CFC280 ended!
2011/05/04 19:51:45 B6CFC280 c client connected to 10000 port
2011/05/04 19:51:45 B6CFC280 c user test1 is trying to connect but doesnt exist ! (CCcam)
2011/05/04 19:51:45 B6CFC280 c plain newcamd-client 127.0.0.1 rejected (no such user)
2011/05/04 19:51:45 B6CFC280 c thread B6CFC280 ended!
2011/05/04 19:51:53 B6CFC280 c client connected to 10000 port
2011/05/04 19:51:56 B7511280 c client connected to 10000 port
2011/05/04 19:51:56 B7511280 c user test1 is trying to connect but doesnt exist ! (CCcam)
2011/05/04 19:51:56 B7511280 c plain newcamd-client 127.0.0.1 rejected (no such user)
2011/05/04 19:51:56 B7511280 c thread B7511280 ended!
2011/05/04 19:51:58 B6CFC280 c Connection closed to client
2011/05/04 19:51:58 B6CFC280 c thread B6CFC280 ended!
2011/05/04 19:52:06 B6CFC280 c client connected to 10000 port
2011/05/04 19:52:06 B6CFC280 c user test1 is trying to connect but doesnt exist ! (CCcam)
2011/05/04 19:52:06 B6CFC280 c plain newcamd-client 127.0.0.1 rejected (no such user)
2011/05/04 19:52:06 B6CFC280 c thread B6CFC280 ended!
What am i doing wrong... I think all the ports are set right
Here is my CCcam.cfg file
N: 127.0.0.1 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14
f: password password
SERIAL READER : /dev/ttyUSB0 smartreader+
BOXKEY: /dev/ttyUSB0 xxxxxxxx
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
SERVER LISTEN PORT : 10000
Here is my oscam.conf
[global]
nice = -1
WaitForCards = 1
pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw
maxlogsize = 10000
[newcamd]
port = 10000@096C:000000
key = 0102030405060708091011121314
[webif]
httpport = 8888
httpuser = user
httppwd = pass
httprefresh = 0
httpallowed = 127.0.0.1,192.168.1.1-192.168.1.254
httphideidleclients = 0
httpreadonly = 0
Here is my oscam.server file
[reader]
label = ***uk
protocol = mouse
detect = cd
device = /dev/ttyUSB0
emmcache = 1,3,2
caid = 0963
boxid = xxxxxxxx all have been kept together
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
mhz = 357
cardmhz = 357
ident = 0963:000000
group = 1
And finally my oscam.user file
user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1,2
au = s*yuk
caid = 0963
user = password
pwd = password
monlevel = 0
uniq = 0
group = 1,2
au = s*yuk
caid - 0963
On my dreambox inside at home i have put
C: my ip 10000 password password
Everything i try is taking me under...
I am using a Ubuntu Server and never touched Linux in my life up until a week ago... Massive setup.. But this is really cracking me up
Any help would be really helpfull
do you know much about the cccam.cfg setup.. I put in the N line for it to connect into the oscam.server file with the port 15000 open in each...
I then put in the F line for me to connect my dreambox 500 and changed the file C line to see the F line on the server....
Do i need to fill in anymore stuff... Just picked this cccam.cfg file off the web as an example...
I know this is a example for a dreambox and if you could point me in the right direction it would be brill
SERVER LISTEN PORT : 12000
WEBINFO USERNAME : root
WEBINFO PASSWORD : dreambox
TELNETINFO USERNAME : root
TELNETINFO PASSWORD : dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 3
OSD USERNAME : root
OSD PASSWORD : dreambox
OSD PORT : 80
SHOW TIMING : yes
MINI OSD : yes
DEBUG : yes
NEWCAMD CONF : yes
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
#SOFTKEY FILE : /var/keys/SoftCam.Key
#AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
MINIMUM CLIENT VERSION : 1.7.0
MINIMUM DOWNHOPS: 1
Is this correct as i am just a beginner
root@ubuntu:~# tail -f /var/log/oscam.log
2011/05/04 14:57:27 B73FF6C0 s newcamd: initialized (fd=8, port=150000, crypted)
2011/05/04 14:57:27 B73FF6C0 s CAID: 096C
2011/05/04 14:57:27 B73FF6C0 s provid #0: 000000
2011/05/04 14:57:27 B73FF6C0 s radegast: disabled
2011/05/04 14:57:27 B73FF6C0 s http thread started
2011/05/04 14:57:27 B73FF6C0 s creating thread for device /dev/ttyUSB0
2011/05/04 14:57:27 B73FE280 h HTTP Server listening on port 8888
2011/05/04 14:57:27 B73FF6C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/05/04 14:57:27 B73FF6C0 s waiting for local card init
2011/05/04 14:57:27 B73E3B70 r reader thread started (thread=B73E3B70, label=slyuk, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2011/05/04 14:57:31 B73FF6C0 s init for all local cards done
2011/05/04 14:57:31 B73FF6C0 s anti cascading disabled
Thanks
i have done all that now ... Checked it all out and restarted the oscam... No errors thank god...Checked the log.. More reading to be done... Thanks a million. Great help
hi
DId as you said and many thanks
Restarted the oscam and here is some of the errors i am getting...
I am using Ubuntu 10.4
Some learning curve this.. Thanks a million for the previous bit of help
2011/05/03 22:22:31 B75E56C0 s newcamd: Bind request failed, waiting another 9 seconds
2011/05/03 22:22:32 B75E56C0 s newcamd: Bind request failed, waiting another 8 seconds
2011/05/03 22:22:33 B75E56C0 s newcamd: Bind request failed, waiting another 7 seconds
2011/05/03 22:22:34 B75E56C0 s newcamd: Bind request failed, waiting another 6 seconds
2011/05/03 22:22:35 B75E56C0 s newcamd: Bind request failed, waiting another 5 seconds
2011/05/03 22:22:36 B75E56C0 s newcamd: Bind request failed, waiting another 4 seconds
2011/05/03 22:22:37 B75E56C0 s newcamd: Bind request failed, waiting another 3 seconds
2011/05/03 22:22:38 B73EEB70 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/05/03 22:22:38 B73EEB70 r recompile with SmartReader support.
2011/05/03 22:22:38 B73EEB70 r Cannot open device: 002:005
2011/05/03 22:22:38 B75E56C0 s newcamd: Bind request failed, waiting another 2 seconds
2011/05/03 22:22:39 B75E56C0 s newcamd: Bind request failed, waiting another 1 seconds
2011/05/03 22:22:40 B75E56C0 s newcamd: Bind request failed, giving up
2011/05/03 22:22:40 B75E56C0 s radegast: disabled
2011/05/03 22:22:40 B75E56C0 s http thread started
2011/05/03 22:22:40 B75E56C0 s creating thread for device 002:005
2011/05/03 22:22:40 B75E4280 h HTTP Server couldn't bind on port 8888 (errno=98 Address already in use). Not starting HTTP!
2011/05/03 22:22:40 B75E56C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/05/03 22:22:40 B75E56C0 s waiting for local card init
2011/05/03 22:22:40 B75C9B70 r reader thread started (thread=B75C9B70, label=***uk, device=002:005, detect=cd, mhz=600, cardmhz=600)
2011/05/03 22:22:40 B75C9B70 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/05/03 22:22:40 B75C9B70 r recompile with SmartReader support.
2011/05/03 22:22:40 B75C9B70 r Cannot open device: 002:005
2011/05/03 22:23:38 B73EEB70 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/05/03 22:23:38 B73EEB70 r recompile with SmartReader support.
2011/05/03 22:23:38 B73EEB70 r Cannot open device: 002:005
2011/05/03 22:23:40 B75C9B70 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/05/03 20:31:40 B74EBB70 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/05/03 20:31:40 B74EBB70 r recompile with SmartReader support.
2011/05/03 20:31:40 B74EBB70 r Cannot open device: 002:004
2011/05/03 20:31:55 B74BEB70 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/05/03 20:31:55 B74BEB70 r recompile with SmartReader support.
2011/05/03 20:31:55 B74BEB70 r Cannot open device: 004:002 ------ you will have to change this.goto part 11.
2011/05/03 20:32:18 0 exit with signal 15
2011/05/03 20:32:18 B74EBB70 r exit with signal 15
2011/05/03 20:32:18 B74EBB70 r thread B74EBB70 ended!
2011/05/03 20:32:18 B74EBB70 r ERROR ICC_Async_Close: unknow reader type 7
Here is my oscam.server log
[reader]
label = ***uk
protocol = smartreader
detect = cd
device = 002:004
emmcache = 1,3,2
caid = 0963
boxid = xx xx xx xx
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
mhz = 600
cardmhz = 600
ident = 0963:000000
group = 1
I have a smartreader usb card reader and its coming in on the 002:004 ...
Am new at this and it cracking me up..
Have it running on a Ubuntu server
Any help would be brill
Thanks a million for that... Another piece of the puzzle solved... Putting in the Cccam.cfg file now will be another challange and getting it to work ...
When i put into Putty the links to download
sudo wget http://cdnetworks-us-2.dl.sourceforg...-1.0.8.tar.bz2
getting errors....
New to this.. If you have any advice it would be great
