Posts by daviddawn

  • Picture Freezes Every 3/4 times every hour for around 8 seconds ?

    Hello mate,


    Sorry for not replying, my head was starting to hurt, after having a break im once again attempting to get things how i want them, i want to use oscam for both my server and for my clients only, however for now im going from cccam to mgcamd and as far as i can tell its a lot more stable with less picture glitches but not all the channels clear and the next day it randomly switches itself off, requireing a restart on the softcam menu? why is this ? im going to do a fresh installon vix, can anyone advise where is the best place to download the softcams from any panels? because vix own feeds of cams don't seem stable, i have tried imajteam feeds also the same.


    Many Thanks

  • Picture Freezes Every 3/4 times every hour for around 8 seconds ?

    so im still struggling, below are my configs, can you see anything wrong?


    my server:


    *** - oscam.config - ***
    # oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11182
    # Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.conf.txt


    [global]
    logfile = /var/log/oscam.log
    nice = -1
    maxlogsize = 0
    preferlocalcards = 1
    emmlogdir = /usr/local/etc/


    [newcamd]
    port = 10000@0963:000000
    key = 0102030405060708091011121314
    keepalive = 1


    [cccam]
    port = 12001
    nodeid = F1AD8AAD10C115DA
    version = 2.1.3
    reshare = 1


    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = admin
    httprefresh = 15
    httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255


    *** - oscam.user - ***


    [account]
    user = linuxsat
    pwd = support
    caid = 0963
    au = 1
    group = 1
    services = sky digital (uk)


    *** - oscam.server - ***


    [reader]
    label = skyuk
    protocol = pcsc
    device = 0
    caid = 0963
    detect = cd
    group = 1
    emmcache = 1,3,2
    blockemm-u = 0
    saveemm-u = 1
    blockemm-s = 0
    blockemm-unknown = 0
    blockemm-g = 0



    my vu duo 2 box running OSCam r10648


    *** - oscam.server - ***


    [reader]
    label = remote server
    description = remote newcamd connector
    protocol = newcamd
    device = 192.168.1.2,10000
    key = 0102030405060708091011121314
    user = linuxsat
    password = support
    group = 1



    Look forward to your replies guys !

  • Picture Freezes Every 3/4 times every hour for around 8 seconds ?

    thanks maddog, that will definately help me when i come to setup, i have used a backup of openatv on vu duo2, which states it has the following installed.


    CCcam 2.1.3
    CCam 2.3.0
    mgcamd
    oscam


    now when i browse through softcam manager oscam is not listed but the others are, but oscamupdater is in there also for some reason ? i can only think this is because its in a different directory to the others thus why its not reading it? so im thinking i just setup the files and start oscam but telnet command? would prefer manage via softcam manager though.


    any help will be appreciated.


    cheers


    - - - Updated - - -


    am close to giving up and just sticking with CCcam.


    i downloaded oscam softcam via the openvix feeds, activated it, navigated to the web interfeace and setup a server in oscam.server file, after complete it only shows as a proxy and not connected!


    wow this is time consuming! ive looked it over and everything is in place, im just trying to use my box as a client via oscam rather than CCcam.

  • Picture Freezes Every 3/4 times every hour for around 8 seconds ?

    Hey pal,


    ok so i have added the linuxsat addons plugin to the box and have downloaded oscam with CCcam, browse to local install, however after i select it i receive a message stating refusing to load file as its already installed but i don't see it in my softcam manager using openvix blue hd skin.


    I know how to setup a c line for openbox, can i use n line in MGCamd ?


    Cheers

  • Picture Freezes Every 3/4 times every hour for around 8 seconds ?

    HI Master G,


    Thanks for the reply, i have just purchased a vu duo 2 to replace my dm800 as i heard good things about it, i can see you also use the same box, which version of oscam do you suggest, which do you use ? i could setup a oscam only connection for myself however i have 2 family members using openbox x5 which i believe only support CCcam, also how many connections do you believe warrant the implementation of the cache feature ?


    Cheers


    - - - Updated - - -


    HI Master G,


    Thanks for the reply, i did reply to the post but it didn't go through using the quick post feature ?


    I have now purchased a vu duo 2 to replace my dm800 as i heard good things about it, and can see you have the same box, which oscam version do you suggest ? which do you use with your box ?


    I can setup an oscam only connection on my box however i have 2 family members using openbox x5 which i believe only support CCcam and MGCamd, also how many connections warrant implementing the cache feature in oscam ?


    Cheers Pal

  • Picture Freezes Every 3/4 times every hour for around 8 seconds ?

    HI All,


    My dm800 running CCcam freezes 3 /4 times every hour and the freeze lasts around 8 seconds, i tried the search to find similar problems but found nothing, im running a ubuntu server with oscam r11182 with cccam 2.1.3, only 5 active people connected to my server so i know thats not the problem? they too experience the same thing, i have read setting cache in oscam may help ?


    thanks in advance for any input you can offer. :)

  • will i get the entitlement update with these configs?

    Quote from mckee25

    If you phone up it won't be a automated system your connected too, there will be a sly advisor on the other end of the phone... If your going to go down this road use the online help assistant on their website instead, does the same job with having to talk to an actual person.


    do you mean by using the activate my channel process online or by some other way ? through the help assistant ? so i would need to type my details in opposed to talking to a *** advisor ?


    thanks.

  • will i get the entitlement update with these configs?

    Quote from stevejo

    As said youll need to get it activated put the card in the server make sure au is set right , boot the *** box up but with the card in the server and having noted the card number get to the page with the receiver id as they will ask version, box serial ,card serial ,receiver id ,and get it activated only new cards come activated when we all get one , a replacement is a dead card that needs initialized still ,with no IN hit it wont wake



    so..i shouldn't try the dvbapi via oscam route ? also when they do require all thins info, is it an automated system i go through when phoning up? furthermore, is it a good idea to provide them with all this info from my box, because to me, it looks like i would just be setting myself up with a hw paired emm signal sent to me down the line, similar way to how they do it online only through the phone.


    thanks

  • will i get the entitlement update with these configs?

    thanks for the reply's guys, yes the first thing i done after i realised it wasn't reading entitlements was try the pin trick but that did nothing and nothing came up in oscam page to suggest so, also i forgot to mention, when i called them the advisor was surprised that no card was assigned to my box ??? and asked me where i purchased the box from ??? starnge? anyway, i have now left the card in dreambox with dvbapi enabled via oscam as "mckee" suggested, with all emms blocked except unique, i did first have all emms allowed and restarted oscam as "meerkat" suggested, then adjusted the blockemm settings once more, left it on sly 1 however it obviously doesn't clear sly 1 or any other channel as it has no entitlements, only can clear fta, will see what happens.


    thanks.

  • will i get the entitlement update with these configs?

    Quote from Mee®kat

    You will also recieve a new white 0963 card same as all other cards as their is no new card change on the horizon/how and what are you going to say to sly to convince them to send a new card and what are you going to do with it.


    MK


    hi guys im back! ok so i got them to send me a new card out, telling them my kid took it out and couldn't find it anywhere, last time i received the card, i put it straight into omnikey reader and oscam read entitlements, however now it says i have none CARDOK (no entitlements), and this is my log:


    2013/12/17 21:04:43 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8846 (i486-linux-gnu-libusb-pcsc)
    2013/12/17 21:04:43 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2166
    2013/12/17 21:04:43 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
    2013/12/17 21:04:43 0 s signal handling initialized
    2013/12/17 21:04:43 0 s newcamd: initialized (fd=5, port=xxxxx)
    2013/12/17 21:04:43 0 s -> CAID: 0963 PROVID: 000000
    2013/12/17 21:04:43 0 s cccam: initialized (fd=6, port=xxxxx)
    2013/12/17 21:04:43 0 s ***uk [pcsc] creating thread for device 0
    2013/12/17 21:04:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/12/17 21:04:43 0 s waiting for local card init
    2013/12/17 21:04:43 B7200468 h webif: decompressed 53050 bytes back into 152380 bytes
    2013/12/17 21:04:43 B7200468 h HTTP Server running. ip=0.0.0.0 port=xxxxx
    2013/12/17 21:04:43 8173218 r ***uk [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
    2013/12/17 21:04:44 8173218 r ***uk [pcsc] PCSC was opened with handle: 1598307500
    2013/12/17 21:04:44 8173218 r ***uk [pcsc] card detected
    2013/12/17 21:04:44 8173218 r ***uk [pcsc] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
    2013/12/17 21:04:46 8173218 r ***uk [pcsc] Card type: SYAV
    2013/12/17 21:04:46 8173218 r ***uk [pcsc] Rom version: 40LF
    2013/12/17 21:04:46 8173218 r ***uk [pcsc] classD0 ins36: returned unknown type=0x04 - parsing may fail
    2013/12/17 21:04:46 0 --- Skipped 1 duplicated log lines ---
    2013/12/17 21:04:46 8173218 r ***uk [pcsc] classD0 ins36: returned unknown type=0x02 - parsing may fail
    2013/12/17 21:04:46 0 --- Skipped 1 duplicated log lines ---
    2013/12/17 21:04:46 8173218 r ***uk [pcsc] parental lock setting: 3F 00 00 00
    2013/12/17 21:04:46 8173218 r ***uk [pcsc] type: VideoGuard B***B (0963), caid: 0963
    2013/12/17 21:04:46 8173218 r ***uk [pcsc] serial: ########, BoxID: ########, baseyear: 1997
    2013/12/17 21:04:46 8173218 r ***uk [pcsc] ready for requests
    2013/12/17 21:04:46 8173218 r ***uk [pcsc] found card system videoguard2
    2013/12/17 21:04:46 8173218 r ***uk [videoguard2] card detected
    2013/12/17 21:04:46 8173218 r ***uk [videoguard2] type: VideoGuard B***B (0963)
    2013/12/17 21:04:50 0 s init for all local cards done
    2013/12/17 21:04:50 0 s anti cascading disabled
    2013/12/17 21:04:50 8174DE0 c client connected to xxxxx port
    2013/12/17 21:04:50 8174DE0 c encrypted newcamd:xxxxx-client 127.0.0.1 granted (linuxsat, au=on (1 reader))
    2013/12/17 21:04:50 8174DE0 c user linuxsat authenticated successfully (CCcam)
    2013/12/17 21:04:50 8174DE0 c AU enabled for user linuxsat on reader ***uk


    any ideas ???

  • will i get the entitlement update with these configs?

    what way would you do it? as this doesn't seem to be working, it may be worth giving it ago, when you say "you should still be able to view channels if its not hw paired" do you mean entertainment channels in sd like sly 1, gold, comedy central, ect..? if so, yes i can still watch all those channels, i thought i read somewhere tho that even if the card is paired you could still watch these channels in sd, if i get them to send me another card out, is it likely going to be a new card different from the white one?


    cheers