Posts by bountyhunter21

It is not for you and me and for the average user I guess...

Thread

Latest NCam Emu for ALL IPK & sh4 spark v15.7 compiled and patched by RAED

Thanks fairbird & Linuxsat - support .com Team & Admin oktus
Ncam V15.7 compiled and patched READ as at 15/2/2026









Update ...
Ncam V15.7

(Code, 236 lines)




Note the following

In ncam.conf
pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and…

ahmed gazye

Jan 30th 2019

you can download it from here where it is ready and compiled and you can install it normally

100/100 ? 😲😳🙂

Good one...

Thank you very much man!

Thank you I got that the channel will open with only one subscription at a time...

I was just thinking that if I had 2 the moment the one will freeze the other will come in quickly and so no freezes will happen at all.

I have 2 normal readers/clines subscriptions and I noticed that when the one is freezing if I change it to the other (I have one in oscam emu and the other on cccam softcam) it will work so they don't freeze at the same exact time!

I don't have those with Mac or special ones...

If you know any really good ones with no freezes and high packages coverage at a low cost, you are welcomed to dm me.

I'll try to put all the readers/clines in the same oscam.server file and see how this will go.

I just read though that this will make it very slow especially on channel zapping since the emulator will look through a lot of lines in order to find the best one...

Thanks man, I learned something!

Thank you, a bit complicated but let's say I uunderstood something :)...

Sorry I am kind of a newbie and I am trying to learn and probably also asking some stupid questions!

So I will just put both my subscriptions in oscam.server and cross my fingers that it will be smart enough that in case one will freeze it will replace it instantly with the other...

What about the cccam.cfg files that it is located inside the oscam emu config files?

Will the oscam emu also read from that source?

Because this way if I had one reader on oscam.server and the other with clines on cccam.cfg then maybe the double oscam emu could read them at the same time?

Probably what I just said it's totally stupid...

But I am trying first to understand and secondly to try to avoid some freezes since I have two different subscriptions so I thought maybe if they could work almost at the same time the one with supplement the other and so the result will be no freezes, or not, idk !

Thank you for your time and for your explanation though really appreciate it

Quote from biko

Quote from bountyhunter21

Hello and thank you for your work...

(Even if I don't understand what it does 🙊 )

Just a question and sorry if it will sound stupid because I am a newbie,

What is double oscam supposed to do in comparison to oscam for example?

Do I need it it? will it give me something more in terms of unlocking more channels than the ones that I can already watch without additional subscriptions?

Thank you

Display More

double oscam lets you use more than one subscription at the same time

Display More

Thank you,

Got that :)

So if I have 2 different subscriptions they will run at the same time and supplement each other, so for example if the one freezes at a specific moment and the other doesn't, the feed will keep playing without any freezing?

And my real question is where do I put these two different subscriptions so they will work and run at the same time? Because if I would put them them on the oscam.server then they will just function I guess like one with many readers lines,

So I guess I should put them in separate files right?

In which ones please? 🙂

Thank you

Ναι δυστυχώς μας άφησε, και παρότι ήταν SD είχε αξιόλογη ποιότητα και είχε αρκετούς αγώνες ελληνικού ενδιαφέροντος κατά καιρούς!

Μόνη "free" λύση για σήμερα mola tv μέσο Ιταλίας με vpn!

Δυστυχώς όμως θέλει πολύ καλό VPN που πρώτα να έχει την Ιταλία ως επιλογή και δεύτερον να είναι σταθερό για να παίζει καλα!

Σε free δεν ξέρω κάποιο!

Hello and thank you for your work ..

I try to install it on open pli 8.3 octagon sf8008...

But I get this messages even if the installation is successful

"some plugins are not available extensions freeserver no module named requests"

I also copied the file that you have with the dependency boxbranding on the specific folder, also installed the dependencies from the dreamSATpanel, installed and removed them many times, rebooted but still the same :( ...

It works fine on open BH 5.1!

Thank you ...

Έλα ντε... Και στα αγγλικά που το ψάχνω από προχθές δεν βγάζω άκρη μάλλον πρέπει να μάθουμε βουλγαρικά σερβικά...

Thank you...

(I Like your backup images btw, if it is indeed you)

I tried a few to be honest but they have the same issues 😭... (More or less)

I guess it will take a bit time for everyone to adjust.

But it seems to be a kind of hope on the horizon :)

Quote from lex7791

Αλλιως για τους παιχταραδες χωρις stream relay.......

Εντάξει ρε φίλε Τα βλέπεις καμπάνα Αλλά εμάς τους άσχετους που δεν ξέρουμε δεν μας βοηθάς 😜😂

Ναι παιζει (οχι ολα τα καναλια βεβαια) , απλα δεν ειναι παρα πολυ σταθερο.

μπορει να ειναι και θεμα σερβιτορου. (εαν και δοκιμασα μερικους και τα ιδια κανει)

μπορει και θεμα του oscam

Thank you,

i was hoping that is also my box issue since the changelog says specifically things about my receiver...

i would apreciate if someone can help me how to do it just in case.

δες εδω:

Post

RE: Latest OscamEmu For ALL Images Mips Arm Sh4 IPK - DOWNLOAD ONLY NO CHAT

Update ...

OSCam V117.14

-iCam work with (DVBAPI and Radegast)


image settings for open source image


Radegast:
(Code, 3 lines)


DVBApi:

(Code, 3 lines)


python -c "$(wget https://raw.githubusercontent.com/MOHAMED19OS/Download/main/Emu/installer.py -qO -)"

MOHAMED_OS

Oct 7th 2022

Hello,

Where do i put this since this is not an ipk file so i can install it?

i have already Oscam 11714 EMU with icam ver 5 already installed and working.

(it freezes a lot though and i was hoping this may fix it since i have an octagon sf8008 with openatv 7 & 6.4)

thank you.

Quote from kalkan99

Oscam 11714 EMU with icam dvbapi & Redegast ver 6

Quote

- Minor optimizations

- NEON is now used for ARM CPUs. These are special parts of the CPU that can execute certain code faster. This helps with decryption. From my point of view, the load on my sf8008 drops a bit. If you want to compare it, then always with the same station and preferably the same show. The load varies greatly from transmitter to transmitter. This means that 128 packets are decrypted at the same time and not 32 as before.



With Mipsel Broadcom boxes, there is no such type of processing as far as I've read. With Mipsel I wouldn't use Radegast (if possible) and I wouldn't even compile it at all

build juli13

Display More

Display More

Where do i put this since it is not

Όλα τα πολωνικά και παίζουν κομπλέ !

Hotbird χωρίς 2η σκέψη.

(Προς το παρόν τουλάχιστον ο Βαρσοβίας πάει τρένο)

Επίσης 1.9e 0.8w 19.2(έχει γραμμηθει) 16 έχει λίγα πια και όχι 100% σταθερός... Και έχω ακούσει ότι και στον 9ε κάτι έχει !!!

Quote from samantas

Σχετικα με Sport Klub στον bulgariasat

sk μαυρο

sk 1 μπαρες

sk 3 παγωμενο

εγινε κατι;

Τα ίδια και σε μένα και έκανα μία έρευνα στο internet αλλά δεν βρήκα κάτι...

Ελπίζω να μην είναι σημάδι Και αρχίζουν να μας αφήνουν όπως μας άφησε ο Γερμανός και πρακτικά και ο Ισπανός

kostas85 Σίγουρα τον 1.9 χωρίς δεύτερη σκέψη στον 16 έχουν μείνει ελάχιστα και δεν είναι και ιδιαίτερα σταθερά. Ενω ο 1.9 έχει σχεδον τα πάντα και μέχρι στιγμής όλα πάνε τρένο...

Επίσης θα μπορούσες και τον 0,8w εάν δεν τον έχεις αλλά δεν έχει μπάσκετ και όχι τόσο πολύ τένις όσο το άλλο!

Ευχαριστώ πολύ,

Θα το δοκιμάσω

Καλησπέρα παιδιά,

Θέλω λίγη βοήθεια άμα γνωρίζει κάποιος...

Με δεδομένο ότι δεν έχω smart TV και για παράδειγμα όταν θέλω να δω Ευρωλίγλα, είναι λίγο δύσκολο πρέπει να συνδέσω υπολογιστή και δεν είναι πολύ πρακτικό.

Υπάρχει κάποιος τρόπος η plugin ώστε να μπορέσω να κάνω cast την οθόνη του κινητού μου σε enigma 2 receiver...

Εκτός εάν υπάρχει φυσικά κάποιο plugin της Ευρωλίγκας για E2, που παρότι το έψαξα Δεν βρήκα κάτι ή εάν υπάρχει κάποιος τρόπος μέσω kodi. Θέλω απλά να δω την κανονική μου πληρωμένη συνδρομή με κάποιον τρόπο μέσω του δέκτη αίνιγμα 2...

Το κινητό είναι android και ο δέκτης ο octagon sf8008.

Ευχαριστώ