update: finally got it sorted! the twin tuner cables were the wrong way round lol! cant believe it was something so simple lol! ;-)
all my fta channels are present now and i also have a fixed dish so i can record 28 and watch the other sats at the same time. kept the usals in place and snr is well above 65/70 now..
dbe also sorted as i was using older version. cheers!
update: installed the .xml file and did an auto scan.. 0 channels on 13, 12 on 19 and tons on 28.2! iv tried to do a manual scan using the transponder info given by master g for 13e.. i input all details and did a scan but 0 services/channels found?!
in the blackhole image, set up, satfinder..
13.0: 11836, auto, 27500, horizontal, auto fec.. snr 55 agc 71
19.2: 11836, auto, 27500, horizontal, auto fec.. snr 55 agc 71
28.2: same as above..
so im unsure why i have no channels on 13 and only 12 found on 19...as the box can detect the 3 sats.. one thing is my lat and lon values are different to dishpointer, but these 'non-standard' settings were input by the intsaller when the box/sat was originally installed, so im unsure whether or not to change these to the ideal values?!
other issue is dbe, i can connect to box, ftp and receive files, but nothing actually displays in the dbe window? so nothing to edit.. the log does confirm successful reception and transmission... so i cant manipulate any bouquets..
the original 40 odd lines were from the vanilla 1.6.2 image im guessing as i only flashed the box and once viewing the files via dcc, they were there. now they gone.. my channels are working though, except bbc 1 hd, i guess i need to update the .xml and channel bouquets now, 28.2 ok but 13 and 19.2 cant get many channels at all, a satellite icon is flashing and then the screen goes blank...
yes, i did a back up (there was only one line in the original vti image) and saved to notpad.. what i meant was when i viewed the .cfg file once in, there were 40 lines of various nature... i just transferred the .cfg file from my pc to the box and it replaced all the 40 lines... i now have just one line (the one i need) my concern is what were those other lines? and can i now just add as many peers as i want leaving them all active? thanx..
i managed to log in by resetting password in tspanel and then i changed the password via telnet using passwd command.. im in!
but, when viewing the cccam.cfg, there were about 40 lines, a lot of them never had a 'hash' in front of them so im assuming they were active.. on notepad i saved the old active one installed and pressed the arrow left (from pc to box), it replaced the old .cfg file with just one line (the one i had before) is this ok? or do i need to reflash the box again now? as iv lost all the .cfg lines?!! thanx
hi iv just flashed the bh1.6.2 and it all works ok..
problem is i cannot log into the box via dcc now, i never set a password before just left blank, now it wont let me log in... iv read that we need to set a password to ftp but i didnt before? downloaded flash wizard pro but again, that wont let me log in either... '530 error login'
any ideas please? cheers..
morning.. ok update:
i downloaded .xml (sats) and extracted via rar and saved it as is, so when both boxes on dcc open there were 2 arrows in the middle pointing either way... so i opened /etc and tubox.. then saw the same file in the vu+ so i clicked on the new one in the pc window and pressed the arrow left.. asked if i wanted to replace existing file so i pressed yes.
all seemed ok, thought i had the new sat list...
problems.. now...
prior to doing that i went into vti panel and set up epg.. that was it... i basically set up to download at 5.45 and sources to uk xmltv
before testing epg, i then did the sat.xml thing above and when it seemed to all be ok, i terminated the ftp session..
i then switched the vu+ off from the rear.. big mistake i think.. as i reckon to reload, i should have just pressed off on remote, hence upon switching on from rear and reload, it was stuck on the 'loading defaults' for ages
then it said 2497 epg something found and gave me a yes/no option so i said yes and it repeated the whole thing and then locked in the start up screen... i was able to press menu on remote and go into settings where i tried to restore the image i had backed up... no luck.. it was not restoring!
so at the minute screen is stuck in start up mode vti splash image says 'loading defaults'... no tv, nothing.. sats are there, transponders etc.. all stored, dunno about channels etc... i can press menu on remote and enter vu+ settings etc and vti panel.. but restore not working, i did back image up though...
i just left it on auto search and went to bed.. got up at 7 and it was still searching 190ish channels found on a sat i dont 26e?! lol! not one i have..
so can anybody kindly help me to restore the box now please? if i was to now upgrade the image, would i lose all my satellite settings? not something id like to lose, but i read that if i did a factory reset it would be just that?!!
thanx in advance guys.. ;-)
thanx very much master G.. i had downloaded the new .xml today also, although im only just getting to grips with all this linux stuff... im going to use dcc and dbe, im reading and reading and its driving me crazy lol! theory seems a lot easier than practical...
ill do as suggested, the rescan should be a full auto scan? (like setting up the box new again?) after i ftp the .xml file over? hard being at work 14hrs a day to get home to this... ill try it thanx again!
how would i check that please? i used dishpointer.com to set the usals up.. it all seemed ok, well 28.2 is virtually ok, the other 2 are just bare.. all the channels are there but no sound/picture...
anybody please :-) ?
is there something i should be doing with the existing channel lists? when i switch to full auto scan, it says arabsat on the transponder?!! not one im familiar with.. i thought it would scan astra/hotbird only... so i stopped the scan after a few mins...:confuse:
hi, im running my vu+ with motorised set up on 13.0e, 19.2e and 28.2e, it all worked well until now
my channels on 28.2 are generally ok, but iv only just reconnected everything and im missing virtually everything on 13 and 19.2.. can anybody help me reinstate these channels... i have then all listed but only the bbc ones seem to work, the snr is less than 6/7% on everything and the tuner 'a' is greyed out (vti image)...eg id like to watch the boxing on rtl austria on 19.2,
i found: RTL AUSTRIA DIGITAL - 12.226 HORIZONTAL - SYMBOL RATE 27.500 - FEC 3/4
when i view the actual channel, nothing appears.. i went into manual scan and input the above and it came back with nothing?! 0 services found... iv double checked the frequencies on king of sat, still cant get any channels to work?
thanx
thats brilliant! in fact, thanx to ur introduction to 'proception' i just found a site that may well cater for all my needs! cheers sir!
thats great! do we know max range of telves ir sender? i think this will be workable solution so thanx very much sir! haven't even started on the software side yet.. lol! ;-)
hi, im after a little control too.. eg magic eye (although i know that system doesnt work)
anyone using video and ir over coax baluns etc..
hi guys,
im still in the process of setting up my install and need to know what the IR data rate (khz) of the vu+ duo is?!
been in contact with tvlink, who tell me the ir rate is very important as if it is not between 30-40khz, their particular ir will not work...
failing that, has anybody successfully run an rf modulator with video distribution and control?
many thanx in advance... ;-)
