Posts by muzz

skybox f5 firmware update 2015 needed anyone know where I can download it please.
thanks

***uk mate

cool thanks mate but can it be used as a sever.
thanks

hi, does this come with two tuners or just one, I know its a twin tuner but ones plug and play I wanted to know if it come with the plug in one?. Also could this be used as a server.
thanks lads

- - - Updated - - -

sorry iv posted in the wrong place

its prob a no then

hi lads can the amiko micro hd SE be used as a server or is it just for a client. Also a new on hd channels at all?
thanks

Good to see the forum back

thanks for your help lads but give up with this et9000 im going to wait and get another box.
thanks

wheres the N line got to go mate
N: something.domain.something port# user pw 01 02 03 04 05 06 07 08 09 10 11 12 13 14

test in this way

[reader]
label = your_label
protocol = cccam
device = something.domain.something,port#
user = user
password = pw
group = 1
ccckeepalive = 1

for got to add my fline

F: et9000 et9000

SERVER LISTEN PORT : Now i know i have to change this to my server port?
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : my user
WEBINFO PASSWORD : my passwd
TELNETINFO USERNAME :my user
TELNETINFO PASSWORD :my passwd
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME : can i change
OSD PASSWORD : can i change
OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /var/log/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000

N: 127.0.0.1 10001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

port is open and working on my dreambox mate, I just cant get oscam to work on my et9000 I need to know exactly what to change for it to work in my et9000, I want to know how to just run oscam on my server but let clients connect with c lines and I would like to know how to do the same with oscam/newcamd (CCcam just to see whats best. all channels clear on my et9000 with just oscam running and I can see all my clines but they cant connect to me so im missing something silly. I went back to set it up on my vu+duo but the power board decided to blow up.
Thanks lads

- - - Updated - - -

OK lads this is what I have downloaded from Linux support plugin. oscam-svn9843-cccam-2.1.3 openvix. my image im using on my et9000 is openvix Apollo.
here are the oscam and cccam configs.
Thanks
##########################
###LINUXSAT-SUPPORT.COM###
##########################

[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[newcamd]
port = 10001@0963:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1

[webif]
httpport = 8888 can i change this
httpuser = can i change this
httppwd = can i change this
httprefresh = 15
httpshowpicons = 1
httpallowed = 192.168.0.0-255.255.255.255

[dvbapi] is this needed
enabled = 1
user = linuxsatsupport
boxtype = dreambox
au = 1
[cccam]
port = 12000 Do i have to change this to my server port
version = 2.1.3
build = 3165
reshare = 1

[account] I think i have to leave this as it is?
user = linuxsat
pwd = support
description = CCcam
caid = 0963
au = s**uk
group = 1

[account] is this needed
user = linuxsat1
pwd = support1
description = mgcamd
caid = 0963
au = s**uk
group = 1

[account] is this needed
user = linuxsatsupport
description = dvbapi
caid = 0963
au = s**uk
group = 1

SERVER LISTEN PORT : Now i know i have to change this to my server port?
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : my user
WEBINFO PASSWORD : my passwd
TELNETINFO USERNAME :my user
TELNETINFO PASSWORD :my passwd
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME : can i change
OSD PASSWORD : can i change
OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /var/log/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000

N: 127.0.0.1 10001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Thanks

I don't know now mate oscam just wouldnt work so Iv tried to set the box up with oscam and cccam with the files off here and even that don't work, I have oscam and cccam running great on my dreambox500 so I just change passwrds and my server port to the same in my et9000 as it is in the dreambox but no one can connect but works without bk in the my et9000 I just don't know what to do mate. sozz for being thick.

that was a joke mate. Ok iv set it up and it works on my box but all clients are off line?
thanks

ok thanks pal I will have another play tomozz, It'l be gone off by the time I get it sorted lol

thanks but is that all I have to do, Because this is what got me confused when you said this , Paste your line details into this handy tool and convert it to oscam server file: Copy the output of this program and paste it into your oscam server file on your receiver, So the server file is just for clines.
thanks pal

hi mate when you say details do you mean flins because when I do put my flins in off my cccam config it don't convert anything it will on convert clines but I only have fling in my server cccam file.
thanks

- - - Updated - - -

that should say only convert clines, When I paste my flins in to the prog it don't convert to anything.

hi pal im having a hard time trying to set oscam up on my et9000 as a server, Can you tell me how to set these files up for a server, my clients/ Family are using c lines, I have done this befor with help but I have forgot everything lol.
Thanks pal

my cards all ways been in my dreambox and that's got a broken tuner with no sat feeds and that's always worked, And without the sat feed in it does work but we don't get sports and movies and if I put bk in it only runs on cccam and we get everything, like iv said its strange oscam will only work with a sat feed in and I have to restart oscam for it to start and then it goes off and on, I have taken the vu off line now and setup my et9000 but cant test it yet.

- - - Updated - - -

Quote from muzz

my cards all ways been in my dreambox and that's got a broken tuner with no sat feeds and that's always worked, And without the sat feed in the vu+ it does work but we don't get sports and movies and if I put bk in it only runs on cccam and we get everything, like iv said its strange oscam will only work with a sat feed in and I have to restart oscam for it to start and then it goes off and on, I have taken the vu off line now and setup my et9000 but cant test it yet.

And without the sat feed in the vu+ it does work but we don't get sports and movies and if I put bk in it only runs on cccam and we get everything, like iv said its strange oscam will only work with a sat feed in and I have to restart oscam for it to start and then it goes off and on, I have taken the vu off line now and setup my et9000 but cant test it yet.

yes I know pal but can you tell me why oscam wont work unless I have the satellite feed in.
thanks pal

- - - Updated - - -

cant get it to work ok its not reliable one min its working next its not so I may just sell it and try and set my et9000 up as a server and if sly gets sorted I will buy a new box off the sponsor. Im going to try and set it it my self but may need help.
thanks

well at the min in my dreambox I don't need the box key and using oscam/cccam backup image and its allways bin ok so all them files iv downloads from the link should be ok when I put my details in.
thanks

- - - Updated - - -

ok it all working with oscam on my vu+ duo BUT? something strange is going on, oscam will only work if I have a sat feed in and I don't want any sat feeds in its only for a sever I am using my et9000 for viewing, Is this a new one for you or can is be sorted.
thank you lads

white card not paired mate, and I thought you didn't need boxkey for oscam+cccam, Its running in dreambox 500 with oscam+cccam running ok but I wanted to set my duo up just incase the dm blows up again lol.
thanks

- - - Updated - - -

ok done all that will let you know if it works thanks lads

- - - Updated - - -

sozz to be a pain but where do I change the clock speed to 357mhz in the cccam.cfg I can only see it in oscam server file .
thanks

got that but not tested yet , which ones the cccam file mate.
thanks

- - - Updated - - -

mm wont work I need cccam file and I cant see it the that code on the link pal