Yes, totally agree on the above.
So I recommend only boxes using free software (open source) boxes, as enigma, for example.
Factories often create a basic software (closed source) , where is a team (using open source) this usually improves the firmware.
Posts by alibaba1802
-
-
Display More
:hell_boy:
I did my part, I backed up my user database, I was careful to make sure I had a back up.
I updated allcode with 1020, they don't give enough consideration to making sure the DB's can be restored.
So, I have LOST ALL MY SATELLITES, ALL CHANNELS, EVERYTHING!
So, I have to spend 4 hours setting up 42 Satellites all over again, etc.
They added more support for new features, but it will be a while before I can test because I get to setup my box ALL OVER AGAIN!
Thanks Guys!
Changing firmware is dangerous (and coming from chinese.....more ... lol), so make always a full backup.
-
Display More
0x2882025c910bh
I don't go by maincode where it says S3606, I have seen it change depending on FW used.
By the way, NewCamd does not work... I am rolling back to CHN 1016, I do like the fact that the channels are now displaying over the whole screen, noticed IKSserver but parts are greyed out so it must be a new feature yet to be implemented. Overall I think there may be a slight speed increase but that could be due to them not exporting and importing the DB right and all the time I had was one sat.
And I looked at the CHN 1016 DB Backup made, empty. So, this could mean that the failure actually was not 1020 but CHN 1016 and it's failure to dump the db right. I will be keeping an eye on that.
Newcamd was tested for South America and works 100%. -
What is your chip id ?
This is very important. -
Use this firm for the following chip IDS: 3606d and 3606h
- Wifi support
- Newcamd works
- more improvements, like the chineses version from 16 October.
-
Update : 23/10/12
Diverse
Minor changes -
Hi, just had a friend come to me with his Openbox S11HD saying that a message appeared saying "Your Box Is A Clone Version, Invalid Chip ID" and now the box will not come on at all, no display on lcd, no picture, nothing, completely dead.
Has anyone seen or heard of this problem before and if so is there a fix for it??Thanks!
Never seen or heard of this problem, try this :
Erom Repair - With Repair File HDS2_CMT_ENG.ABS.rar
or
And use this firmware:
http://linuxsat-support.com/op…passion-03-02-2012-a.html
or similar.
-
Update : 17/10/12
BBC News
BBC One NE & C
BBC Three
BBC Four
BBC Alba
CBeebies
CBBC
Heart TV
Capital TV
Minor order change -
i bought a ***Box F3 but what i do next? pls help me?
If you dont have the latest firmware, a good idea can be update to latest:
-
can anyone tell me why my openbox x3 shows me just asian satellites even when update-ing with europe patch? I'm freaking out i'm got it today updated, and wtf there are just asian satellites why?
Please help guys!
thanks in advance!
Please make an introduction.
linuxsat-support.com/introductions
-
Looking for CCcam. cnf, .prio, constant.cw, softkey.key and smartcard.conf can someone direct me.
First you need to post an introduction thread.
-
does anyone working with OpenBox F3 channel list Based on SGTFlipFlop or not?
Please introduce yourself here before posting any questions.
-
Ok.
If i have more information about this problem i will report here. -
I would say that the OpenBox series are just that, an Open Ali chipset for anyone to manufacture and put out.... I am impressed with years of service from my Ali3602 (OpenBox S9HD)... I have found a Ali3602A and carefully watched videos with the chipset and almost exactly the same setup and options, etc. and a revision helped in bringing new features...
So, in my opinion I believe that the Ali3606C chipset has great potential but the FW must be completely dropped from the disaster it IS today into the features that have made 3602 be so successful. IMHO...
Do you try this:
-
FIRMWARE OPENBOX S16 26/09/2012
No changelog
-
I have tried to use 2.2.1 and it puts my box in a boot loop...
I have tried to use 2.7, 2.8, 2.8.1, 2.11 all work fine BUT, NewCamd Does NOT WORK AT ALL
I dont know why it doesnt work.
I think you try all firmwares..... :( -
Update : 09/10/12
*** Movies 007 HD
Nickelodeon +1
Nick Junior +1
E! HD
PTV Prime
Channel S
Madani Channel
NTV
Channel i
ATN Bangla
Noor TV
Channel 9
HiTV
UCTV
Gospel Channel
Geo TV -
Display More
:angry:
Cannot get NewCamd to work on OpenBox S16 and on S3606H-1.0.0 (9/14)
On any FW I install, NewCamd does not work..
Any help would be highly appreciated.
Do you install this firm: http://linuxsat-support.com/op…g-v-2-7-15-07-2012-a.html
NewCamd tested with this "special" firm ------> http://linuxsat-support.com/op…nbox-s16-please-read.html
Be careful and read the thread.
-
Firmware Doombox:
Changelog v.3.2.16919 (29-06-2012)
SDS fix
Previous bug fixes.
(Card Seca, BIS, JSC card fixed)Channel list for Astra-Hispasat-Eurobird :
- 8 favorites
- include all channels up to 08/10/2012 -
Openbox S9/S10 Channel list for Astra 19.2
Update 05/10/2012
Include latest channels: Canal+2 HD and Golf+ HD
