in this section
#NDS Example
[CCCCCCCC] # nds camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
boxid= # if sbox can't get boxid from card, add here manually
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
replace [CCCCCCCC] with [09450000]
What i need to make work this card in my dreambox 800hd with smartreader v1.7
I appreciate any help you can give me.
thanks.
what i need to know Bus:dev in oscam for windows for use smartreader with oscam for windows.
list_smargo no work
Looking for smartreader compatible devices...
3 [main] list_smargo 2820 open_stackdumpfile: Dumping stack trace to list_smargo.exe.stackdump
thanks
fail with this config.
2013/06/28 04:00:20 2005B368 h ***Mex [mouse] creating thread for device /dev/ttyS1
2013/06/28 04:00:20 200F55B8 r ***Mex [mouse] Reader initialized (device=/dev/ttyS1, detect=cd, mhz=357, cardmhz=357)
2013/06/28 04:00:21 200F55B8 r ***Mex [mouse] card detected
2013/06/28 04:00:23 200F55B8 r ***Mex [mouse] ATR: 3F FF 3F FF 13 25 02 50 80 0F 54 B0 03 FF FF 4A 50 80 00 00 00 00 54
2013/06/28 04:00:24 200F55B8 r ***Mex [mouse] Warning: D=0 is invalid, forcing D=1
2013/06/28 04:00:24 200F55B8 r ***Mex [mouse] Init card protocol T5, FI=3, F=744, D=1, N=19
2013/06/28 04:00:24 200F55B8 r ***Mex [mouse] Setting baudrate to 4800 bps
2013/06/28 04:00:24 200F55B8 r ***Mex [mouse] Calculated work ETU is 208.40 us
2013/06/28 04:00:24 200F55B8 r ***Mex [mouse] ERROR: Parse_ATR returned error
2013/06/28 04:00:24 200F55B8 r ***Mex [mouse] Error activating card.
2013/06/28 04:00:26 200F55B8 r ***Mex [mouse] ATR: 37 5B BF F5
2013/06/28 04:00:26 200F55B8 r ***Mex [mouse] ERROR: Could not read reader->convention
2013/06/28 04:00:26 200F55B8 r ***Mex [mouse] Error activating card.
2013/06/28 04:00:29 200F55B8 r ***Mex [mouse] ATR: 3F FF 3F FF 13 25 02 50 80 0F 54 B0 03 FF FF 4A 50 80 00 00 00 00 54
2013/06/28 04:00:30 200F55B8 r ***Mex [mouse] Warning: D=0 is invalid, forcing D=1
2013/06/28 04:00:30 200F55B8 r ***Mex [mouse] Init card protocol T5, FI=3, F=744, D=1, N=19
2013/06/28 04:00:30 200F55B8 r ***Mex [mouse] Setting baudrate to 4800 bps
2013/06/28 04:00:30 200F55B8 r ***Mex [mouse] Calculated work ETU is 208.40 us
2013/06/28 04:00:30 200F55B8 r ***Mex [mouse] ERROR: Parse_ATR returned error
2013/06/28 04:00:30 200F55B8 r ***Mex [mouse] Error activating card.
2013/06/28 04:00:30 200F55B8 r ***Mex [mouse] card initializing error
i think this config is for a dreambox 500
i need help for oscam for windows and p5 sly mex card
thanks for your help
no work... i use a OSCAM 1.20-unstable_svn build r8729
oscam for windows with this config work and detect smargo smartreader+
[reader]
label = reader-0
description = sharebox
protocol = smargo
device = /dev/ttyS1
caid = 0905,095B,0945
boxid = 001F1F1F
detect = cd
mhz = 686
cardmhz = 686
ident = 095B:000000;0945:000000;0905:000000
group = 1
emmcache = 1,1,15
audisabled = 1
what is wrong ???
the speed ???
the reader ???
the card ???
i have a dreambox 800hd pvr but no detect the reader and i read some post and found oscam svn for pc windows and install it and work here but not detect or not read the card
look the log.
2013/06/28 03:30:21 2005B368 h reader-0 [smargo] creating thread for device /dev/ttyS1
2013/06/28 03:30:21 200738B8 r reader-0 [smargo] smargo init
2013/06/28 03:30:21 200738B8 r reader-0 [smargo] Reader initialized (device=/dev/ttyS1, detect=cd, mhz=533, cardmhz=357)
2013/06/28 03:30:22 200738B8 r reader-0 [smargo] card detected
2013/06/28 03:30:26 200738B8 r reader-0 [smargo] ATR: 3F FF 13 25 02 50 80 0F 54 B0 03 FF FF 4A 50 80 00 00 00 00 54 56 05
2013/06/28 03:30:26 200738B8 r reader-0 [smargo] Init card protocol T0, FI=1, F=372, D=4, N=2
2013/06/28 03:30:26 200738B8 r reader-0 [smargo] Calculated work ETU is 17.45 us
2013/06/28 03:30:27 200738B8 r reader-0 [smargo] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 5.33 MHz (specified in reader->mhz)
2013/06/28 03:30:28 200738B8 r reader-0 [smargo] card system not supported
2013/06/28 03:30:28 200738B8 r reader-0 [smargo] Normal mode failed, reverting to Deprecated Mode
2013/06/28 03:30:31 200738B8 r reader-0 [smargo] ATR: 3F FF 13 25 02 50 80 0F 54 B0 03 FF FF 4A 50 80 00 00 00 00 54 56 05
2013/06/28 03:30:31 200738B8 r reader-0 [smargo] Init card protocol T0, FI=1, F=372, D=4, N=2
2013/06/28 03:30:31 200738B8 r reader-0 [smargo] Calculated work ETU is 69.79 us
2013/06/28 03:30:31 200738B8 r reader-0 [smargo] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 5.33 MHz (specified in reader->mhz)
2013/06/28 03:30:32 200738B8 r reader-0 [smargo] card system not supported
2013/06/28 03:30:32 200738B8 r reader-0 [smargo] card initializing error
some body can help me please????
i probe various config in card speed and mhz too 357, 369, 533, 500, 600. 686 and finally i leave automatic and give me 533 and 357
Hi to all my people....
who can help me with my p5 card wih smargo smartreader+ OSCAM 1.20-unstable_svn build r8729.
i get this:
2013/06/27 02:43:20 2006C7E8 r reader-0 [smargo] smargo init
2013/06/27 02:43:20 2006C7E8 r reader-0 [smargo] Reader initialized (device=/dev/ttyS1, detect=cd, mhz=686, cardmhz=686)
2013/06/27 02:43:25 2006C7E8 r reader-0 [smargo] card detected
2013/06/27 02:43:29 2006C7E8 r reader-0 [smargo] ATR: DELTED BY ME, I THINK THIS IS CORRECT FOR PROTECT
2013/06/27 02:43:29 2006C7E8 r reader-0 [smargo] Init card protocol T0, FI=1, F=372, D=4, N=2
2013/06/27 02:43:29 2006C7E8 r reader-0 [smargo] Calculated work ETU is 13.56 us
2013/06/27 02:43:30 2006C7E8 r reader-0 [smargo] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.86 MHz (specified in reader->mhz)
2013/06/27 02:43:31 2006C7E8 r reader-0 [smargo] card system not supported
2013/06/27 02:43:31 2006C7E8 r reader-0 [smargo] Normal mode failed, reverting to Deprecated Mode
2013/06/27 02:43:33 2006C7E8 r reader-0 [smargo] ATR: DELTED BY ME, I THINK THIS IS CORRECT FOR PROTECT
2013/06/27 02:43:33 2006C7E8 r reader-0 [smargo] Init card protocol T0, FI=1, F=372, D=4, N=2
2013/06/27 02:43:33 2006C7E8 r reader-0 [smargo] Calculated work ETU is 54.23 us
2013/06/27 02:43:34 2006C7E8 r reader-0 [smargo] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.86 MHz (specified in reader->mhz)
2013/06/27 02:43:35 2006C7E8 r reader-0 [smargo] card system not supported
2013/06/27 02:43:35 2006C7E8 r reader-0 [smargo] card initializing error
Thanks for your helps.
oscam server
[reader]
label = reader-0
description = sharebox
protocol = smargo
device = /dev/ttyS1
caid = 0905,095B,0945
boxid = 001F1F1F
detect = cd
mhz = 686
cardmhz = 686
ident = 095B:000000;0945:000000;0905:000000
group = 1
emmcache = 1,1,15
audisabled = 1
i get this info in forum thread..
oscam.user
[account]
user = catdog
pwd = 123456
caid = 0905,095B,0945
monlevel = 4
keepalive = 0
group = 1
ident = 095B:000000;0945:000000;0905:000000
cccmaxhops = 0
cccreshare = 0
oscam.conf
[global]
logfile = d:\oscam\log\oscam.log
nice = -1
[newcamd]
port = 34000@095B:000000;0945:000000;0905:000000
key = 0102030405060708091011121314
keepalive = 1
[webif]
httpport = 81
httpallowed = 127.0.0.1,192.168.1.0-192.168.255.255
hideclient_to = 15
this is my log from newcs:
Welcome to the NewCS console
-> [ 12:28:29 ] [ Loader ] Reader type 2 on node /dev/usb/tts/0
[ 12:28:29 ] [ Phoenix ] Opening device /dev/usb/tts/0
[ 12:28:29 ] [ Phoenix ] Could not get device /dev/usb/tts/0
[ 12:28:29 ] [ Loader ] Reset failed ...
and this from newcs panel:
0000 368 0 0 0 /dev/usb/tts/0 0 (Smargo)
Yes i include the smart reader to cccam in newcs two but when i connect by web on port 3031 i see the message tell me can connecto to smartcard when i uae sr_tools_mipsel i get version frecuency info in the smart reader.
hi to all users in the forum, i have a big trouble to make work my smargo smartreader plus in my dm800 hd pvr
what i need to make this work with nds card Mex. thanks
i make some configuration but no work
i use dmesg to vie if the dreambox get active the port and smargo and everithing is fine its detect...
but when i run ccam 2.1.3 in cccinfo cam no device found.
thanks for your helps.
