Hi Guys
Just got myself a motorised dish.
However I am a little confused with regards to longitude & latitude.
Satpointer gives me these details
Location on map
Latitude: 52.044°
Longitude: 1.1235°
My Postcode is IP2 9NW if that helps
But How do I know whether I am east or west / north or south ?
Any help appreciated
Regards
Chris
Cheers m8 will see what if I can get it lol
I have noticed that if running the firmwares with YouTube / You porn there seems to be a problem with glitching / freezing / pixels, I have gone back to the firmware before youtube was added, dated 20-09-2012 hope this helps
can u explain a bit more as I have got a similar problem
Cheers mate, I was hoping there would have been away of doing it via the servers but if it has to be 2 lines 2 lines it will be.
As in 2 line each client box 1 to mine 1 to his ?
Hi Guys,
I have a debian linux server running oscam. with 11 clients (family only)
I also have a friend running the same thing with 10 clients (family only)
We are both sharing SLYUK
What I want to know is there a way in which we can merge these together so if 1 goes down for any reason the other 1 picks it up?
We both run on same port and user list's are different so can be combined.
Thanks in Advance
Chris
I have this setting set under oscam.user see my 2nd post
My Oscam Version is OSCAM 1.10rc-svn build #5775 <<<<my preferred version
If they reboot box or cam in most cases it works but if they go back to free to air for a while the same happens again
This problem has only occurred recently
no error messages appearing mate just taking a while to connect into server for it to clear channels
Forgot to post my Files
OScam.Conf
[global]
usrfile = /var/log/oscamuser.log
logfile = /var/log/oscam.log
cwlogdir = /var/log/cw.log
clientmaxidle = 60
nice = -19
maxlogsize = 2500
saveinithistory = 1
dropdups = 1
[monitor]
hideclient_to = 15
appendchaninfo = 0
[newcamd]
port = 19000@0963:000000
key = 0102030405060708091011121314
mgclient = 1
[webif]
httpport = 1005
httpuser = chris
httppwd = 651975
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.202,82.9.115.124
httphideidleclients = 1
Oscam.server
[reader]
label = ***_uk
protocol = pcsc
device = 0
caid = 0963
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
lb_weight = 101
ecmwhitelist = 0963@000000:3E,4F,42,44,45,47,4E,53,54,56,61,67,62,68,69,6A,6B,6E,6D,6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8B,85
Oscam.user
[account]
user = 888888
pwd = 888888
group = 1
uniq = 1
caid = 0963
ident = 0963:000000
keepalive = 1
Hi Guys
I have a couple of clients saying that if they have been watching freeview channels for a while that it can then take upto 5 mins to clear subbed channels.
Clients are using different boxes Spiderbox, TM500 Super & F3's.
Can anyone advise anything that may cure this please.
Or could it just be a case of rebuilding Oscam ?
Kind Regards
Chris
the port=xxxxx@0963:000000 is the port you have open on the router for users to connect to the card that has nothing to do with the actual updating the card.
both my cards have the same caid so I am not sure how you will set this for users to access the cards using only 1 port
this would be something you may have to play with ie
port=xxxxx@0963:000000
port=xxxxx@0500:000000
etc etc
or maybe it will be
port=xxxxx@0963,0500:000000
hope this helps you mate
The caid from each of your cards, so it will be 0963 for slyuk make sure to insert a comma between each caid this should then get them updating however i believe you will need local client box with n line connected to your motorized dish and pointing at the different satellites as the updates are due, also channel selected must be of a paid for channel from that card. IE slyuk updating SlY1
I hope this helps
As an example mine is set like this under oscam.user
[account]
user = update
pwd = update
description = for local mgcamd or DVBAPI
group = 1,2
uniq = 1
au = card1,card2
caid = ****
Running n line on local client box under cccam
N: 192.168.0.199 19000 update update 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 edit local ip and port to suit
Hope this helps you
Hi Guys
I have now got 2 of the same cards in my server,
I currently have 1 auto updating but not sure how to set oscam to update the second card as-well.
I currently use the following to update my 1st card how can I edit it to update 2nd card as-well .
[account]
user = update
pwd = update
description = for local mgcamd or DVBAPI
group = 1
uniq = 1
au = card 1
caid = 0963
Hi mate, I know how to see entitlments what I was meaning was wasn't sure how to see emm and understand it
Hiya mate card has updated and this is what I can see on webinfo but not quite sure what i should see lol
I now have these files and mods up and running :)
Under AU in webinfo I occasionally get ACTIVE instead of on, I take it from this that it means all is good to go ?
Cheers
Chris
Thanks m8 I will change it an reboot in the morning
Cheers again for your help
How oftern do the dates change?
Is there anyway of knowing card will update before it happens?
