Posts by Nitemare

yes that's my next plan of action to try. 👌

All working again .... apart from HDD!! There doesn't seem to be power going to it ... I've tried a brand new HDD and still nothing!? I've tried Putty commands but comes back with dev/sda not found?

USB stick works as before its just the HDD that doesn't appear!

Any ideas and or fixes?

Thanks.

Well!! It was NONE of the above!! It was a power issue YES nut it was the actual power supplu unit itself!! Noticed green light on it was pulsing as per noise in box!!

Changed it over for another and the box has powwred on!!!

What a day!!

Quote from Ev0

Quote from Nitemare

Quote from Ev0

It's the power switch on the rear panel that was the issue for me.

How exactly did you adjust it?? I've taken box apart and main board looks ok. The fromnt panel circuit board I'v etaken aprt but can seem able to "adjust" front power button?

Thanks by the way for replying! Hope you can assist?

Quote from Ev0

The reason I asked if you just had the white light, is that is all I had on mine.

2.5 - 3 years ago I thought the Ultimo4K was dead as it just wouldn't power on, although after a while it would start to boot and then lock up.

After messing about with it for a while, I realised it was the power switch itself that was the issue from all the on/off and back on with reflashing the box.

In the end I managed to get the switch into a position where it all worked fine, and have since then never touched it again and instead resorted to pulling the power cable out and reinserting it when it does need to be powered off.

Been working fine since then, so don't give up on it.

I did take the box to bits too to see if it was a dry solder joint, but it wasn't.

Display More

Hi Evo,

Seems I might have same issue??? Power comes on with only front LED light which flashes quickly. I can hear a noise inside the box which seems to be corresponding to the the speed of the flashes??

How did you overcome the Power Button issue? I took front panel off but from there I cant seem able to reposition button?

Thanks.

If possible can you please do an OpenBH 5.5.1 version?? I leave the picture chosen up to you

Thank-you

KiddaC ... that's it back on Green panel now with version 2.10

OBH 5.4.1.007 vU+ ultimo 4K

Cheers

Quote from oktus

Display Spoiler

new bootlogo openbh 5.3 by oktus

Hi can you do this as backdrop.mvi also please??

Thanks,

Nitemare.

Quote from GioppyGio

Quote from Nitemare

Can we stop this version of E-Channilzer from writing a unique EPG reference code for EVERY channel please!!??

Currentlly this deletes the base 4097_0_1 and 1_0_1 references which have NO EPG assigned to them!!!

Thanks in advance,

Nitemare.

Otherwise it works great thanks.

Display More

What's the problem of unique reference?

Display More

it overwrites the default 1_0_1_ and 4097_0_1 reference codes negating the default Picon I have for both!!

Thanks,

Nitemare.

Can we stop this version of E-Channilzer from writing a unique EPG reference code for EVERY channel please!!??

Currentlly this deletes the base 4097_0_1 and 1_0_1 references which have NO EPG assigned to them!!!

Thanks in advance,

Nitemare.

Otherwise it works great thanks.

Updated today to Version 23.0.0.226 ... all okay but for one issue!!

Would it be possible to add the Clear EPG & Picon item as last seen in the older Version 4 E-Channlizer?

In verion 4 when you did this on a channel it reset the EPG & Picon to reference default setting of 1_0_1_0_0_0_0_0_0_0 or 4097_0_1_0_0_0_0_0_0 depending on Stream type.

In the newer E-channelizer this option doesn't seem to be avialable and you are unable to revert a channel from its unique reference to a default one (as above).

Thanks,

Nitemare

Think latest beta 22.0.0.111 needs a look at!! Not woriking as before ... can't access main channels listing!!!

Is it possible to add the feature that was on Version 4 were you could automatically reset the channel reference code to 1_0_1_0_0_0_0_0_0 or 4097_0_1_0_0_0_0_0_0 by clearing the EPG and Picon?

Also when you select a Satellite (singly) to amend channel data, when you are finished, you then have to deselect and reselect "ALL" to get all channels to show again!!?? A bug I think!!??

Thanks,

Nitemare.

Thanks ... 527 seems fine now!!

Bug in .522 ... won't save changes made to Transponder in each indiviual Channel window!!!

.515 worked fine!!!

Can't ADD a channel either!!!

PLease FIX or go back to .515!!!

Quote from KiddaC

Quote from Nitemare

Hi Kiddac,

Recently introduced to your IPTV Maker and very good it is too!

However, I can't seem to populate my TV Shows (Series) bouquets? My provider does have the word SERIES in each appropriate line (which i read earlier in this thread to check).

I also tried to extend the server time out function but as yet I've had no success with Series lines on my m3u file?

Any idea yourself (or anyone) on how to remedy this please?

Thank-you,

Nitemare.

Display More

Series are becoming a bit of a nightmare and probably broken for a lot of people now due to providers changing the get.php addresses to direct sources (which doesn't have any reference at all it is a series stream). But I am glad you have re-read my posts and aware of this.
Strange you say you have checked your source and seems to have /series/ in your urls.

Like I always say, its a lot easier and a lot quicker if people have specific provider problems to just trust me with your line details via private message.
Then I can debug exactly what the reason/fault is with out having to go through a slow back and forth conversation.

Display More

@ Kiddac

Thanks I'll PM you my line ... I take it you need it COMPLETE (ie with provider and password details??)

Cheers,

Nitemare

Hi Kiddac,

Recently introduced to your IPTV Maker and very good it is too!

However, I can't seem to populate my TV Shows (Series) bouquets? My provider does have the word SERIES in each appropriate line (which i read earlier in this thread to check).

I also tried to extend the server time out function but as yet I've had no success with Series lines on my m3u file?

Any idea yourself (or anyone) on how to remedy this please?

Thank-you,

Nitemare.

Hi Lululla ...

I have a M3U file on my PC which I was usually able to import direcly (and STILL can on Version 4!) but on V22 I can't!!

When I do input the URL for access to the M3U file provided to me then I get an Error 400 that I "can't access the server!"!?

Also V22 wiped out ALL of my Marker Names on each of my Bouquets!!??

Unfortunately for me at least I'm sticking with V4 for now as it STILL works 100% and even allows me to reset the Stream Reference to the "Null" standard of 4097.0.0.0.0.0.0, which I can't with V22 or for that matter V20??

I'd love to use the NEW V22 as it obviously does add some other features over V4 but as stated I do find it as user friendly (at least to me)!

I'd be very willing to assist to resolve any issues.

Thanks,

Nitemare

I've also tried V22 but I can't load my M3U file like I did with V20 and the older V4!

Indeed V4 was (for me at least) the most "user friendly" version! Think I'll revert back to it!!

The "HUB" in V22 is far too complicated and convuluted!!

Hi,

Managed to get all clearing EXCEPT:

CHANNEL 5 HD

CBBC HD

Any working PIDS' please??

(PS Tried above 27W PDF and original listing on post #1 but no joy)

Thanks.