i tried that i have just noticed that it seem to be my cache exchnage users thats in the log i edited user names out
####-cachex
2015/01/03 09:36:48 211EA50 c add client job action 27 queue length 3 cacheex13
2015/01/03 09:36:48 211EA50 c add client job action 27 queue length 0 cache12
2015/01/03 09:36:48 211EA50 c add client job action 27 queue length 0 nr#####
i did read somthing from over a year ago about mem leak but dont no if this is it or how to fix
can anyone tell me why im getting this in log im running oscam 1.20 r10116 on ubuntu
log is just full of this i have tried to google it but theres not that much on it i also tried a few other revisions of oscam
c [OSCAM-WORK] new event 1 occurred on fd 16 after 0 ms inactivity
2015/01/03 09:36:48 211EA50 c add client job action 27 queue length 2 ####-cachex
2015/01/03 09:36:48 211EA50 c add client job action 27 queue length 3 cacheex13
2015/01/03 09:36:48 211EA50 c add client job action 27 queue length 0 cache12
2015/01/03 09:36:48 211EA50 c add client job action 27 queue length 0 nr#####
2015/01/03 09:36:48 211EA50 c [OSCAM-WORK] new event 1 occurred on fd 16 after 5 ms inactivity
im trying to setup a ftp server so my amiko mini hd combo can just connect and update from it for me and a couple of friends
heres where im at ftp server is up and running fine me and any i give access to can log in and see files
but when i put the ftp line in amiko it says connection to server to get filr list please wait then after about a min says file not found is there somthing im doing wrong
Hi everyone,
Hoping someone can help me out here. Just got the mini combo for use with VM but cannot get it to work no matter which frequencies and QAM etc I try. I already own a dreambox dm500c and have tried copying the settings etc but to no avail. This is my second night at it. In the installation screen for cable install i'm showing no signal no matter what I enter. My line works fine in my DM500C so just don't know. Has anyone any experience in the cable side of things? I'm in the Belfast area BTW. The sat side works fine I just downloaded firmware and channel list from the site and it's all good. Is there anyway of copying a cable.xml file to the box as I have a brute force scan for UK? Also, the receiver is a combo but I don't suppose that you can run sat/and cable at the same time?
Thanks.
add transponder 171.0 6952 tick NIT and scan
then after scanning do a blind scan should bring most if not all in
also getting by not found
linux ubuntu server i use and the configs for e2 and no cacheex
[reader]
label = ***uk
protocol = pcsc
device = 0
caid = 0963
#ecmwhitelist = 0963:AA,AC,AD,AE,A0,BC,BF,EA,EC,E2,F0,FC,FD,A1,A2,A3,A4,A5,A6,A7,A8,A9,B0,B1,B2,B3,B4,B6,B7,B9,BA,C1,C3,C4,C7,C8,C9,D2,DC,D4,D5,D8,E4,1B,1C,1E,14,15,18,19,2A,2B,2D,2E,2F,20,24,26,28,3A,3B,3E,3D,3F,30,32,33,34,35,36,37,38,39,3C,4A,4B,4C,4D,4E,4F,40,41,42,43,44,45,46,47,48,49,5A,5C,5D,5E,5F,50,51,52,53,54,56,57,58,59,6A,6B,6C,6D,6E,6F,60,61,62,63,64,65,66,67,68,69,7A,7B,7C,7D,7E,7F,70,71,72,73,74,76,77,78,79,8A,8B,8C,8D,8F,80,81,82,84,85,89,9A,9B,9C,9D,9E,9F,90,91,92,93,94,96,98,99
detect = cd
mhz = 600
cardmhz = 600
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
its not paired and it seems to only time out when it carnt find it in cache its doing it on disney sd at moment its random as somtimes it gets it off card but most of the time it just times out
linux ubuntu server i use and the configs for e2 and no cacheex
forgot Version: oscam-1.20-unstable_svn-r9086
also tried older versions but with no luck
can some1 look at my config and see if they can see anything that would give timeout and i no i have it in local
[global]
logfile = /var/log/oscam.log
fallbacktimeout = 300
nice = -19
maxlogsize = 30000
waitforcards_extra_delay = 0
preferlocalcards = 1
dropdups = 1
failbantime = 1440
failbancount = 5
[cache]
delay = 10
max_time = 8
wait_time = 0963@000000:100
cwcycle_check_enable = 1
cwcycle_check_caid = 0963
cwcycle_maxlist = 2000
[newcamd]
port = 20000@0963:000000
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
key = 0102030405060708091011121314
keepalive = 1
as title say i was wondering if any of the sly hd box dont use the new pairing system as i need to activate my new ie card and dont want the new pairing on it
even if theres the slights thing ill give it a go
my server is a pc running ubuntu 12.04
oscam version 8886 1.20
ever 10 to 15min i get a pause for upto 10 sec i also use cacheex 3
i have posted my conf if someone sees out that needs changing that will help could they please let me no thanks
[global]
logfile = /var/log/oscam.log
clienttimeout = 1400
fallbacktimeout = 800
nice = -19
maxlogsize = 30000
waitforcards_extra_delay = 0
preferlocalcards = 1
dropdups = 1
lb_save = 500
lb_savepath = /usr/local/sta
ecmfmt = c & p / i / s / l: h
failbantime = 1440
failbancount = 5
[anticasc]
enabled = 1
numusers = 1
samples = 5
aclogfile = /var/log/oscam_ac.log
fakedelay = 1000
denysamples = 4
[cache]
max_time = 9
max_count = 5000
wait_time = 0963@000000:150
csp_allow_request = 0
[newcamd]
port = 20000@0963:000000
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
key = 0102030405060708091011121314
keepalive = 1
[cccam]
port = 10012
nodeid = 0BEEE2F2104F1560
version = 2.3.0
reshare = 2
[webif]
httpport = 8888
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
[reader]
label = ***uk
protocol = pcsc
device = 0
caid = 0963
ecmwhitelist = 0963:AA,AC,AD,AE,A0,BC,BF,EA,EC,E2,F0,FC,FD,A1,A2,A3,A4,A5,A6,A7,A8,A9,B0,B1,B2,B3,B4,B6,B7,B9,BA,C1,C3,C4,C7,C8,C9,D2,DC,D4,D5,D8,E4,1B,1C,1E,14,15,18,19,2A,2B,2D,2E,2F,20,24,26,28,3A,3B,3E,3D,3F,30,32,33,34,35,36,37,38,39,3C,4A,4B,4C,4D,4E,4F,40,41,42,43,44,45,46,47,48,49,5A,5C,5D,5E,5F,50,51,52,53,54,56,57,58,59,6A,6B,6C,6D,6E,6F,60,61,62,63,64,65,66,67,68,69,7A,7B,7C,7D,7E,7F,70,71,72,73,74,76,77,78,79,8A,8B,8C,8D,8F,80,81,82,84,85,89,9A,9B,9C,9D,9E,9F,90,91,92,93,94,96,98,99
detect = cd
mhz = 600
cardmhz = 600
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 300
after all this messing around phoned the shop where i bought the card from and he tells me setanta have turned all the 12m prepaid cards off and when i asked about a refund he just hung up
only got the card in april so theres £350 down the drain thanks for all the help anyway
just to add i tried cccam only and it give ecm speed but black sceen only on setanta sports1 setanta sports it doesnt even try and clear
here are my config if some1 could have a look and make sure there ok as i usualy only use dm800 for viewing
# dvbapi configuration
#
P: 0963:000000
[global]
logfile = stdout
nice = -1
preferlocalcards = 1
saveinithistory = 1
[monitor]
hideclient_to = 15
appendchaninfo = 0
[newcamd]
port = 12000@0963:000000;12001@0963:000000
key = 0102030405060708091011121314
[cccam]
port = 11100
forward_origin_card = 1
version = 2.0.11
nodeid = 1D33401C10C813B8
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = localuser
[webif]
httpport = 8888
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.100,192.168.1.2-192.168.1.100,192.168.2.2-192.168.2.100
[account]
user = localuser
pwd =
group = 1
monlevel = 0
au = reader1
[reader]
label = reader1
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
caid = 0963
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
it has always updated in oscam pc server and never had a problem with it only last sat noticed it not working the logs i put up were off the dm800 i have put it in to try and update it like thatfellow said no luck upto now
can i ask what channel do you use to update your card i have left it on *** 1 for the past day i do have sly box but dont want to put the card in it
lb wasnt enabled on that server as the card only has setanta ireland nothing else so i dint think there was a need
whats the best way to force an update to the card
il give it a try and see if it works
setanta sports doesnt clear and that hasnt changed c7a7
i have had setanta card running in a pc server for ages now never had a problem until last week when it stoped reading it
all the Entitlements are there and upto date but when i ask it to clear the channel i get the following
2013/09/24 18:06:35 5A0938 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2013/09/24 18:06:35 5A0938 r Error processing ecm for caid 0963, srvid C7A8 (servicename: Setanta Sports 1) on reader slot1.
2013/09/24 18:06:35 5A9E00 c jj (0963&000000/C7A8/65:930C): not found (0 ms) by slot1 (of 1 avail 1
i have not had the card in the *** reciver so it has not had the new pairing system implomented
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] slot1 card detected
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] type: VideoGuard B***B (0963)
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] tier: 0003, expiry date: 2013/11/04-00:00:00
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] tier: 000b, expiry date: 2013/11/04-00:00:00
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] tier: 001d, expiry date: 2013/11/04-00:00:00
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] tier: 2590, expiry date: 2013/10/13-00:00:00
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] tier: b765, expiry date: 2013/10/13-00:00:00
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] tier: b766, expiry date: 2013/10/13-00:00:00
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] tier: b772, expiry date: 2013/10/13-00:00:00
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] tier: b773, expiry date: 2013/10/13-00:00:00
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] tier: b860, expiry date: 2013/11/04-00:00:00
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] tier: b8bb, expiry date: 2013/11/04-00:00:00
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] tier: b8bf, expiry date: 2013/11/04-00:00:00
2013/09/24 18:08:45 5A0938 r [videoguard2-reader] tier: b8f9, expiry date: 2013/11/04-00:00:00
2013/09/24 18:08:46 55ED90 s init for all local cards done
anyone no how to get it back on i dont want to put it back in reciver as it might add the new pairing to it
