hello
plz haw i create a vpn connection for my ubuntu server 12.10 64 bit cards shearing
and haw to configur ?
thahk you for a tips
plz any advice ?
hello
plz haw i create a vpn connection for my ubuntu server 12.10 64 bit cards shearing
and haw to configur ?
thahk you for a tips
plz any advice ?
plz can you tel me haw to setup and install oscam files on dreambox dm 600 pvr to be a chearing server ?
this is the files on the attachments:
tel me plz if it is the good one ?
i know i have to go to var/tuxbox/config and i put the file ?
if i put the file on zip i cant open if i unzipit i have 6 files i canot put the on config i tray to change the permison sam problem :(
plz mor help thank you
hello
i like to know if it is possibol to use and configur a 2 jsc one is i***** and one viacsses on the sam server if yes plz any special config if no whay ?
thank you
thank you master G but i dont have Oscam files install can you or do you have link fot that plz ?
sorry i find the file oscam i cant open it i change the permesion steel no good ?
anny advice thank you
ok but where to put all that in witch files plz ?
it is dm600 pvr
after changing som config i have this message :
2013/04/16 11:39:46 1CEACD0 r aljazirasport1 [mouse] ERROR: Opening device 002:008 (errno=2 No such file or directory)
i did verifid all numbers on the bus usb
Bus 002 Device 008: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
0x1ceacd0 r 2 aljazirasport1 ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:52:28 UNKNOWN (no entitlements)
i change usb port sam message ?
plz som advice thank you
ok
pn witch files i put all that plz ?
### oscam.server ###
[reader]
label = JSC
Protocol = internal
detect = CD
device = /dev/sci0
Group = 1
EMMCache = 1,3,2
CAID = 0500
[ad#googlemini]
### oscam.conf ###
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
saveinithistory = 1
PreferLocalCards = 1
[newcamd]
Key = 0102030405060708091011121314
Port = 34000@0500:042400
[webif]
httpport = 16002
httpuser = root
httppwd = xxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
### oscam.user ###
[account]
user = jsc
pwd = jsc
group = 1
AU = JSC
what cards you using ans show your config
i have one user lik this F: test test 3 1 1 {0:0:1} { } { } so it save signal for me like this protocal:
2013/04/15 23:08:29 21A32F0 r aljazirasport [i*****] cccam emmtype=shared, len=63, idx=13, cnt=1: written (121 ms)
2013/04/15 23:08:37 21AF960 c cccam (0603&000000/0004/20F9/3C:AFA7): found (145 ms) by aljazirasport
2013/04/15 23:08:46 21AF960 c Successfully added EMM to /usr/local/etc/aljazirasport_emm.log.
2013/04/15 23:08:46 21AF960 c Successfully added binary EMM to /usr/local/etc/aljazirasport_emm.bin.
but the config you send is for dream box as a server ?
thank you
i have the i***** working fine on the server i weil live that like that
can you send me the config for my dreambox 600 pvr to be like a server for the viacsses jsc plz ?
thank you for your time :)
hello to all
plz i am traying to configur 2 cards one is jsc i***** and the ather is jsc viacsess on the sam server :ubuntu 12.10 64 bit CCcamOscam
only the i***** work fine the ather show error activating card :
this my config:
oscam.conf
[global]
logfile = /dev/null
disablelog = 1
disableuserfile = 1
usrfileflag = 1
clienttimeout = 3500
fallbacktimeout = 3500
nice = -1
maxlogsize = 256
waitforcards = 0
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 4
lb_save = 100
resolvegethostbyname = 1
[webif]
httpport = ******
httpuser = *******
httppwd = ***********
httprefresh = 5
#httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
#httpallowed = 127.0.0.1,192.168.0.0-192.168.254.254
httpdyndns = **************.no-ip.org
httpallowed = 0.0.0.0-255.255.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
httpjsicons = 1
oscam.user
[account]
user = cccam
pwd = cccam
group = 1
monlevel = 4
au = 1
caid = 0603
ident = 0603:000000
#cccreshare = 2
[account]
user = cccam1
pwd = cccam1
group = 1
monlevel = 4
au = 1
caid = 0500
ident = 0500:042400
#cccreshare = 2
oscam.server
[reader]
label = aljazirasport
description = ALJAZIRASPORT
protocol = smartreader
device = 002:006
caid = 0603
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
ident = 0603:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
[reader]
label = aljazirasport1
description = ALJAZIRASPORT1
protocol = smartreader
device = 002:007
caid = 0500
boxkey = 1122334455667788
detect = cd
mhz = 368
cardmhz = 368
ident = 0500:042400
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
plz help thank you
hello
plz i like to shear my card with friend of mine and i like to know haw to creat N:LINE for hem anc the config to add to my files ?
thank you
JSC 1 i***** and 1 viacsess
thanks do you have config for that plz ?
Hello
thank you master g
i have 2 cards jsc 1i***** and 1 viacsess can i mak the work togethers on my server ?
If yes how to config thank you
hello
can you tel me witch the config for card jsc viacsses plz ?
thank you
Hello
plz i am of town and i have a problem connecting to my winscp interface
the think i can connect to cccam inf and oscam server
plz hel me why i cant connect with winscp or putty ????????
Hello
can you plz telme haw to configur my server withe monit so i can see if anny problem not resolve to be send via e-mail ?
Thank you
Hello
i like to know if we can used mgcamd on dreambox with server oscamcccam ubuntu if yes plz can you explane where and haw to add clients and haw to create c:line for users ?
Thank you
plz haw i create C:line for user it is the same on cccam ( C: dyndns port user pass ) ?