cant get it to work on blackhole 3.0.3H vusolo2.gcam status giving error too
Posts by ishara
-
-
well that was short lived. this morning all the symptoms have returned.i havent changed anything my end.odd
-
wow just changed channels and-all ok again no pixellation and clear picture like the rest i wonder what happenned.and now i have ordered new reel of 50m cable due to arrive monday!
-
on vosolo2 sat finder snr is 73-84 jumping back and forth
agc is 95 constant
lock is green/red jumping from green to red back and forth not constant
-
hi just done some more measurements.on the 11656 freq. quality 20 odd to 40 ish changing too quickly to see properly. poor picture pixellating
showcase channel quality 58% freq.11598v picture good
1tv channel 10906v 70% quality picture good
-
thankyou for reply.i have ultra black twin lnb about 9 monthas old from new.so i dont know if they can fail that quickly.i have now ordered fresh length of 50m reel cable and try if that fixes the problem.dish is a bit high so not easy to get to.
-
thanks for reply. yes i have used the coupler you mentioned as above,two of them.but what i cant undrestand is why channels on this frequency only.all other channels on other frequency are ok.is this frequency on low power(11656v 22000)
-
could be what you say. i have extended the cable in doing so had to use two f plugs that is
made two joins in the cable that may be problem,cable is probably near 35- 40 metres in length.i might get another length of cable and take out all connectors and have just one single length,that may help.i am using motorised set up 1,1cm dish and moteck ii drives the dish
-
yes signal is 80% all other transpnders ok
-
so basically all are like this on this transponder
-
for me still pixelation even free to air channel & tv
-
just started a couple of days ago and and different emu still same.its like sat being out of line or lost its postion.so far its zee tv,zee punjabi,&tv which is fta all on 11656v 28e.when fta is glitching aswell it cant be number of people thing can it?
-
could they be taking the feed from 19e instead ?
-
im getting picture freeze and breakup on this transponder any one else have problem like me
-
-
i was just looking at zee tv ones and some on 16e that i know of.i have vusolo2 blackhole image
-
why some channels breaking up?
-
is it possible to see - freq... s/r ... p fec
107... 220... H 5/6 not like this but
like this 10714 22000 H 5/6 in dreamset edit settings window? it was possible a while back but not now,wheather due to your settings or the dreamset editor version i dont know
-
i have this problem and clck on item and it clears so its visible.must be a bug o sorts?
-
&tv hd not opening on 28e .some indian channels on 19e not opening could be encryption.sky cinema etc opening ok
