Posts by kikan

hello,

i had to reinstall all . because of SDcard problem...

now with last raspberry pi image and fresh installation i have faster response time..
before 135ms now 105ms...

agen very good tutorial :20_003:
thanks..
by
kikan

Hi to all,

I have a problem and i don't know how to found solution.
I have vu+duo and cccam+oscam4856.
Yesterday a tried to connect my tivusat card, that is activated and make it work, but something is not wright.
can maybe someone tell me what is wrong?
I tried different versions and oscam.configs for tivusat, but channels are not visible.
Mybe is this error, but i cant found how to fixit..at the end the card is visible etc..
''ERROR in IO_Serial_Read errno=0''

Thank you very much for help

this is my oscam.server file.
this is my log file after i start oscam.
i insert a N line in my cccam...

[reader]
enable = 1
label = tivsat
protocol = internal
Device = /dev/sci0
Group = 1
caid = 183d
emmcache = 1,1,2
ecmcache = 1
cardmhz = 368
mhz = 368
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF 6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4 F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD 84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD 86B595B366C35716ABC91FA3DC159C9F4D8164B5

Logfile:
1970/01/01 1:00:43 77106000 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4856 (mips-tuxbox-linux)
1970/01/01 1:00:43 77106000 s version=1.00-unstable_svn, build #4856, system=mips-tuxbox-linux, nice=-1
1970/01/01 1:00:43 77106000 s client max. idle=120 sec, debug level=0
1970/01/01 1:00:43 77106000 s max. logsize=2000 Kb
1970/01/01 1:00:43 77106000 s client timeout=30000 ms, fallback timeout=2500 ms, cache delay=120 ms
1970/01/01 1:00:43 77106000 s auth size=5008
1970/01/01 1:00:43 77106000 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
1970/01/01 1:00:43 77106000 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
1970/01/01 1:00:43 77106000 s signal handling initialized (type=sysv)
1970/01/01 1:00:43 77106000 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
1970/01/01 1:00:43 77106000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
1970/01/01 1:00:43 77106000 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
1970/01/01 1:00:43 77106000 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) i***** guessing not loaded
1970/01/01 1:00:43 77106000 s monitor: disabled
1970/01/01 1:00:43 77106000 s camd33: disabled
1970/01/01 1:00:43 77106000 s camd35: disabled
1970/01/01 1:00:43 77106000 s cs378x: disabled
1970/01/01 1:00:43 77106000 s newcamd: initialized (fd=10, port=34000, crypted)
1970/01/01 1:00:43 77106000 s CAID: 183D
1970/01/01 1:00:43 77106000 s provid #0: 005411
1970/01/01 1:00:43 77106000 s newcamd: initialized (fd=11, port=50001, crypted)
1970/01/01 1:00:43 77106000 s CAID: 093B
1970/01/01 1:00:43 77106000 s provid #0: 000000
1970/01/01 1:00:43 77106000 s newcamd: initialized (fd=12, port=50002, crypted)
1970/01/01 1:00:43 77106000 s CAID: 1805
1970/01/01 1:00:43 77106000 s provid #0: 008D11
1970/01/01 1:00:43 77106000 s cccam: disabled
1970/01/01 1:00:43 77106000 s radegast: disabled
1970/01/01 1:00:43 77106000 s http thread started
1970/01/01 1:00:43 77106000 s creating thread for device /dev/sci0
1970/01/01 1:00:43 77106000 s loadbalancer: can't read from file /tmp/.oscam/stat
1970/01/01 1:00:43 77106000 s anti cascading disabled
1970/01/01 1:00:43 766DF4B0 h HTTP Server listening on port 1800
1970/01/01 1:00:43 75EDF4B0 r reader thread started (thread=75EDF4B0, label=tivsat, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
1970/01/01 1:00:43 75EDF4B0 r tivsat card detected
1970/01/01 1:00:43 756DF4B0 c client connected to 34000 port
1970/01/01 1:00:43 756DF4B0 c encrypted newcamd:34000-client 127.0.0.1 granted (kixx, au=auto (1 reader))
1970/01/01 1:00:43 756DF4B0 c user kixx authenticated successfully (CCcam)
1970/01/01 1:00:43 756DF4B0 c AU disabled for user kixx
2013/09/11 7:12:47 75EDF4B0 r ERROR in IO_Serial_Read errno=0
2013/09/11 7:12:47 75EDF4B0 r ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2013/09/11 7:12:48 75EDF4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2013/09/11 7:12:49 75EDF4B0 r detect nagra tiger card
2013/09/11 7:12:50 75EDF4B0 r type: NAGRA, caid: 183D, IRD ID: FE AE 12 70
2013/09/11 7:12:50 75EDF4B0 r ProviderID: 00 00 54 11
2013/09/11 7:12:50 75EDF4B0 r found cardsystem nagra
2013/09/11 7:12:50 75EDF4B0 r ROM: T I G E R 0 0 3
2013/09/11 7:12:50 75EDF4B0 r REV: R e v 2 5 0
2013/09/11 7:12:50 75EDF4B0 r SER: 41 1D BF EA
2013/09/11 7:12:50 75EDF4B0 r CAID: 183D
2013/09/11 7:12:50 75EDF4B0 r Prv.ID: 00 00 54 11 (sysid)
2013/09/11 7:12:50 75EDF4B0 r Activation Date : 01/01/2009
2013/09/11 7:12:50 75EDF4B0 r Expiry Date : 31/12/2099
2013/09/11 7:12:50 75EDF4B0 r [nagra-reader] ready for requests
2013/09/11 7:12:51 756DF4B0 c Connection closed to client
2013/09/11 7:12:51 756DF4B0 c kixx disconnected from 127.0.0.1
2013/09/11 7:12:51 756DF4B0 c thread 756DF4B0 ended!
2013/09/11 7:12:51 74ECF4B0 c client connected to 34000 port
2013/09/11 7:12:51 74ECF4B0 c encrypted newcamd:34000-client 127.0.0.1 granted (kixx, au=auto (1 reader))
2013/09/11 7:12:51 74ECF4B0 c user kixx authenticated successfully (CCcam)
2013/09/11 7:12:51 74ECF4B0 c AU enabled for user kixx on reader tivsat
2013/09/11 7:13:08 74ECF4B0 c kixx (183D&005411/0002/91:AF12): not found (527 ms) by tivsat (of 1 avail 1)

o.k thank you very much.
by
kikan

Quote from musogeek

Not saying you can't use smargo reader, just I have never had one apart from the triple reader which didn't work properly in Oscam. As I said for help with your card configs please post in the correct section. This is the raspberry pi section.

Thank you for replay,

i use smargo, because i your guide you use smargo...
''Then create the following symbolic link so Smartreader support is added during the compile;''
''and move the list_smargo tool;''
,
the error in oscam, that i have is the same that i receive from oscam on may PI. is not image related i think.

do you know, where can i found working osam files for tivusat card?maybe i have set up something wrong.

thank you
by
kikan

Quote from musogeek

kikan I have never tried the smargo - I once had the triple card reader, I couldn't get it to work in oscam only CCcam so I would stay away from it. It is cheaper to get a powered USB hub and 3 omnikey readers. I would always suggest omnikey for an oscam server as these are easy to get going. I cannot comment on djkage's script as I have never used it.

The rest of your question relates to a server on Vu+ Duo so you need to post it in the relevant cardsharing support section so someone who is familiar with that provider will be able to help.

Hi to all,

after 6 months , i can tell that this is working very nicely. I'm using 8 users and there are no freezes...almost never.
I manage to not reboot my raspberry from first day, its hook up with small ups and now is running without restart for more than 6 months.
I read last post, that after connecting 14 or more users it starts to freeze?...
i was thinking to add one more smargo smartreader for my tivusat card.
what about Argolis Triple Reader. i know that PI have only 100mA per port, do i need power for this triple card reader, and do i have to install different drivers for Argolis Triple Reader?Yesterday a tried to make it work on vu+duo with cccam213+oscam4856 build and i have this error.
can maybe someone tell me what is wrong.
Last question is if do we need this script.If i understand correctly this will update last oscam automaticly from oscam server.

Thank you very much for help
AND THANK YOU FOR THIS VERY GOOD TUTORIAL...
by kikan

this is my osam.server file.
this is my log file after i start oscam.

[reader]
enable = 1
label = tivsat
protocol = internal
Device = /dev/sci0
Group = 1
caid = 183d
emmcache = 1,1,2
ecmcache = 1
cardmhz = 368
mhz = 368
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5

Logfile:
1970/01/01 1:00:43 77106000 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4856 (mips-tuxbox-linux)
1970/01/01 1:00:43 77106000 s version=1.00-unstable_svn, build #4856, system=mips-tuxbox-linux, nice=-1
1970/01/01 1:00:43 77106000 s client max. idle=120 sec, debug level=0
1970/01/01 1:00:43 77106000 s max. logsize=2000 Kb
1970/01/01 1:00:43 77106000 s client timeout=30000 ms, fallback timeout=2500 ms, cache delay=120 ms
1970/01/01 1:00:43 77106000 s auth size=5008
1970/01/01 1:00:43 77106000 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
1970/01/01 1:00:43 77106000 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
1970/01/01 1:00:43 77106000 s signal handling initialized (type=sysv)
1970/01/01 1:00:43 77106000 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
1970/01/01 1:00:43 77106000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
1970/01/01 1:00:43 77106000 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
1970/01/01 1:00:43 77106000 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) i***** guessing not loaded
1970/01/01 1:00:43 77106000 s monitor: disabled
1970/01/01 1:00:43 77106000 s camd33: disabled
1970/01/01 1:00:43 77106000 s camd35: disabled
1970/01/01 1:00:43 77106000 s cs378x: disabled
1970/01/01 1:00:43 77106000 s newcamd: initialized (fd=10, port=34000, crypted)
1970/01/01 1:00:43 77106000 s CAID: 183D
1970/01/01 1:00:43 77106000 s provid #0: 005411
1970/01/01 1:00:43 77106000 s newcamd: initialized (fd=11, port=50001, crypted)
1970/01/01 1:00:43 77106000 s CAID: 093B
1970/01/01 1:00:43 77106000 s provid #0: 000000
1970/01/01 1:00:43 77106000 s newcamd: initialized (fd=12, port=50002, crypted)
1970/01/01 1:00:43 77106000 s CAID: 1805
1970/01/01 1:00:43 77106000 s provid #0: 008D11
1970/01/01 1:00:43 77106000 s cccam: disabled
1970/01/01 1:00:43 77106000 s radegast: disabled
1970/01/01 1:00:43 77106000 s http thread started
1970/01/01 1:00:43 77106000 s creating thread for device /dev/sci0
1970/01/01 1:00:43 77106000 s loadbalancer: can't read from file /tmp/.oscam/stat
1970/01/01 1:00:43 77106000 s anti cascading disabled
1970/01/01 1:00:43 766DF4B0 h HTTP Server listening on port 1800
1970/01/01 1:00:43 75EDF4B0 r reader thread started (thread=75EDF4B0, label=tivsat, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
1970/01/01 1:00:43 75EDF4B0 r tivsat card detected
1970/01/01 1:00:43 756DF4B0 c client connected to 34000 port
1970/01/01 1:00:43 756DF4B0 c encrypted newcamd:34000-client 127.0.0.1 granted (kixx, au=auto (1 reader))
1970/01/01 1:00:43 756DF4B0 c user kixx authenticated successfully (CCcam)
1970/01/01 1:00:43 756DF4B0 c AU disabled for user kixx
2013/09/11 7:12:47 75EDF4B0 r ERROR in IO_Serial_Read errno=0
2013/09/11 7:12:47 75EDF4B0 r ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2013/09/11 7:12:48 75EDF4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2013/09/11 7:12:49 75EDF4B0 r detect nagra tiger card
2013/09/11 7:12:50 75EDF4B0 r type: NAGRA, caid: 183D, IRD ID: FE AE 12 70
2013/09/11 7:12:50 75EDF4B0 r ProviderID: 00 00 54 11
2013/09/11 7:12:50 75EDF4B0 r found cardsystem nagra
2013/09/11 7:12:50 75EDF4B0 r ROM: T I G E R 0 0 3
2013/09/11 7:12:50 75EDF4B0 r REV: R e v 2 5 0
2013/09/11 7:12:50 75EDF4B0 r SER: 41 1D BF EA
2013/09/11 7:12:50 75EDF4B0 r CAID: 183D
2013/09/11 7:12:50 75EDF4B0 r Prv.ID: 00 00 54 11 (sysid)
2013/09/11 7:12:50 75EDF4B0 r Activation Date : 01/01/2009
2013/09/11 7:12:50 75EDF4B0 r Expiry Date : 31/12/2099
2013/09/11 7:12:50 75EDF4B0 r [nagra-reader] ready for requests
2013/09/11 7:12:51 756DF4B0 c Connection closed to client
2013/09/11 7:12:51 756DF4B0 c kixx disconnected from 127.0.0.1
2013/09/11 7:12:51 756DF4B0 c thread 756DF4B0 ended!
2013/09/11 7:12:51 74ECF4B0 c client connected to 34000 port
2013/09/11 7:12:51 74ECF4B0 c encrypted newcamd:34000-client 127.0.0.1 granted (kixx, au=auto (1 reader))
2013/09/11 7:12:51 74ECF4B0 c user kixx authenticated successfully (CCcam)
2013/09/11 7:12:51 74ECF4B0 c AU enabled for user kixx on reader tivsat
2013/09/11 7:13:08 74ECF4B0 c kixx (183D&005411/0002/91:AF12): not found (527 ms) by tivsat (of 1 avail 1)

Quote from djkage

hello, i finish the script to make update

with putty type:

past the script

ctrl+o for save and ctrl+x for exit

and run it

or setup your webif for run this script

@ musogeek : can you add it to the first post for oscam user who followed your post and a big thank you for your tutorial

Display More

Sorry for late reply...

I'm using smargo card reader and is working very good.

By
kikan

Hi,
I manage to make it work.

I'm using c lines..

Is quick for now, i will check for few days...

by
kikan

thanks for helping me...

quite difficult to set all and make it work..

is possible to connect to oscam from cccam client using C: lines?

Thanks now my smartcard is working but a have other problems.
thisis my oscam status.

cccam: initialized (fd=5, port=12000)
2013/03/06 08:36:31 0 s Tivusat [smartreader] creating thread for device 001:004
2013/03/06 08:36:31 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/03/06 08:36:31 0 s waiting for local card init
2013/03/06 08:36:31 197C80 r Tivusat [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/03/06 08:36:31 1A00E8 h webif: decompressed 50857 bytes back into 150432 bytes
2013/03/06 08:36:31 1A00E8 h HTTP Server listening on port 8181
2013/03/06 08:36:31 197C80 r Found smartreader device 001:004
2013/03/06 08:36:31 197C80 r Tivusat [smartreader] Reader initialized (device=001:004, detect=cd, mhz=368, cardmhz=368)
2013/03/06 08:36:32 197C80 r Tivusat [smartreader] card detected
2013/03/06 08:36:35 197C80 r Tivusat [smartreader] ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2013/03/06 08:36:35 197C80 r Tivusat [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/03/06 08:36:35 197C80 r Tivusat [smartreader] Calculated work ETU is 8.70 us
2013/03/06 08:36:35 197C80 r Tivusat [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/03/06 08:36:36 197C80 r Tivusat [smartreader] detect nagra tiger card
2013/03/06 08:36:37 197C80 r Tivusat [smartreader] card system not supported
2013/03/06 08:36:37 197C80 r Tivusat [smartreader] Normal mode failed, reverting to Deprecated Mode
2013/03/06 08:36:40 197C80 r Tivusat [smartreader] ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2013/03/06 08:36:40 197C80 r Tivusat [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/03/06 08:36:40 197C80 r Tivusat [smartreader] Calculated work ETU is 100.81 us
2013/03/06 08:36:40 197C80 r Tivusat [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/03/06 08:36:41 197C80 r Tivusat [smartreader] detect nagra tiger card
2013/03/06 08:36:42 197C80 r Tivusat [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/03/06 08:36:43 197C80 r Tivusat [smartreader] T1 Resync command error, trying to reactivate!
2013/03/06 08:36:46 197C80 r Tivusat [smartreader] ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2013/03/06 08:36:46 197C80 r Tivusat [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/03/06 08:36:46 197C80 r Tivusat [smartreader] Calculated work ETU is 8.67 us
2013/03/06 08:36:47 197C80 r Tivusat [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/03/06 08:36:47 197C80 r Tivusat [smartreader] card system not supported
2013/03/06 08:36:47 197C80 r Tivusat [smartreader] card initializing error
2013/03/06 08:36:47 0 s init for all local cards done
2013/03/06 08:36:47 0 s anti cascading disabled
2013/03/06 08:36:47 1A7798 c anonymous disconnected from 192.168.10.24
2013/03/06 08:36:47 1A5FE8 c client connected to 34000 port
2013/03/06 08:36:47 1A5FE8 c anonymous disconnected from 192.168.10.24
2013/03/06 08:36:52 1AADB8 c client connected to 34000 port
2013/03/06 08:36:52 1AADB8 c encrypted newcamd:34000-client 192.168.10.24 granted (tivu, au=on (1 reader))
2013/03/06 08:36:52 1AADB8 c user tivu authenticated successfully (CCcam)
2013/03/06 08:36:52 1AADB8 c AU disabled for user tivu
2013/03/06 08:36:56 1AC970 c encrypted cccam-client 192.168.10.24 granted (nagra, au=auto (1 reader))

ttyUSB0

o.k. thanks

thank you for helping me.

Yes i have smargo in one of two USB in raspi.

how to reflect this

this is what i'm was using in dreambox

[reader]
Label = ***IT
Protocol = internal
Detect = CD
Device = /dev/sci0
group = 1
emmcache = 1,1,0
boxid = ******
blocknano = all
mhz = 368
cardmhz = 368
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
blockemm-bylen = 183,81

Hi,
i'm trying to install osacm on my raspberry pi.
I'm new in this, so please be nice with me...

i install everything like in this post.

when i connect to my oscam vie http i have this erros.

I0m would like to use my nds *** italy card.
i would like that my nds card is on raspberry pi with oscam, and that i can connect to it witm my dreambox, where i0m using cccam.

i was using cccam +oscam on drem and i have cccam.cfg with all users inside.
I read that i have to port all this users in oscam.users file? its this true.
Do i have to use my old oscam files that i was using in dreambox with cccam?
How can i connect cccam client to my oscam only raspberry pi server?

this is my oscam log file. If i insert my nds card in smargo i did not see anything.
2013/03/06 01:59:21 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8480 (arm-linux-gnueabihf)
2013/03/06 01:59:21 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2137
2013/03/06 01:59:21 0 s userdb reloaded: 25 accounts loaded, 0 expired, 0 disabled
2013/03/06 01:59:21 0 s signal handling initialized
2013/03/06 01:59:21 0 s camd35: initialized (fd=5, port=35000)
2013/03/06 01:59:21 0 s newcamd: initialized (fd=6, port=35000)
2013/03/06 01:59:21 0 s -> CAID: 09CD PROVID: 000000
2013/03/06 01:59:21 0 s ***IT [internal] creating thread for device /dev/sci0
2013/03/06 01:59:21 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/03/06 01:59:21 0 s waiting for local card init
2013/03/06 01:59:21 1750F60 r ***IT [internal] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2013/03/06 01:59:21 1750F60 r ***IT [internal] Cannot open device: /dev/sci0
2013/03/06 01:59:21 1777D48 h webif: decompressed 50857 bytes back into 150432 bytes
2013/03/06 01:59:21 1777D48 h HTTP Server listening on port 8181
2013/03/06 02:00:21 1750F60 r ***IT [internal] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2013/03/06 02:00:21 1750F60 r ***IT [internal] Cannot open device: /dev/sci0
2013/03/06 02:01:21 1750F60 r ***IT [internal] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2013/03/06 02:01:21 1750F60 r ***IT [internal] Cannot open device: /dev/sci0
2013/03/06 02:02:21 1750F60 r ***IT [internal] ERROR: Opening device /dev/sci0 (errno=2 No such file or directory)
2013/03/06 02:02:21 1750F60 r ***IT [internal] Cannot open device: /dev/sci0

This is my oscam.conf
# main configuration

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5 # dodal kikan 27/11/2012
CacheDelay = 120 # dodal kikan 27/11/2012
#LogFile = stdout
logfile = /var/log/oscam.log
maxlogsize = 120
#preferlocalcards = 1
saveinithistory = 1

# monitor

[monitor]
Port = 0
NoCrypt = # Ip allowed to connect dreambox
MonLevel = 4

# protocols

[newcamd]
key = 0102030405060708091011121314
#port = 35000@09CD:000000
port = 35000@09CD:000000

[cs357x]
Port = 35000

#webif

[webif]
httpport = ****
httpuser =****
httppwd = *****
httprefresh= 10
httpallowed = 127.0.0.1,192.168.10.101,192.168.10.33 # Ip allowed to connect dreambox

this is my oscam.server
[reader]
Label = ***IT
Protocol = internal
Detect = CD
Device = /dev/sci0
group = 1
emmcache = 1,1,0
boxid = *******
blocknano = all
mhz = 368
cardmhz = 368
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
blockemm-bylen = 183,81

and this is my oscam.user

[account]
user = ***1
pwd = ***1
monlevel = 4
group = 1
uniq = 0
au = 0
#ident = 09CD:000000
#caid =09cd

[account]
user=****
pwd=*****
group=1
cccmaxhops=5
cccreshare=0

[account]
user=ati
pwd=*****
group=1
cccmaxhops=5
cccreshare=0

[account]
user=mama
pwd=****
group=1
cccmaxhops=5
cccreshare=0

thank you very much
kikan