Hi folks,
Wondering is there a web interface to stream tv channels on spark , like web interface (webif) in enigma2.
Hi folks,
Wondering is there a web interface to stream tv channels on spark , like web interface (webif) in enigma2.
Yes already have the server and login details in the file, I just took them out in my post for security reasons. CWS = <server> 12112 <login> <password> 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan
will do, got it worknng on spark after a reboot. and now re-imaged enigma2 , but still no joy. must be the mgcamd cam I am using is wrong. do you have aink to the one you are using.
I tried these 2 : MGcamd 1.38.c Stable-mips E2 by Leo & e2-mipsel-mgcamd_1.35_100122
Still not working after I changed the G: { 01 } to G: { 33 } in my mg_cfg file.
I switched back to spark (instead of eigma2) to see if I could get it working, but I have no idea how to run mgcamd on spark. Ayone have a dummies guide to ruing mgcamd on spark?
changed the cam to mgcamd_1.35 but still nothing. 1 question, is copying the mgcamd cam file into the directory enough, or do I need to install anything (like a package)?
sorry, let me try to clear that up.
I can use oscam protocol to connect to a 3rd partys cam but it stutters , the 3rd party said I should be using mgcamd instead as I am a client , not a server. However mgcamd does not start for me.
here are some of the details on my setup, in case this helps:
Location of cam protocol
bf943cf92665.png
Location of cam files (Both these locations are listed correctly in my softcam manager.)
0ef5783b6d48b500a590ba3.png
Newcamd.list
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = <server> 12112 <login> <password> 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan
Mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 192.168.1.8 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
Thanks but this was already there and still not starting. Do I need to remove all the Oscam files first?
Hi,
I am accesing someone elses cam server from my enigma2 golden media box and I am using oscam. but it stutters and the cam server guy says it because I should be using Mgcamd. I got the right Mgcamd files and edited newcamd.list with my details. I then select Mgcamd_138 in my softcam manager but nothing starts. I can go back to oscam and oscam starts, but due to the stutter is not much use.
I am sure the files are in the right directory and look ok but can't figure out why it's not working.
so any advice offered is appreciated.