Posts by litek

  • openpli 10.1 dm800se original 20200625

    Hi ! Have install this imige on one of my DM800SE A8P .Works fine but will not install XCPlugin Forever Version / X-Streamity Plugin / Jedi Maker Xstream .

    Do I have to install other file first ? or is it to little space( flash expander )


    Litek :derpthink:

  • XcPlugin Forever Version

    Hi ! tried this version on my DM800SE/800SE v2/Foruler F4 and DM500 CI+ all with Openpli 7.2 and /7.3 ( Japhar sim and orginal. Green screen on every one.

    No problem with XC-Pligin Lite v2.0


    Litek:derpthink:

  • DreamTV Mini UltraHD Android IPTV Streamer

    Hi !

    Have purchased DreamTV and added URL (GenIPTV) into Xtream Server which works great.

    Now trying Enigma2 STB. Added the values to my DM525 CI +. Looks like it is updating source but does not see the channels.

    Do this with the decoding of Sat channels (1) and IPTV (4097 channels).

    Has followed :

    Litek

  • Enigma2 Picons 0.8°W By Dex

    Hi !

    I have downloaded your picons.


    My picons on usb has truktur :


    100x60 picons : /media/usb/picon/.


    50x30 picons : /media/usb/picon_50x30/.



    220x132 picons : /media/usb/picon_220x132/.


    where do I have to add your picons they will not show up ?


    Litek :derpthink:

  • Formuler F4 EPGImport

    Hi!

    Have flashed OpenPli 7.2 on my Formuler F4 and works great.

    Have problems with instaling EPGImport IPK

    Dont shown up after reboot

    Can someone explane my this


    Litek:wtf1:

  • DM520HD : OpenPLi 7.2Star 20191013 GSt 1.17.0.1

    Hi !

    I deleated the firs file and downloaded the file from here :



    Igot the same masage as you .rebooted the box and it start flashing


    Got this masage from the other forum :

    This image is built for DM520HD and DM525HD, and works here on DM525HD (Tested). The install log is NOT important, as it gives some errors on all images, but that are of no importance.


    Litek

  • JediMakerXtream frågor och Svar

    Hei igjen !

    Kan du vise hvordan jeg instalerer gstreamer/extplayer på 800se og 800sev.2 Finner ikke helt ut av det .Har 2 boxer med Openpli sim2.20 kan evt skifte til a8p eller jahar sim.Finner ikke spillerne under feed


    Litek

  • JediMakerXtream frågor och Svar

    Hei igjen !

    Da har jeg lagt inn OpenPli 6.2 på min DM525HDCI+ og JMX 5.16 :her ser det ut som ExtPlayer fungerer best på LiveTV og VOD(Valg 4091/dvb1/Gstreamer eller ExtPlayer

    Kan du legge ut Gstreamer og ExTPlayer for enigma2 så kan jeg prøve dem på andre imiges.Tenker jeg rett så må disse være instalert for å få velge i JMX


    Litek

  • Oscam 1.0 4.7 Gemini Enigma 1

    Oscam 1.0 4.7 Gemini Enigma 1
    Hey!
    Have manuel instal Oscam 1.0 to my Gemini 4.7 to DM7020S.Have picture on CanalDigital but black screen on Viasat.Har Viasat upper reader / CD in the lower reader


    Have the same file DM800Se with OpenPli 2.1 beta, here read both cards with Viasat in the upper reader / CD in the lower reading.
    Someone who sees what is wrong: question:





    Oscam server:


    # Oscam.server generated automatically, by Stream Board OSCAM 1.00-unstable_svn build # 5630
    # Read more: gmc.to - Informationen zum Thema satellite tv. ... scam.server.txt


    [Reader]
    label = lower_canaldigital
    enable = 1
    protocol = internal
    device = / dev/sci0
    detect = cd
    mhz = 500
    cardmhz = 500
    caid = 0B00
    ident = 0B00: 000000
    services =
    group = 1
    emmcache = 1,3,15
    lb_weight = 100
    cccreshare = 3
    audisabled = 0


    # Uncomment and enable this lines below only if devices are presented
    [Reader]
    label = upper_viasat
    enable = 1
    protocol = internal
    device = / dev/sci1
    detect = cd
    mhz = 500
    cardmhz = 500
    caid = 090F
    ecmwhitelist = 090F: 88.84, AA, A6, 68.98
    ident = 090F: 000000
    services =
    boxid = xxxxxxxx (Posted hex here)
    group = 2
    emmcache = 1,3,2
    lb_weight = 100
    cccreshare = 3
    audisabled = 0
    blockemm-g = 1


    # [Reader]
    # Label = smart reader
    # Enable = 0
    # Protocol = mouse
    # Dreambox kernel does not support smart reader protocol so use mouse and set speed with ttyS0 tool
    # For devices with boxes libusb1.0.6 or greater and kernel above 2.6.30 use smart reader
    # Device = / dev/ttyUSB0
    # For smart reader protocol use bus: device
    # Bus: device bus name and device name of the Smart Reader +
    # (Get the names with lsusb 'Bus' and 'Device')
    # Detect = cd
    # Mhz = 600
    # Do not use with mouse do use with smart reader protocol
    # Cardmhz = 600
    # Do not use with mouse do use with smart reader protocol
    # Caid =
    # Ident =
    # Services =
    # Group = 3
    # Emmcache = 1,3,15
    # Lb_weight = 100
    # Cccreshare = 3
    # Audisabled = 0


    # Uncomment and adapt to your needs the readers below this line or ad extra ones.
    # [Reader]
    # Label = pcserverlocalnetwork
    # Enable = 1
    # Protocol = CCcam
    # Device = 192.168.123.9,12000
    # Account = user
    # Password = pasword
    # Reconnecttimeout = 1
    # Group = 5
    # Emmcache = 1,2,15
    # Lb_weight = 100
    # Cccversion = 2.2.1
    # Cccmaxhops = 5
    # Ccckeepalive = 1
    # Cccreshare = 3
    # Audisabled = 0


    # CCcam on it would be a C line like:
    # C: 192.168.123.9 12000 user pasword no {0:0:5}


    # [Reader]
    # Label = remoteccampeer
    # Enable = 1
    # Protocol = CCcam
    # Device = cccam.example.cx, 12925
    # Account = user
    # Password = password
    # Services =! Service1,! Service2
    # (The ignored channel providers or see oscam.services)
    # Reconnecttimeout = 2
    # Group = 12
    # Lb_weight = 100
    # Cccmaxhops = 5
    # Cccreshare = 3
    # Ccckeepalive = 1
    # Audisabled = 1
    # The best is for NOT sending emm's to remote CCcam peers
    # Cccversion = 2.2.1


    # CCcam on it would have been a c line like:
    # C: cccam.example.cx 12925 user password no {0:0:5}