i managed to get oscam up and running but not clearing sports and movies
could it be ecmwhitelist
im running rasp pi with wheezy
this is my config
[reader]
label = ***_uk
protocol = smargo
device = /dev/ttyUSB0
caid = 0963
ecmwhitelist = 0963:3B,3E,41,42,44,45,47,4B,4E,4F,53,54,56,5F,61,62,65,66,67,68,69,6A,6B,6C,6D,6E,6F,70,71,72,73,74,76,77,78,79,7A,7C,7D,7E,80,82,85,8B
detect = cd
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
lb_weight = 101
Posts by clivesmith
-
-
help plz plz. ive done everything on page 1 to the letter
http://linuxsat-support.com/ra…raspberry-pi-scratch.html
everything seems to be working but channels not clear
these are my configs
OSCAM CONFIG
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols[newcamd]
key = 0102030405060708091011121314
port = #####@0963:000000[monitor]
port = ###
nocrypt = 127.0.0.1oscam.server
[reader]
label = ***uk
protocol = smargo
device = /dev/ttyUSB0
caid = 0963
ecmwhitelist = 0963:3E,42,44,45,47,4E,53,54,61,62,68,69,6A,6B,6D, 6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8B
detect = cd
#mhz = 357
#cardmhz = 357
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
dropbadcws = 1
lb_weight = 101
boxid = 12345678
oscam.user
[account]
user = user1
pwd = pass2
group = 1
monlevel = 4
au = ***uk
keepalive = 1ps oscam is showing my box is connected on webin
just checked oscam in webif and i think this is where my problem is
2013/04/13 16:53:51 1C082F0 r ***uk [videoguard2] tier: b773, expiry date: 2013/06/10-01:00:00
2013/04/13 16:53:51 1C082F0 r ***uk [videoguard2] tier: b846, expiry date: 2013/06/10-01:00:00
2013/04/13 16:53:51 1C082F0 r ***uk [videoguard2] tier: b860, expiry date: 2013/06/10-01:00:00
2013/04/13 16:53:51 1C082F0 r ***uk [videoguard2] tier: b8d2, expiry date: 2013/06/10-01:00:00
2013/04/13 16:53:51 1C082F0 r ***uk [videoguard2] tier: b968, expiry date: 2013/06/10-01:00:00
2013/04/13 16:53:51 1C082F0 r ***uk [videoguard2] tier: b991, expiry date: 2013/06/10-01:00:00
2013/04/13 16:53:54 0 s init for all local cards done
2013/04/13 16:53:54 0 s anti cascading disabled
2013/04/13 16:53:54 1C58098 c client connected to 27000 port
2013/04/13 16:53:54 1C58098 c anonymous disconnected from 192.168.0.8
2013/04/13 16:54:03 1C5A588 c client connected to 27000 port
2013/04/13 16:54:03 1C5A588 c encrypted newcamd:27000-client 192.168.0.8 granted (mother2, au=on (1 reader))
2013/04/13 16:54:03 1C5A588 c user mother2 authenticated successfully (CCcam)
2013/04/13 16:54:03 1C5A588 c AU enabled for user mother2 on reader ***uk
2013/04/13 16:54:09 1C5A588 c mother2 (0963&000000/0000/107E/5F:062427F535E3AACBB6EC2E05CFAC0B8F): rejected group (1 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:54:17 1C5A588 c mother2 (0963&000000/0000/107E/5F:E6BF05892DE76CC0E62E0F7B85310EF6): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:54:25 1C5A588 c mother2 (0963&000000/0000/107E/5F:A7E8FE6337CE9C74816D6305A185D169): rejected group (1 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:54:33 1C5A588 c mother2 (0963&000000/0000/107E/5F:FDB66B2C515575DBF651BB548CC03EA7): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:54:40 1C5A588 c mother2 (0963&000000/0000/107D/5F:00933CC4DD1CCE4F796419209EA134D5): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:54:45 1C5A588 c mother2 (0963&000000/0000/107D/5F:71120A15CCA67FB7674ED526CB538BD9): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:54:47 1C5A588 c mother2 (0963&000000/0000/107E/5F:51B3076E54C17AD6A1E1C76680AD186A): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:54:49 1C5A588 c mother2 (0963&000000/0000/1519/5F:6B5ACACA4AD57368F559974AA4FFED20): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:54:49 1C5A588 c mother2 (0963&000000/0000/1795/70:33D2E8F0AA1340E2B20C57281CF2EA5C): rejected group (1 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:54:52 1C5A588 c mother2 (0963&000000/0000/1135/5F:73A9335C573B211CD1F74826C9354AA6): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:55:56 1C5A588 c mother2 (0963&000000/0000/11FA/5F:D4859E4547B371527AB86488B82926F3): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:56:01 1C5A588 c mother2 (0963&000000/0000/11FA/5F:32B9D871736ECFF7A20B105C0113BDFB): rejected group (1 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:56:06 1C5A588 c mother2 (0963&000000/0000/11FA/5F:07F9F00B2369ABC0311017D1BFAD6452): rejected group (1 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:56:14 1C5A588 c mother2 (0963&000000/0000/11FA/5F:1DCD92D5E698F922100FFA0373EBBC0B): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:56:22 1C5A588 c mother2 (0963&000000/0000/11FA/5F:5A78278C310BE16186831042D2C3DCE6): rejected group (1 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:56:30 1C5A588 c mother2 (0963&000000/0000/11FA/5F:1D1628A1AA46632B43F954937074E83F): rejected group (0 ms) (0/0/0/0) (no matching reader)
2013/04/13 16:56:38 1C5A588 c mother2 (0963&000000/0000/11FA/5F:67C4455B6277953476520264E2FE3847): rejected group (1 ms) (0/0/0/0) (no matching readerany help appricated
) -
It couldnt be easier.
1. Press "Menu"
2. Scroll down to "Network Local Setting"
3. Press "OK" on remote
4. Arrow right to "Newcamd Server Settings"
5. Press "OK" on remote
6. Enter newcamd server parameter
7. Server setting -ON-
8. TCP Port -eg. 13000- this MUST be forwarded in your router
9. Des Key 01 02 03 04 05 06 07 08 09 10 11 12 13 14 (Can be change to your own)
10. Add USER in Newcamd server User manager with green button on remote
11. Add username PASSWORD "Allow emm YES"
12. Press yellow to save the configuration .Now box is setup for server with 1 client and a reboot is always a good idea .
In the Client box with CCcam its the N: line to use for acces the server eg
N: server_ip_or_dns 13000 USER PASSWORD 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256this sound good ill give it a trying tonight i hope it works
-
help help
manage to get my debian server working with smargo
problem now is that oscam seems to crash on me after rebooting for the third time
ive have ftp my cccam.cfg to home/cccam
ftp my oscam.conf, server, user to usr/local/etc
everything seems to be lovely entitlement ok after a few reboots
can`t get into 192.168.0.xxx:8888
any help thanx in advance -
thanx i have removed those lines in cccam
when i open oscam my logs show
"Cannot open file "/usr/local/etc/oscam.tiers"
"/usr/local/etc/oscam.provid"
"/usr/local/etc/oscam.ird.
"/usr/local/etc/oscam.srvid.at the end it say
A0A9B08 r Error activating card.am i`m doing something
-
i ve tried everything still no luck i think my config are wrong
can one confim this for meCCcam.cfg
SERVER LISTEN PORT : 12000
PHOENIX READER PATH : /dev/ttyS0
SERIAL READER : /dev/ttyS0
SMARTCARD CLOCK FREQUENCY : /dev/ttyS0 3570000
TRY ALL CHIDS : /dev/ttyS0
BOXKEY : /dev/ttyS0 12 34 56 78
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
#WEBINFO USERNAME :root
#WEBINFO PASSWORD :password1
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :password2
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw#
N: 127.0.0.1 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
#
#
#
#
#
F: user1 password2 2 1 1 { 0:0:1 }
F: blah1 blah2 1 0 0 { 0:0:1 }
#
#
#
#
Oscam.conf[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
disablelog = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:000000[reader]
label = ***uk
protocol = mousedevice = /dev/ttyS0
detect = cdcardmhz = 358
mhz = 358
boxid = 12131415blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963
Oscam. user
[account]
user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1,2
au =****uk
caid = 0963[account]
user = blah1
pwd = blah2
monlevel = 0
uniq = 0
group = 1,2
au = ***uk
caid = 0963Oscam.Services
#
[Variety Pack]
caid = 0963
srvid = 125D,125F,1261,158B,151A,D2FF,D2FB,1710,D444,D7E6,C7A6,CC0A,1771,1775,1968,1DB5,1978,1DBF,13F0,13EF,13F3,196A,1DC8,1778,CC0B,1777,CC06,1773,CCBF,CCC4,CCC9,CC07,C481,D0FC,D101,168A,1843,CCCE,247C,247D,1979,1DCE
#
#
[Variety Pack HD]
caid = 0963
srvid = 0F15,0EEF,0F22,0F1A,0F10,0F28
#
#
[Knowledge Pack]
caid = 0963
srvid = 1839,183C,122D,138B,1220,1221,1222,2484,CBC9,122F,1966,1DBA,183A,CCB5,1969,1DE2,183F,CCD3,183E,CCBA,1841,D421,CCB0,197A
#
#
[Knowledge Pack HD]
caid = 0963
srvid = 0EF8,0F2D,0EDB,0F2F,0F30,0F2E,0F1C
#
#
[Style & Culture Pack]
caid = 0963
srvid = 11FC,1456,196C,1DCA,1965,1DB0,183B,CCDD,CD32,D2F9,1840,CCE2,183D,D43F,CB90,1DC4,13A1,CCD8,1652,1592,CB8C,CB91,D7AA,113A
#
#
[Style & Culture Pack HD][account] -
thanx for the quick response. i read a lot of post yesterday hence having a brain freeze
according to the tut i followed do i not ftp my cccam.cfg to cccam/home
and the auto script i used does it not support infinity usb phoenix
sorry to sound dumb i`m a newbie but quick learner -
help debian server plz just had a brian freeze.
ive install debian on old pc then run Automated Oscam/CCcam 2.1.3 Install Package For Debian 6 .
i have assigned static ip, subnet mask ,gateway etc.
i have an infinity usb phoniex and white sly card and want to shares with jst friends and family no reshares at the moment
what do i do now thanx in advance -
is this link still working. i clicked on it, it`s takes me to linux- share
thanx in advance any help apprstep by step guide here mate
Debian Linux server with CCcam auto install scriptIf your stuck anywhere ask but its pretty straight forward, How far on are you?