Posts by smartboy4u

  • looking for gigaup version 1

    dear friends i have seen a video on youtube flashing gigablue hd 800 solo with a programme called gigaup version 1. its a software like dreamup used to flash bootloader and image on gigablue hd 800 which is brick or stuck on boot. does anyone know about this programme or where can i get it from.
    any help will be appreciated thnx

  • Gigablue HD 800 Solo stuk on boot after flashing wrong image pleae help

    Dear friends i have a Gigablue HD 800 Solo, it was working fine untill the time that it crashed while using youtube. So i decieded to install a new image, it previously had a image of team red 2. Everything went fine i put the preflash files on the usb stick, put it in the box at the rear usb port then turned the box on. On the display it showed LOAD then after few minutes DONE then it didnt reboot itself. So i turned the box off took out the usb stick deleted the files on it put the image file on it and then again put in the rear usb port turn the box on, but since that time it shows on the display BOOT. To my surprise i had used the image of SE instead of SOLO. So I tried with the image of solo several times using different usb sticks but no succes. The usb stick doest flash like it did before
    i also tried the jtag method. Everything was perfect. the device manager shows usb device broadcom test adapter but when turn the box on and open broadcom studio 3 and click on devices 97325 it shows disconnected. I tried this several times but no succes. If required i can post the pictures all the steps and also the jtag device i am using which has two jumpers on it.


    Untill now i have got only half way succes by using the rs232 cable and using the vu+util it goes half way but doesnt go any further. i had seen on youtube someone using a software called gigaup like dreamup if anyone knows about it please let me know thnx


    which usb sticks r best supported


    i am stuck please help