If its a softcam you need to install, have a look here:
http://linuxsat-support.com/sh…ghlight=openatv+feeds+sh4
- - - Updated - - -
I think your receiver is sh4 chipset , only the last one on the list applies to you.
Posts by codar
-
-
Yes, it's in vip section, sorry.
First you'll need to assign your receiver a static port / static lease
You'll need to open 2 ports on your router, openwebif port and a streaming port.
These then need to be forwarded these ports to your receivers ip address (all done within your router)
You'll need a dns to be able to connect to your internal lan (no-ip / dyndns, updated)
Then, in order to see your webif, you enter your dns followed by your openwebif port in a browser window eg:
www.my.dns.com:1234 (where 1234 is your proposed openwebif port, also the colon is vital)
This should open your webif and will enable you to select a channel for viewing.
This stream then travels through the other opened port.
I'd advise you to change the ports from the standard ones and enable passwords / http authentication for your own security. -
-
-
Try changing in red:
QuoteDisplay Moreoscam.server
----------------------[reader]
label = skyuk
protocol = internal
enable = 1
device = /dev/ttyS0
caid = 0963
boxid = ******xx #( not needed as oscam can read sky uk boxid )
detect = cd
mhz = 450
cardmhz = 2700
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-g = 1
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
lb_weight = 100To this:
QuoteProtocol = Mouse
Device = /dev/ttyS0 # or whatever your com port isTaken from:
http://linuxsat-support.com/sh…nfinity+USB+Phoenix+oscam -
-
Would think they want you to swap the thompson hd one but if your other card isn't updated at this stage to jan of next year and your running it under oscam, you've either missed the update and/or have a problem with your configs/setup.
-
Quote
<2> If you are the supporter of a Pay Server DO NOT ask for support, your request will be ignored.
Please re-read the rules here:
http://linuxsat-support.com/misc.php?do=vsarules
Thread closed
-
Yes, just need to put in your configs.
-
Try it on another feed or in another house to see if you have the same result.
-
Quote
I have now extracted the file and I am waiting to get my line
Probably should have a good read of the rules at this stage.
http://linuxsat-support.com/misc.php?do=vsarules -
Another option would be a wavefrontier t90 or similar multi lnb fixed dish, no moving parts and technically a single dish.
Not as tidy or versatile as a motorized one but channel/satellite change would be instant. -
Username = root
No password entered/enabled when i configured the backup but if dcc is looking for one, try dreambox or linuxsat -
Any sd receiver should do i think.
-
You'll have to re-pair your card to your new non hd box then all should work, hopefully.
Here's a guide on how to do this:
http://linuxsat-support.com/sh…nline?highlight=pair+card -
Cccam is reported to have problems with uk cards now. You may have to change to oscam.
-
Make sure it is only the file you have dragged over to the usb, not the folder.
- - - Updated - - -
You could also try a different patch.
They are located here:
http://linuxsat-support.com/fo…erguson-Ariva-HD-Firmware -
I think that's a hd box, if you pair your card to it, you will almost certainly loose the ability to clear any premium content (sports/movies) when running it under oscam.
Only red cards paired to a hd receiver will clear premium content if boxid is entered, white cards won't. -
Connect a usb stick to your pc, then format it (fat32)
Extract out the download (winrar should do it)
Open the folder then your looking for the file called "A153Combo_20161103_V1.31B7_patch.abs"
Drag that file across to the root of your usb stick.
Remove stick and insert it into your ariva then follow the tutorial from post #2
(make sure you've backed up your channel list before flashing as it will erase it) -
You may have to get it paired to a sd receiver as they are phasing out the thompson hd receivers.
