Posts by codar

I doubt it would (probably different drivers etc) but honestly, I have no idea.
It was created on a wetek.

Backup image based on openatv-5.0-wetekplay-20150706

Included:

Autobouquets (set for ROI sd with hd swap enabled)

Custom "Favourites" Bouquet (Free to air channels)

Crossepg (set to 28.2. storage device set to usb/hdd)

Oscam ip of wetek:8888 usr=root passwd=oscam. Just add a reader in oscam.server file

Picons pack included in image (piconssnp8bit220x132: Credit goes to Oktus, pauldb and croke)

Linuxsat-support addons

Softcam feeds

Blue HD V3 skin as default by Rossi2000

Red HD V1.6 skin by Rossi2000

Matrix HD skin

Lan enabled by default

Installation:

You will need an sd card with a capacity of 1gb or larger. (I used a 1gb card but would recommend a 2gb+ card)

Format your micro-sd card using sdformatter (if the card has been previously used in your wetek, windows will not format it properly, it will only format the partition it recognises)

You can get sdformatter here

Extract backup image

Use Win32DiskImager to write backup image to sd card.

You can get it here

Insert sd card into wetek and power it on.

Have a usb/hdd inserted for crossepg (I used a sandisk 8gb formatted to ext3)

At this point, autobouquets needs to be configured for desired region (roi as default with swap enabled), auto download (not enabled by default)

Video output may also be changed (set to 720p as default)

I find a major improvement in sd picture quality with this build

Problems:

Time-shift and recordings do not work.

Still cannot grab a screen shot with either telenet or webif.

Red hd skin is very over-sized , can't find a way to resize it

Blue hd skin is also slightly oversized but manageable

Please report any (other) problems

If your using CCcam, try version 2.3.0.
You can get it ( and other cams/plugins/channel lists etc) from our addons panel here

Have you two feeds from your dish connected?
Have you signal on both feeds?
How are your tuners set up?
Can you watch a free to air channel and record another free to air channel?

Speaking of skins, rossi2000 Blue-HD V3 skin works really well. (latest build 20150704)
http://linuxsat-support.com/view.php?pg=openatv
I installed the linuxsat addons panel (version 1.2) and grabbed it from that.
http://linuxsat-support.com/showthread.php?t=30475
Still unable to grab a screenshot though with either telenet or webif.
Recording or timeshift didn't work for me on the latest build either.
I also have tried a few usb dvb-t tuners (rtl 2832, freecom dvb-t and sundtek mediatv pro) but had no joy
Sd quality looks to be improved with the latest build (I only tested it on a pc monitor though, no tv at work:angry:)

Does your friend have reshare enabled on his side?
Try putting the line into your receiver only and see if it clears ok.
Have a look here for extra c/f line settings:
http://linuxsat-support.com/showthread.php?t=4

Payment sent.

€300 offered on condition that it's posted to ROI. (€300 = £214 xe.com)
Let me know if your interested.

Vu zero dimensions:

Quote

• Dimensions (W x D x H): 165 mm x 145 mm x 30 mm

http://www.world-of-satellite.co.uk/VU/VU-Plus-Zero

Another one to consider:
http://www.world-of-satellite.…ate/Technomate-TM-Nano-SE

Quote

Size (WxHxD):
200x40x140 (mm)

Any linux triple tuner (dvb-s/s2 x2. dvb-t/t2) receiver should do it.
Whats your budget?
Any other special requirements?

These are Oktus saorview picons.
Size 100x60
They are in snp format

This is a settings backup configured for astra 28.2

Included:

Autobouquets (set for ROI sd with hd swap enabled) I have setup favourites with the standard fta channels although on first boot, they will show up as

Quote

n/a

until you select on them.

Crossepg

Oscam ip of wetek:8888 usr=root passwd=oscam. Just add a reader in oscam.server file

Picons pack (piconssnp8bit220x132: Credit goes to Oktus, pauldb and croke) on usb but user can change to desired pack

Weather configured for south of Ireland

Format your micro-sd card using sdformatter:

Quote

https://www.sdcard.org/downloads/formatter_4/

Extract openatv image (attached)

Write image (openatv-5.0-wetekplay-20150627) to sd card. I used Win32DiskImager from here:

Quote

http://sourceforge.net/projects/win3...atest/download

Insert sd card into wetek but do not power on yet.
Extract out attached backup.rar to your planned usb stick/hdd (you should only have 2 folders called "picon" and "backup_wetekplay")
My stick was formatted to fat32.
Plug in stick/hdd in rear, connect up lan cable (My backup was done using a lan cable connected as you could get into problems using wifi with encryption keys etc)
Connect up dish feed to lnb1 and power up wetek.
When prompted to perform a settings restore (after asking you if you would like to delete additional languages) select it.
Accept plugins install (If your using the original remote, press the back arrow button, bottom right of the remote, to toggle between number and color keys, then press 2 (which 2 is then = to green)
Press ok when “Execution finished”
Wetek should reboot onto BBC 1 HD.
At this point, autobouquets needs to be configured for desired region (roi as default), auto download (not enabled by default)
Crossepg will also need to be configured for storage device/provider etc.

If you would like to change weather location

Get weather-ID of your location:

Quote

http://open-store.net/index.php?page=metrixweather

Enter Location:

Quote

Dublin

Quote

Your MetrixWeather ID:7 56043

To use your location

Quote

560743

to show weather information - use Telnet:

Quote

init 4
echo "config.plugins.MetrixWeather.woeid=560743" >> /etc/enigma2/settings
init 3

With thanks to arn354

You can now perform an online update (gives you a nice openatv bootlogo and also adjusts audio between hd and sd channels among other updates)

Also remember to change time settings, which are set to gmt+1 as default

Problems:

Time-shift and recordings do not work.(even after online update at the time of posting)
I have mounted an external hdd and usb formatted to both ext3 and ext4 and updated timer/recording settings within image but only get a black screen.

Good luck.

OpenATV, OpenMB, Egami, Blackhole (ahem) Opendroid.
Have a look in here:
http://linuxsat-support.com/forumdisplay.php?f=1190

As Inspiral has pointed out the rules to you, I'm going to close this.

Have you permission from your line supplier/friend to do this?
Or does he provide lines in exchange for money?

Please read the rules, especially rule 2:

Quote

<2> If you are the supporter of a Pay Server DO NOT ask for support, your request will be ignored.

You've made your intentions clear about this in your post.
Full set of rules can be found here:
http://linuxsat-support.com/misc.php?do=vsarules
Going to close this now.

Are both feeds to the receiver working? (can you record a channel and watch any other channel)
Blackhole is up to 2.1.6 now so your image could do with updating also.
Before you attempt an update though, are you sure your receiver is not a clone as updating a clone receiver with an official image may brick it.

Vix don't support these receivers.
Any vix image available for this is not an official image.
There are other images though, which can be found here:
http://linuxsat-support.com/forumdisplay.php?f=1149

@Mckee, snap:thumb:

First make sure your usb stick is mounted
Then, if it is for 28.2, have a look at post #2 on this thread:
http://linuxsat-support.com/showthread.php?t=3192