win7 but i have ftp program
Posts by amosp
-
-
i dont use teamviewer,,,,,,,,stick to something simple
ok what your ad passvword
-
download an ftp program " i use filezilla " it will connect to your box and give you access to the files ,,,,,,provided you have setup your network,,,,,,,you can edit your cam cfg files from there,,,,for simplicity cccam is a breeze to setup,,,,,mg camd not to bad either,,,,,both of these cams are old school with no support anymore,,,,,,os cam is the choice at the moment,,,,,,,,,,,a lot of reading needed to get your head around it,,,lots of help and cfg files available here.good luck
hi do you have teamviewer and could it for me as this is all new to me
thanks
-
so you have no for your box ? think maybe you should flash it again and start over if thats the case yo need to know the passwords and port numbers to do anything
yes i do have passwords
-
run it on your pc , then use cccam line manager to add your cline and then clic save to dream this it for pc use
i do have a code can i not put this in my box
host -
port -
user -
pass -
deskey - 01 02 03 04 05 06 07 08 09 10 11 12 13 14 -
Have a look at this it has cccam line manager use it to load your lines it will be easier https://hotfile.com/dl/1498110…eam_Toolbox_v7.1.rar.html this will download when you clic the link all you need is your ip address
am green again do i put this on usb
-
yes use DCC and paste them in
FPT>ECT>CONFIG
you have me lost now ????? -
Install the the tspanel plugin/extension, you will then be able to install just about all the cams
channel list ect... you will get all you need this LOL
yes now have the channel how do i put codes into the cams ????thanks
-
HI THANKS BUT box DID NOT reboot automatically
thanks got it now where will i get my n.l uk channel lists install cccam
-
The Solo2 is very similar to the solo with flashing, but there is a few steps different. Here is a tutorial on how to flash the solo2 via USB.
1. Prepare your USB. It needs to be formatted to fat32, and the solo2 image needs to put into root/vuplus/solo2.
2. Insert the USB into the receiver while it is turned off.
3. Turn the reliever on via the button on the back and the press the touch sensitive button on the front of the solo2, until you see that it is flashing.
4. The box will reboot automatically.
5. If all is successful the display should now read "Updated, press power button"
6. Once you have pressed the power button, what ever image you have installed should now boot.
7. You should now be prompted with the setup wizard which is easy to follow.
8. Now all you need to do is upload your channel lists and install cccam.
Hope you enjoy the box :-)
HI THANKS BUT box DID NOT reboot automatically
-
No you wont loose anything with the online update but make a backup before updating just in case anything goes wrong.
HI NEW TO THIS I HAVE PUT BlackHole-2.0.2-vusolo2_usb.rar ON USB PEN AND IT WILL NOT UDATE MY BOX Vu+ Solo2
THANKS ALL FOR ANY HELP