Posts by sparky stu

Hi Guys and Gals

Merry Christmas to you all 1st

I have been a silly boy and purchased a new box to put on my home based server, I got a MediaArt7Ultra hybrid. I have no clue why, it just looked good in the shop lol.

Anyway, I have got my XBMC working fine, and will look at the ip TV side over Christmas when bored.

I have manged to get it to connect to my OSCAM 120 unstable, however I get a message on the users page saying incorrect protocol for newcamd

Anybody got/come across a problem like this in past or have any tips on how I tackle this.

Stu

I have 1 of these boxes in my kids room, However I was just messing with it yesterday as I have not really done anything other than get a firmware image and then channel list.

Most of the V TP's are showing 45% 10%, however these same transponders on another box in the house. All work. I have moved the F3s to the other room to check the it wasn't my LNB or cable and moved the TM800 to the kids room. Problem is still there.

So possible faulty box, but some of the V tp's work fine. So just a very odd thing for me to get head around.

Any tips of things to try. Otherwise its a door stop. The problem is I am running out of doors

Only thing I can see Nobby is I seem to have lost a year
21 11 14

hehehe

Thanks guys, I have no doubt I will be asking more questions in here.

Hi All

I am trying to get my head around the workings of OSCAM 1.20 unstable, and just wondering which tut is the most simple to start with. I will then look to play and progress on from there.

Stu

I am assuming your dish is fixed and only viewing a single sat on your box

Nope a quad LNB has 4 feeds, this will allow 1 to 4 boxes to be connected to it. You only need to connect the cable via the F-connector and put the other end in your box. Job done.

This is crazy

Just reflashed thing and using UR image, still can't get my TM500s to stay on when I change channel, tried IQ image and still the same problem. Something very odd here

Just thinking it maybe easier to reflash the thing and start from scratch,

anybody got a link for TM500 Super software, either back to Factory Default or E1 image

Nope, that killed my line also.

restarted the cam and nothing

I have an old TM-500 Super that I leave in my Caravan, yes I have an internet connection in my caravan.

Anyway

I was messing about with it in the summer and messed up a few things, I have sorted most of them out now.

I know this is something stupid but I just cant see it myself. Can anybody help me please

When I change channel I have to restart the cam every time.

Line works fine, no glitching or anything. But as the TV only has a scart lead in it, no point in using a newer box.

CWS_KEEPALIVE = 300 Tried with and without
CWS_INCOMING_PORT = 18000 Tried 18000 and my server port
CWS = 127.0.0.1 10000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs tried with and without these lines in
CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs tried with and without this line in also

CWS = severname port user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

mg_cfg

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show any ECMs
# 01 show only valid ECMs (default)
# 02 show valid and bad ECMs with complete data display
C: { 01 }

# AU
# 00 disable
# 01 enable
# 02 Auto
# 03 network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 replace (not add) http-aes keys, only first key replaced !
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 300 }

# network shares priority
# 00 newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd
# 02 newcamd, camd3, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 Off
# 01 Network
# 02 console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 07 }

# urls for aes keys update, any number or urls allowed,
# url data must contain key in format 0500:007C00:0000000000:00:key1:keyl
# W: { host.com - Informationen zum Thema Host. Diese Website steht zum Verkauf! }

I just can't see what I am doing wrong

Cheers matie, I will give this a try later when I get home

Hi all,

I am currently trying to figure out how to log into my server from my phone when out and about. No real need to do it, just figure it would be something useful to have. My ip is static, I have opened up a port on the router and enabled remote access and can see my router, but how do I look for the ip of the pc if at all possible?

omnikey usb

I can convert it, not a problem. Just need to know where I have to put it after.

again, that is part of the problem, the server was set up for me. I have no idear where to find the configs. If you let me know where it is to be found I can copy it and post here

HI all

I have just purchased a 2nd card reader for my linux based PC server. I need to add in another card reader and also while I am at it I have got a a line from a euro server that has reshare on it, I am still learning the ropes and just wondering if there is a tutorial somewhere that will help me fill out all the boxes, or if not can somebody point me in the right direction. I have no doubt that the info is on oscam.wiki somewhere, however I have spent several days going through loads of stuff and unable to track down the info needed.

Stu

I have already joined and donated there also

I will speak with AL and ask him to start a thread and link it back into here. Just in case somebody over there comes across the same kind or problems. I do think it should be ran past AL for him to start the thread as is going from 1 site to another.

Flash worked, currently running the autoscans, just press the button and let the box do the rest for you, says it take around 10 mins, so just enough time to pop the kettle on and come back to a box already done.

Messing with the DCHP did not work, Currently reflashing the box

To make life simple, what you will need is
a Null Modem Cable
DreamUP (software) just google it if you do not have it already
Commando 14-7 or newer, available on this site also as a sticky

http://linuxsat-support.com/dm…-commando-14-7-dm500.html

and about 20 minutes, if you do not know how to use DreamUP, type it in at youtube.

As there seems to be no other way to solve this problem other than a reflash, I am happy for this to be closed if Mods wish or leave open at your choice.

With a Big Thanks to AL aka PaphosAL for taking the time to help me out with this problem

Hi Guys and Gals

I will try the DCHP before I try what PaphosAL has advised me to try, Just on the odd chance it works, however this was the option given to me by Al, as you can see he was 1 of the 4 guys that wrote Commando 14.7

OK, Stu- I think you need to start from scratch and reflash using DreamUP with a null-modem rs232 x-over cable from a pc or lappie that has a genuine 9 pin serial port.

USB to rs232 adaptors are nbg for this job.

"Removed next part of the reply as comment are not relevant to other people".

But once you have C14.7 safely on these boxes, the future gets dead easy. For you can then Backup image / Reflash image via the Services menu (unlike in Enigma).

Cheers- AL

I will leave it mate, almost 2 years old, thanks for the reply anyway