i`d try another PSU mate from a working DM receiver.
the PSU could be on its way out?
I have tried with a working 12V 2A power supply cable wich ive tested on another clone dm800hd and know is working, also there isnt a seperate power board inside the box just 1 board..
Try with optiflasher m8.
Read this thread http://linuxsat-support.com/showthread.php?t=35293
there is a guide in post #9
Thanks mate but the box will not even enter STOP mode and show any ip, I've an ethernet cable in it connected to my router and i'm holding the power button while plugging a proper dm800 power supply into it, now i've been talkin to the owner this morning and he thinks he may have used the wrong power cord.... :-o ... so i'm guessing it may be fried and for the bin, I can solder and have all the gear here if anyone knows what would need replaced if its even possible to repair,
Hi all, I have my cousins clone dm800hd here sim 2.10 ssl84, When i plug the power cord in it flashes the red led once then thats it, nothing else, I've tried the No CA Found repair tool which completed successfully but didnt help, then i tried a clone patched dreamup on an oldish pc with serial 232 cable to flash the ssl84 bootloader.nfi file to try get it back to life, that didnt work either, Then tried flashing an entire openpli ssl84 image and also tried with merlin image which i know worked on it before and then got this error when box reached stage "flashing from memory" Flashing Failed (!!! 002 CRC failed), box will be unusable now, I am also unable to flash via network as i get no response when i try powering box on with the power button held in, Any help would be great, may aswell give it a go fixin it before it gets binned.... :-)
Also how do i add CCcam EMU to this box so it can use my line?? I usually would have got them from tspannel on any other enigma 2 box but not sure about this one,
Time to crack out your soldering iron and replace the caps on tuner board. Common fault. There are a few tutorials on here.
Sent from my GT-I9000 using Tapatalk 4 Beta
I only just got the feckin thing...lol... Ive had a look inside and they've already been replaced.... Could they still be at fault?? Also none appear to be swolen....
tuner b still works though??
Spoke too soon.... tuner B also just stopped working??? tested sat feed in another box and its fine with pretty good signal??
--Update--
tuner b is sort of working, shows no signal and freezes on hd channels but normal channels seem to work ok..
Sorry my mistake, i missed that part....lol... Ok so i got the image installed and working on the hdd now i got a new problem.... Gettin no signal on tuner A even though it's configured correctly and the sat feed is fine, tuner b still works though??
I have now installed the nand version of hyperion and got that working ok but now when i try to ftp the file "PKT_ADB_BOX_E2_HYPERION.tar.gz" to the HDD it stops at 14% sayin
Copying files to remote side failed.
Failure writing to local file.
Is there another way i can install this or is there a way to fix it so i can ftp it accross?? I thought maybe the wireless was droppin so i put a ethernet cable between my laptop and the nBOX and shared the internet connection but still it failed the same way...?
(Edit)
I've also tried a different version of winscp and also tried a different computer but still no joy
Ive reached my download limit...lol Tryin to get the nand version of hyperion
(is it not Polish Koders Team?) ]
9fd8af6d6b1c.jpg
................................................................................................................
Yes i got it changed back to english, Did you see the pic i sent in post 11??
Immediately after you switch it on it should say either NBOX or BOOT
nBOX.................
Back to english... Thank you.. :-)
Display MoreWhen you boot up the image - what does the splash screen say? This should tell you what the image is.
What uboot is your image using? in other words - does it say NBOX or BOOT on the front panel as soon as you boot the receiver?
depending on the image - this may help to change the language to English
u-boot 1.3.1 053
that isn't the process - still confused as to what image you have installed Polish Kathi Team? This sounds like the team (is it not Polish Koders Team?) that built the image, not the actual image. Do you know what bootloader you are using?
http://linuxsat-support.com/nb…box-5800s-how-change.html
I just followed that tut and now have duo multi boot installed....As for the image on it. im really not sure, its all in polish so i cant read anything...lol
Done...lol
Thanks musogeek, I've ftp'd the iimage file rootfs to the root of the hdd but not sure how to install it ..
I cant find the pkt install manager??lol
Thanks reeves1985, i'll try that now, Which one would you recommend?? It's for my brother who's kind of useless when it comes to this kind of stuff so the more user friendly the better..:-) And one more question, what about channels lists, can i use dreambox edit to copy the existing E2 Bouquets i have??
