Display MoreDisplay MoreCan you add support for DM800Se chipset ?? I hope you understand now
if i have time, i will try to add
but i have no idea if it will work
As long as you make it recognise dm800se chipset and name, then we can use nfidump to install images.
yes i know, thanks
Can you add support for DM800Se chipset ?? I hope you understand now
if i have time, i will try to add
but i have no idea if it will work
Update New Version 3.9.1
- fixed pre-installation issues !
- minor bug fixes !
(for download go to first message)
M8, I have reinstalled everything, this time OpenATV in flash, installed NeoBoot by you, updated it, mounted a USB stick and put 3 images in the ImagesUpload folder - and the plugin can not see them, so I can't install anything... I have no idea what or how this is happening but there it is...
"No device found suitable for installation" but the USB stick in EXT4 is mounted etc. ("Working location: /media/hdd/"). Of the 3 options given only no. 1 works, 2 and 3 do not.
I will now install PurE2 6.3 in the flash and try again...
what is stb?
chipset is Hisilicon 3716MV410
i try to add but i can't test...
Managed to install the plugin on James Donkey HD Duo... DLed additional packages but then... CANCELLED as "incompatible box..."
this box not supported but, what is chipse of this box? maybe we will have a chance to support...
Hello Thawtes, thank you for advising me. Unfortunately my Drambox800 HD PVR original is not supported almost by on one nowadays. I will try to find latest OpenPli image but I am afraid there is no such newer image even homebuild based on OpenPli. About OpenATV I do not know but I will try to find some. I use homebuild OpenPli image created by elhawary for original Dreamboxes in 2018. You mean regurarly to expand flash memory with the help of USB. Ok I understand I did it before already. I am not a computer expert or something like that I do not know exactly at where is a downloaded ( and played back) video being stored ( if on the flash memory first and then when played on RAM memory and also why creating the swap file by size 512 MB on USB stick did not help me). Thank you much in advance, regards.
look this thread openvision-enigma2-develop-english-7.3-r76-dm800 (OriginalBox)
maybe this image might work dor your stb
Hello Thawtes, thank you for advising me. Unfortunately my Drambox800 HD PVR original is not supported almost by on one nowadays. I will try to find latest OpenPli image but I am afraid there is no such newer image even homebuild based on OpenPli. About OpenATV I do not know but I will try to find some. I use homebuild OpenPli image created by elhawary for original Dreamboxes in 2018. You mean regurarly to expand flash memory with the help of USB. Ok I understand I did it before already. I am not a computer expert or something like that I do not know exactly at where is a downloaded ( and played back) video being stored ( if on the flash memory first and then when played on RAM memory and also why creating the swap file by size 512 MB on USB stick did not help me). Thank you much in advance, regards.
512 MB USB very little, use minimum 4 or 8 GB usb
Hello thawtes, thank you much for giving me some advice I am already desperate and no one have not help me so far at all. Finally I played back some youtube videos but only a very few ones (I do not guess if it depends on video size, probably so or where is the problem). Mostly my device gets stuck at buffering (mostly at 99 percentage or sometimes less). I do not know about any newer image for my old device DM800 HD PVR original, I think it is not so old image from 2018 year. I have put a USB into my device and used the swap manager plugin and with the help of it I have created 512 MB swap file on it. My image OpenPLI-original-dm800-20180327elhawary takes up 49,9 MB in a flash memory from 60 MB of total size. I though it should have helped but it seems to me it has not helped much. My problem is persisting. Are you sure if I would expand the flash memory it would help? What is the difference between flash, ram and rom memory? Do I need to expand all of these memories? Do you guess why I receive constantly this error report "authpriv.err vsftpd: pam_listfile(vsftpd:auth): Couldn't open /etc/vsftpd.ftpusers" for every time when my device gets stuck at buffering? Thank you very much, you are the only one who is willing to help me. Regards
this mistake is interesting!
I do not know about your image
I guess image you use is mod or clone image?
Install latest build PLI or openATV image and expand flash memory..
Display MoreSorry, I have not put entire post of mine, here it is again, do not delete it MasterG...
Hello, please can you give me an advice how to fix the following problem. I can not play back any Youtube video on my device Dreambox800HD PVR original. Youtube plugin enigma2-plugin-extensions-youtube_h1+git426+facf15b-r0.0_all.ipk (by Taapat) does not work for me. I have this image installed on my device OpenPLI-original-dm800-20180327elhawary. It is homebuild image by Elhawary not so old year 2018. When I run this Youtube plugin so my Dreambox 800hd stucks at buffering (mostly at 99 % or less) for every time. I have built-in Media Player and also VLC video player installed in addition. I do not know which of them should play back a video. Thank you much in advance...
I use to get this important error every time (between some other not so important ones):
"authpriv.err vsftpd: pam_listfile(vsftpd:auth): Couldn't open /etc/vsftpd.ftpusers"
Here it is my vsftpd.conf file, please can you check it out and tell me where are bad values in settings that cause the above error?
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
# run standalone
listen=NO
# No PAM sessions to save resources
session_support=NO
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=NO
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=NO
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftp
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option is examined if userlist_enable is activated. If you set this
# setting to NO, then users will be denied login unless they are explicitly
# listed in the file specified by userlist_file. When login is denied, the
# denial is issued before the user is asked for a password.
userlist_deny=YES
#
# If enabled, vsftpd will load a list of usernames, from the filename given by
# userlist_file. If a user tries to log in using a name in this file, they
# will be denied before they are asked for a password. This may be useful in
# preventing cleartext passwords being transmitted. See also userlist_deny.
userlist_enable=NO
#
# If enabled, vsftpd will display directory listings with the time in your
# local time zone. The default is to display GMT. The times returned by the
# MDTM FTP command are also affected by this option.
use_localtime=YES
#
# If set to YES, local users will be (by default) placed in a chroot() jail in
# their home directory after login. Warning: This option has security
# implications, especially if the users have upload permission, or shell access.
# Only enable if you know what you are doing. Note that these security implications
# are not vsftpd specific. They apply to all FTP daemons which offer to put
# local users in chroot() jails.
chroot_local_user=NO
#
allow_writeable_chroot=YES
#
tcp_wrappers=NO
local_root=/
- use latest build image for your device
- expand rom/ram with usb (search forum how to expand flash , ram ,rom ...)
I'm a new openATV user, I use Amiko Viper Combo HDD.
Many thanks for the repair, youtube works flawlessly again.
I'm glad, you are welcome ...
if you don't want to wait
go to /usr/lib/enigma2/python/Plugins/Extensions/YouTube with FTP
delete YouTubeVideoUrl.pyo and YouTubeVideoUrl.py
my attached file YouTubeVideoUrl.py upload to /usr/lib/enigma2/python/Plugins/Extensions/YouTube
reboot or restart gui enigma2
have fun !
I added the necessary fix, but Taapat has not yet accepted pull request
this commit https://github.com/Taapat/enigma2-plugin-youtube/pull/66
will be fixed soon
do 3.9 works with vti on flash? i got a ultimo4K.. i will vti on flash because many things runs better for vu+
I haven't tested yet
you can test it yourself
Update New Version 3.9
- incorrect mounts bug fixed !
- VTi image run issue fixed !
- SF8008 image start issue fixed !
- code cleanup
- Activate Online Updater
no thanks..! openatv is a horrible image running on vu+
when this plugin support vti an flash it will be great..othwise not for me
It's your choice, openATV is best for me !
VTI fix v.3.9 will also be included...
main and my favorite
try
install main image (flash) openatv 6.3/6.4
install this mod ipk and usage
selam.. ellerine saglik. I use the vti 14.05 - does it work on it 100% ??
vti is main image or multiboot image?
