Cannot be done with USB as main bootloader needs to be updated to 1.04 this can only be done with RS232
Posts by hopper
-
-
Upgrade mode
you first load the FW make sure the box is turned off
Hit the NEXT button then plug in the box
If all is correct the flash will start working, can take about 15 to 30 min to finish -
Have you checked the serial port
if its usb to serial then maybe the one you have is not working or talking to the box -
It looks like you are not connecting to the box "Transfer data failed"
So you are not able to flash the fileAre you using the files I uploaded to this thread and you have the mini combo ?
-
you might want to try this also
-
Hi
Only now and next on these boxes
I have used them with terrestrial and can get 24 hours EPG
but for what you are looking for only now and next -
Go back a few threads and you will find where I have put up the loader and FW needed to fix this problem
Most of the FW's use the old bootloader 1.03 and these boxes now need 1.04You will need to serial into your box to fix this, very easy to do
-
New FW for mini combo
Enjoy
-
LOL these all well out of date
do a search and you will find the latest ones. -
Once the flash finishes just power off and on the unit making sure the RS232 cable is disconnected in case it tries to flash again
It should boot up for you -
Sorry to jump on this, but with a jailbroken PS3 if you copy your games can you play them on line or do you face getting banned like on xbox
-
What FW did you flash to the box?
Also try a different HDMI cable I have seen strange problems caused by faulty HDMI leads in the past.- - - Updated - - -
You can try this FW
-
Hi
Try this loader I see your chipset is 3606
-
Nope
This one is :)
Make sure you backup your channel list before you update to this.Enjoy
-
Hi ilche2002
This is the software you need select (Loader Amiko)
Connect up everything but leave the box turned off
Run the software setup your com port, no need to change any of the com settings.
Add the FW for your box click NEXT
Now turn on the box if all is good then it will reflash for you.
As nano said usb to serials cables can cause problem it took me a few models before I found a cable that worked for me -
Connected to the coax is correct
You need to enter the settings for VM manually I've seen the settings somewhere here
I'll see if I can find them for you later. -
How are you connecting with the RS232
Can you give steps so I can help youStarting with the software you are using and step by step
-
Hi
This is the correct EMU for the mini combo -
Hi
Hope this helps
-
New list
Enjoy