Posts by largeDish

Hi Stevejo,

Thanks for the reply. Yesterday I remembered I had an old Viaccess receiver, dug that out and it initialised the card. Looked and saw card had been activated for two days after first pluged into Dreambox. On being put into proper box card authorised to many months ahead.

So what I need to know is what is wrong with my Oscam configuration that it didn´t initialise and switch on the card? This probably means the card wont AU.

Looking at your config above, have I got the card speed wrong (even though card working now)? And if possible can you explain why mhz is slower than cardmhz? Should I delete lb_weight = 600 from my script (never understood it). Also audisabled = 1 , does that allow or disallow AU on internal card reader?

As a side note and for completeness there is a typo above P:0500:042400:0342 should read P:0500:042400:0324 and there is another srvid 0326.

Thanks

Hi,

I have recently got this card. I had JSC woking on JSC1 and JSC2, with the following config. Changed a few parameters and they went off, have put back and left over night but still no JSC.

Can someone point out where I have gone wrong please?

Oscam.config

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
saveinithistory = 1
PreferLocalCards = 1
# logging
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /opt/oscam/cw
# monitor
[monitor]
port = 988
nocrypt = 127.0.0.1
aulow = 120
monlevel = 1
# web interface
[webif]
httpport = 16002
httpuser = admin
httppwd = password
httprefresh = 10
httpallowed = 127.0.0.1,169.254.224.1-192.254.224.255
# protocols
[cccam]
port = 12000
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.1.3
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 1
[newcamd]
key = 0102030405060708091011121314
port = 34000@0500:042400,042410,047500,FFF920
keepalive = 1
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
request_mode = 0

Oscam.dvbapi

I:0603:000000
I:0627:000000
P:0500:042400:0321
P:0500:042400:0322
P:0500:042400:0323
P:0500:042400:0342
P:0500:042400:0325
P:0500:042400:0A8D
P:0500:042400:0A8E
P:0500:042400:0A8F
P:0500:042400:0A90
P:0500:042400:0A91
P:0500:042400:0FAE
P:0500:042400:0FA3
P:0500:042400:1131
P:0500:042400:1132
P:0500:042400:1133
P:0500:042400:1134
P:0500:042400:1135
P:0500:042400:1136
P:0500:042400:1137
P:0500:042400:1451
P:0500:042400:1452
P:0500:042400:1453
P:0500:042410 1
P:0500:047500 1
P:0500:fff920 1

Oscam.server

[reader]
label = JSC
Protocol = internal
Detect = cd
Device = /dev/sci0
mhz = 357
cardmhz = 357
Group = 1
caid = 0500
ident = 0500:042400,042410,047500,FFF920
blockemm-u = 0
blockemm-s = 0
blockemm-unknown = 1
block-g = 1
EMMCache = 1,3,2
ecmcache = 1

Oscam.services

[JSC]
caid = 0500
provid = 042400,042410,047500,FFF920
srvid = 0321,0322,0323,0324,0325,0A8D,0A8E,0A8F,0A90,0A91,0FAE,0FA3,1131,1132,1133,1134,1135,1136,1137,1451,1452,1453

Oscam.user
[account]
user = Home
description = DVBAPI
disabled = 0
uniq = 1
group = 1
AU = JSC
caid = 0500
indent = 0500:042400,042410,047500,FFF920

I just read on the web that the codes for JSC change every two hours, is this true? Maybe the reason why every CCcam or Oscam version and config file I try doesn´t work (if card is already off).

Thats what I was thinking, you can change Dreambox MAC addresses so I wondered if you could change these units?

A quick question, if I got one of these units, setup with a monthly sub, is there any way I could buy a second unit and clone it from the first, so I could watch two channels in the house with one sub?

Hi,

I have a Dreambox DM500S running CCcam. And an activated JSC card. The card will not work in my Dream box (either, I have 2). I have tried many different config files for it and different versions of CCcam, but stil no joy.

Can someone tell me the best CCam version to run for JSC I***** card and point me in the right direction of a working config file?

Thanks

Ok got Norwegian card now. Thanks for all the help.

Ok I seem to have made a mistake.

The card is Danish and I get DR1 and DR2. The card has updated in CCCam for these and these channels continue to work. This is a new card and when I recieved it it had working DR1, DR2, NRK1, TV Finland and Polish TV channels. All these other channels have gone off.

When I look in card info all packages are now expired except TSS, so this isn´t a Canal Digital Nordic package (as all these show yesterdays date).

So the questions I have are, for Oscam what is the CAID for TSS, and should I be able to get NRK1 and TV Finland on this card/sub?

Also any idea where I can get a subscription to NRK1 outside of Norway?

Thanks

Hi Master G, I tried Oscam with your configs, no picture. I have tried various DM500 and various configs found on the net, but no picture. Any idea where I can download a working Backup.img file?

Thanks musogeek & master G. Will try both your suggestions and get back. Amazing help.

Wow,

Thanks for the incredibly fast replies.

CCCam config is:

SERVER LISTEN PORT : 12000
SMARTCARD CLOCK FREQUENCY : /dev/sci0 3430000
BOXKEY : /dev/sci0 xx xx xx xx
f: User1 pass1 1 0 0 { 0:0:1 }
c: 169.xxx.xxx.1 12000 Slave1 test1
f: User2 pass2 1 0 0 { :0:1 }
c: 169:xxx:xxx.2 12000 Slave2 test2
f: User3 pass3 1 0 0 { 0:0:1 }
c: 169.xxx.xxx.3 12000 Slave3 test3
f: User4 pass4 1 0 0 { :0:1 }
c: 169:xxx:xxx.4 12000 Slave4 test4

I see posting this one mistahe I made - copying my ***Card CCCam config I have included the Box Key. I can delete that!

Master G, when I set up for this card I tried for ages to get Oscam DVB API working but no luck.

Hi,

I have a canal digital Nordic card (Conax) that I got already activated. It is in a clone DM500 box which is running Open PLi with CCCam 2.1.3. The card is not updating and will switch off in a few days.

Can CCCam update Conax cards? And if so what am I missing for it to do so?

Thanks in advance

Hi,

I thought I had all this working OK. I have been using two DM500S clones connected together via an Ethernet switch box and all has been working well. Boxes running PLi and Oscam DVB API.

Now when I add another dreambox to the switch box, only one of the slave units clears the picture at a time. You can switch to one box, it works, switch to the other it doesn´t. A few seconds later the first one isn´t working and the second one is (Master box always working).

Also it doesn´t seem to matter what User or Password I put into the slave units (even if its not one on the Masters config file - how is this possible?), one unit clears a picture at a time.

Any idea how I can get the three units working simultaneously?

Thanks in advance