Do you already have SSL 84D, or you need one. If you need to put it, I'll attach it.
hi
i am not concerned ====> i am talking to "Bangkok"
tx a lot
if a remember well 84d is include in this flash , else the loader will do it …..
Do you already have SSL 84D, or you need one. If you need to put it, I'll attach it.
hi
i am not concerned ====> i am talking to "Bangkok"
tx a lot
if a remember well 84d is include in this flash , else the loader will do it …..
Please could someone help me out i have dreambox 800 hd clone with this image in it
dm800se Enigma2 Version: ramiMAHER-tarball Image Version: TSimage_3.0 Exp 2013-12-02 Frontprocessor Version: V3 Webinterface Version: 1.7.5
I would to update this box with new image but i find nothing that works , everytime it says wrong image .
could someone tell me what i have to do ?
hi
the ssl = boot must be at least 84D then you will be able to upgrade , use openpli 6.1 pour clone ( sim 2.10)
please tell me……….……
regards
ok thank s can you how iptv work can i get it in with usb with the m3u
hi,dag,bonjour
you say :
even een vraag op die estar staat openpli 3 kan ik daar mee mijn iptv mee afspelen via url of m3u
thanks voor je reactie
translation:
just a question : on this estar i have openpli3 , can i with this one , use my iptv with "url" or "m3u"
answer: please see there upon "EMOSIM" because they use a kind of sim that enable you to do more….
antwoord : aub kijk hier derop voor "EMOSIM" omdat ze gebruyken een model van sim die nog meer zal doen
regards,groeten,salut
hi
you say : Can some one help me with a tutorial for flash a clone dreambox dm800 hd se with sim e-star v 3.0 ,:popcorn1:and new firmware voor Play my iptv m3u
my answer : estar is NOT a "clone" and there is no more new firmware !
a had the same "sim Estar" i did change with a sim 2.10 that will enable you to flash with ALL firmware for CLONE
u moet een andere sim aankopen de naam is sim 2.10 en dat kost +/- 35€
regards
I think that this image is for sim2 card not estar card.Please remove this image to proper section so our members wont get "no ca found" in their boxes.Best regards to all.
hi all
you are both wrong !!!!!
this firmware work perfectly on 800 HD SE sim ESTAR boot 84D
use optiflasher to change boot from 82............to 84....to 84D estar !!!!!
regards
hi all
sorry if i am not at the good place ......
who can tell me the names of clones for a " sab unix f+ solo HD "
is it a clone of a dreambox or a VU ?????
hard to find infos about that box :~(
thanks in advance
regards
hi
i suppose that you use only flash for Estar !!!! do you ?
with only : ESTAR DreamUP 1337.exe ?
with optiflasher with MUST says the prog that it is an Estar sim !!!!!
regards
buongiorno pigiut206
? me reconnosco ?
entro il 2015, ora di conseguenza, il convertitore non è aggiornato!
amicizie
hi
it's only for Estar chips and for 800 HD sim2 (clone) 2.01<=====
regards
hi Nano
i found this tutorial very very good.....
with your permission , i made a translation for my friends ....in french
i suppose it will be interresting for other members.
thanks a lot for your tutorial
1. Remarque concernant CCCaminfo.php (Autoinstall) et Windows 7 / 8 avec I.E 10
Si vous avez l'intention de mettre à jour vers Internet Explorer 10 , prière de bien y réfléchir avant de le faire.
J'ai essayé 3 différents CCCaminfo avec programme auto install et pas un eux ne fonctionne avec Internet Explorer 10. Si vous avez installé I.E 10 vous ne pourrez pas le désinstaller facilement , donc vous devrez alors indiquer à CCCaminfo d'utiliser un autre navigateur.
La version du CCCaminfo pré-Installé que j'utilise (DragTeam v 0.86 DT2) just se ferme dès que le navigateur s'ouvre sous I.E 10. Si vous utilisez cette version de CCCaminfo.php il est recommendé de overlay les fichiers from v1.02 par toogoody au dessus des fichiers dans le dossier HTDOCS de la version 0.86 trouvée dans C:\Program Files (x86)\CCcamInfoPHP v0.8.6 (DT2). Celà les mettra à jour vers 1.02 et stoppera les fausses lectures high ecm que vous aviez avec 0.86 et toute version de CCCam après 2.0.9.
Pour avoir CCCaminfo qui tourne sans qu'il se ferme , installez un autre navigateur tel que Opera ou Chrome par exemple.
Allez dans le dossier oû CCCaminfo est installé par C:\Program Files (x86)\CCcamInfoPHP v0.8.6 (DT2)
Vous aurez alors à éditer un fichier appelé pms_config
Changez le type de navigateur en external et puis mettez le cheminvers le navigateur que vous allez utiliser. Ce peut être Chrome, Firefox ou tout ce que vous désirez utiliser.
[Browser]
;--- Le navigateur qui est démarré après le démarrge du server (possible values: IEXPLORER, FIREFOX, MOZILLA, DEFAULT, EXTERNAL)
BrowserType=external
;--- options de commande du navigateur like -k (PAS utilisable pour le MOMENT)
BrowserCommandOptions=
;--- chemin vers un navigateur externe qui sera utilisé au lieu du navigateur d'avant
BrowserPath=C:\Program Files (x86)\Opera\opera.exe
;--- Spécifiez le format "caption" text de la boite de dialogue Work Offline . Vous pourrez utiliser plus d'une captions (séparées par ; )
;--- Les formats "captions" pour german, english, french, dutch and spanish sont incluses par défaut
WorkOfflineTitle=
;--- La taille du navigateur démarré . peut être une dimension en pixel (1024x768) ou des valeures MAXIMIZE et KIOSK (Internet Explorer seulement)
BrowserSize=
Vous devriez avoir , à présent , CCCaminfo.php qui fonctionne dans des conditions optimales
fonctionnant de nouveau avec son propre navigateur , rapide et flexible contrairement à Microshafts bloatware I.E 10
Nano
Attached Files
o CCcamInfoPHP v0.8.6 (DT2) install.rar (6.87 MB, 364 views)
o CCcamInfoPHP_v1.02.zip (71.0 KB, 157 views)
Last edited by nano; 06-02-2013 traduction française de Satamuse 12-oct-2014
:shocked: here on this site !!!!
regards
hi
i found with a search on google:
BlackHole for DM-800HDse Clone Patched sim2.10 Black Backup by tytus 56 06.05.2013 new bootlogo
regards
BH=blackhole
hi canthackit
i know "yes" for my "estar" chip !
may i suggest you say first the full name of your receiver ( mine is dreambox 800 HD SE )
may i suggest you say secondly the kind of chip it use : mine is an "estar" clone
they are 5 kind of chips (puce) .....
it dépends of it ....to get the right flash/image !
regards
hi stupidmonkey
you said:
Its not working, sure the file is right, its been suggested that i need to start.restart the cccam on the xp1000 - how do i do this?
for my dreambox800HD SE i go in menu , then in blue panel menu , then in "CI-softcam " menu <======
then i click on "start again"
regards